SPECS SUMMARY

Net Power - SAE J134968 mm H2O (51 kg/mm)
Dig Depth - Standard14.3 ft (4348 mm)
Operating Weight - Maximum24251 lb (11000 null)
Experience the new Cat 415F2 Backhoe Loader with features including spacious operator station, optional pilot controls, superior durability and outstanding performance. Safely operate on the job site with quieter hydraulics, increased visibility, and the ability to have four wheel braking engaged without wearing on tires or drive train.


Specifications

-Net Power - SAE J134968 mm H2O (51 kg/mm)
-Dig Depth - Standard14.3 ft (4348 mm)
-Operating Weight - Maximum24251 lb (11000 null)
-Cab - ROPS/FOPS359 lb (163 null)
-Four Wheel Drive392 lb (178 null)
-Air Conditioning101 lb (46 null)
-Counterweights - Option 1255 lb (115 null)
-Counterweights - Option 2530 lb (240 null)
-Counterweights - Option 31015 lb (460 null)
-Bore3.9 in (99 mm)
-Stroke4.33 in (110 mm)
-Displacement207 in³ (3.4 B)
-Pump TypeVariable Flow, Axial Piston
-Feature (10)Direct injection fuel system provides accurate fuel delivery and efficiency.
-Feature (15)Higher low end torque for better engine/machine performance.
-Feature (16)Engine is equipped with electric fuel priming pump.
-Feature (14)High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
-Feature (13)Standard glow plug starting aid system for efficient cold weather starting.
-Feature (11)Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
-Feature (12)Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
-Feature (1)Regeneration is passive and does not require any input from the operator or disrupt work.
-NoteEngine meets U.S. EPA Tier 4 Final emission standards.
-Rear Axle - Dynamic20233 lb (9186 null)
-Feature (3)Foot operated brake pedals can be interlocked for roading.
-Feature (2)Self-adjusting, completely enclosed and sealed.
-Feature (1)Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
-Dig Depth - E-Stick Extended17.9 ft (5441 mm)
-Feature (4)Parking/secondary brakes are independent of the service brake system.
-Feature (5)Parking brake is mechanically applied through an adjustable hand lever located on the right console.
-Rated Net Power - ISO 924968 mm H2O (51 kg/mm)
-Rear Axle - Static50582 lb (22964 null)
-Feature (2)Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
-Net Peak Torque - 1,400 rpm307 ft-lb (416 N·m)
-Rated Net Power - SAE J134968 mm H2O (51 kg/mm)
-Feature (9)Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
-Choice 1Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
-Turning Circle - 2WD/AWD (inner wheel not braked) - Outside Widest Loader Bucket36 ft (10.97 m)
-Turning Circle - 2WD/AWD (inner wheel not braked) - Outside Front Wheels26.8 ft (8.18 m)
-Axle Oscillation11°
-Choice 2Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
-Choice 3Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
-Choice 7Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8
-Choice 6Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU
-Choice 5Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4
-Choice 4Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH
-Cab - SoundANSI/SAE J1166 OCT98 is 79 dB(A)
-Cab - ROPSSAE J1040 MAY94; ISO 3741 1994
-Feature (7)Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
-Feature (6)For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
-Feature (5)For durability, inlet valves are nitrided, martensitic chrome silicon steel.
-Feature (4)Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
-Feature (8)Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
-Front Axle (4WD) - Static50582 lb (22964 null)
-Cab - FOPSSAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
-NoteRequires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
-Hydraulic Tank10.6 gal (US) (40 B)
-Feature (3)Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
-Rod Diameter1.4 in (36 mm)
-Pump Capacity at 2,200 rpm35 gal/min (132 l/min)
-Operating Weight - Minimum15207 lb (6898 null)
-Operating Weight - Maximum - ROPS Capacity24251 lb (11000 null)
-MP Bucket (0.96 m3/1.25 yd3) - No Forks or Teeth1642 lb (745 null)
-System Pressure - Backhoe3336 psi (23000 kPa)
-System Pressure - Loader3336 psi (23000 kPa)
-Power Shuttle Transmission - Forward 2nd5.5 mile/h (8.9 km/h)
-Power Shuttle Transmission - Forward 1st3.4 mile/h (5.4 km/h)
-TypeClosed Center
-Extendible Stick659 lb (299 null)
-Rated Net Power - 2,200 rpm - SAE J134968 mm H2O (51 kg/mm)
-Net Peak Power - 1,800 rpm - EEC 80/126973 mm H2O (56 kg/mm)
-Gross Power - SAE J199574 mm H2O (55 kg/mm)
-Gross Power - ISO 1439674 mm H2O (55 kg/mm)
-Engine ModelCat® C3.4B
-Net Peak Power - 1,800 rpm - ISO 924973 mm H2O (55 kg/mm)
-Net Peak Power - 1,800 rpm - SAE J134972 mm H2O (55 kg/mm)
-Rated Net Power - 2,200 rpm - ISO 924968 mm H2O (51 kg/mm)
-Rated Net Power - 2,200 rpm - EEC 80/126969 mm H2O (51 kg/mm)
-Net Torque Rise - 1,400 rpm - SAE J134988 % (88 %)
-Front Axle (4WD) - Dynamic20233 lb (9186 null)
-Power Shuttle Transmission - Forward 3rd12 mile/h (20 km/h)
-Bore2.6 in (65 mm)
-Transmission - Power Shuttle - 4WD4 gal (US) (15 B)
-Transmission - Power Shuttle - 2WD4 gal (US) (15 B)
-Rear Axle - Planetaries0.4 gal (US) (1.7 B)
-Power SteeringHydrostatic
-Stroke4.7 in (120 mm)
-Front Axle (2WD) - Static50582 lb (22964 null)
-Front Axle (2WD) - Dynamic20233 lb (9186 null)
-TypeFront Wheel
-Power Shuttle Transmission - Forward 4th23 mile/h (36 km/h)
-Rear Axle4.4 gal (US) (16.5 B)
-Power Shuttle Transmission - Reverse 4th23 mile/h (36 km/h)
-Power Shuttle Transmission - Reverse 3rd12 mile/h (20 km/h)
-Power Shuttle Transmission - Reverse 2nd5.5 mile/h (8.9 km/h)
-Power Shuttle Transmission - Reverse 1st3.4 mile/h (5.4 km/h)
-Hydraulic System23.8 gal (US) (90 B)
-Cooling System with Air Conditioning5.8 gal (US) (22 B)
-Fuel Tank42 gal (US) (160 B)
-Engine Oil - With Filter2.3 gal (US) (8.8 B)
-Front Axle (4WD) - Planetaries0.2 gal (US) (0.7 B)
-Front Axle (4WD)2.9 gal (US) (11 B)
-BrakesSAE J/ISO 3450; ISO 3450 1996
-Exterior SoundSAE J188 JUN86 is 76 dB(A)

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

299C
$44,000
View More
262D
$32,000
View More
938M
$198,000
View More
988K
$650,000
View More