Net Power - SAE J134987 HP (65 kW)
Dig Depth - Standard14.3 ft (4348 mm)
Operating Weight - Maximum24251 lb (11000 kg)
Experience the new Cat 416F2 Backhoe Loader with features including spacious operator station, optional pilot controls, superior durability and outstanding performance. Safely operate on the job site with quieter hydraulics, increased visibility, and the ability to have four wheel braking engaged without wearing on tires or drive train.


-Net Power - SAE J134987 HP (65 kW)
-Dig Depth - Standard14.3 ft (4348 mm)
-Operating Weight - Maximum24251 lb (11000 kg)
-Cab - ROPS/FOPS359 lb (163 kg)
-Four Wheel Drive392 lb (178 kg)
-Air Conditioning101 lb (46 kg)
-Counterweights - Option 1255 lb (115 kg)
-Counterweights - Option 2530 lb (240 kg)
-Counterweights - Option 31015 lb (460 kg)
-Bore4.13 in (105 mm)
-Stroke5 in (127 mm)
-Displacement268 in³ (4.4 B)
-Pump TypeVariable Flow, Axial Piston
-Feature (13)Standard glow plug starting aid system for efficient cold weather starting.
-Feature (14)High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
-Feature (15)Higher low end torque for better engine/machine performance.
-Feature (4)Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
-Feature (3)Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
-Feature (2)Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
-Feature (16)Engine is equipped with electric fuel priming pump.
-Feature (12)Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
-Feature (1)Regeneration is passive and does not require any input from the operator or disrupt work.
-Rated Net Power - ISO 924988 HP (66 kW)
-Feature (5)Parking brake is mechanically applied through an adjustable hand lever located on the right console.
-Feature (4)Parking/secondary brakes are independent of the service brake system.
-Feature (3)Foot operated brake pedals can be interlocked for roading.
-Rated Net Power - SAE J134987 HP (65 kW)
-Feature (5)For durability, inlet valves are nitrided, martensitic chrome silicon steel.
-Feature (10)Direct injection fuel system provides accurate fuel delivery and efficiency.
-Feature (2)Self-adjusting, completely enclosed and sealed.
-Dig Depth - E-Stick Extended17.9 ft (5441 mm)
-Feature (1)Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
-Feature (11)Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
-Note (1)Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
-Turning Circle - 2WD/AWD (inner wheel not braked) - Outside Widest Loader Bucket36 ft (10.97 m)
-Turning Circle - 2WD/AWD (inner wheel not braked) - Outside Front Wheels26.8 ft (8.18 m)
-Stroke4.7 in (120 mm)
-Rod Diameter1.4 in (36 mm)
-TypeFront Wheel
-Choice 1Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
-Choice 4Front: 340/80R18; Rear: 19.5L-24 (12 ply) R4 ATU
-Choice 3Front: 12.5/80-18 NHS (12 ply) 1-3; Rear: 21L-24 (16 ply) R4 ATU
-Choice 2Front: 12.5/80-18 (12 ply) 1-3; Rear: 19.5L-24 (12 ply) ATU
-Power SteeringHydrostatic
-Bore2.6 in (65 mm)
-Hydraulic Tank10.6 gal (US) (40 B)
-Feature (9)Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
-Feature (8)Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
-Feature (7)Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
-Note (2)* Must meet the requirements outlined in ISO 22241.
-Cab - FOPSSAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
-Axle Oscillation11°
-Cab - SoundANSI/SAE J1166 OCT98 is 79 dB(A)
-Cab - ROPSSAE J1040 MAY94; ISO 3741 1994
-Feature (6)For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
-Front Axle (2WD) - Dynamic20233 lb (9186 kg)
-Net Peak Torque - 1,400 rpm323 ft-lb (438 N·m)
-Operating Weight - Minimum15904 lb (7214 kg)
-Operating Weight - Maximum - ROPS Capacity24251 lb (11000 kg)
-MP Bucket (0.96 m3/1.25 yd3) - No Forks or Teeth1642 lb (745 kg)
-NoteEngine meets U.S. EPA Tier 4 Final emission standards.
-Pump Capacity at 2,200 rpm35 gal/min (132 l/min)
-Power Shuttle Transmission - Forward 1st3.4 mile/h (5.4 km/h)
-TypeClosed Center
-System Pressure - Loader3336 psi (23000 kPa)
-System Pressure - Backhoe3336 psi (23000 kPa)
-Extendible Stick659 lb (299 kg)
-Rated Net Power - 2,200 rpm - SAE J134987 HP (65 kW)
-Net Peak Power - 1,800 rpm - EEC 80/1269107 HP (80 kW)
-Gross Power - SAE J199595 HP (71 kW)
-Gross Power - ISO 1439694 HP (70 kW)
-Engine ModelCat® C4.4 ACERT™
-Net Peak Power - 1,800 rpm - ISO 9249107 HP (80 kW)
-Net Peak Power - 1,800 rpm - SAE J1349106 HP (79 kW)
-Rated Net Power - 2,200 rpm - ISO 924988 HP (66 kW)
-Rated Net Power - 2,200 rpm - EEC 80/126988 HP (66 kW)
-Net Torque Rise - 1,400 rpm - SAE J134956%
-Rear Axle - Static50582 lb (22964 kg)
-Power Shuttle Transmission - Forward 2nd5.5 mile/h (8.9 km/h)
-Transmission - Power Shuttle - 2WD4 gal (US) (15 B)
-Rear Axle - Planetaries0.4 gal (US) (1.7 B)
-Rear Axle4.4 gal (US) (16.5 B)
-Hydraulic System23.8 gal (US) (90 B)
-Transmission - Power Shuttle - 4WD4 gal (US) (15 B)
-Front Axle (2WD) - Static50582 lb (22964 kg)
-Rear Axle - Dynamic20233 lb (9186 kg)
-Front Axle (4WD) - Static50582 lb (22964 kg)
-Front Axle (4WD) - Dynamic20233 lb (9186 kg)
-Power Shuttle Transmission - Forward 3rd12 mile/h (20 km/h)
-Fuel Tank42 gal (US) (160 B)
-Power Shuttle Transmission - Reverse 3rd12 mile/h (20 km/h)
-Power Shuttle Transmission - Reverse 2nd5.5 mile/h (8.9 km/h)
-Power Shuttle Transmission - Reverse 1st3.4 mile/h (5.4 km/h)
-Power Shuttle Transmission - Forward 4th23 mile/h (36 km/h)
-Front Axle (4WD) - Planetaries0.2 gal (US) (0.7 B)
-Power Shuttle Transmission - Reverse 4th23 mile/h (36 km/h)
-Front Axle (4WD)2.9 gal (US) (11 B)
-Cooling System with Air Conditioning5.8 gal (US) (22 B)
-Engine Oil - With Filter2.3 gal (US) (8.8 B)
-Diesel Exhaust Fluid (DEF)*5 gal (US) (19 B)
-BrakesSAE J/ISO 3450; ISO 3450 1996
-Exterior SoundSAE J188 JUN86 is 76 dB(A)

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

View More
View More
View More
View More