Ramp In, Ramp Out & Jump Hold on Cat Mills Ramp In, Ramp Out & Jump Hold on Cat Mills
PM620 Cold Planer Customer Testimonial - Dallas County, Texas PM620 Cold Planer Customer Testimonial - Dallas County, Texas

SPECS SUMMARY

Operating Width9.15 ft (2.79 m)
Maximum Truck Clearance15.95 ft (4.86 m)
Maximum Milling Depth13 in (330 mm)
Milling Width88 in (2235 mm)
The PM622 is a high-production, highly maneuverable half-lane milling machine that perform controlled full-depth removal of asphalt and concrete pavements in a single pass.


Specifications

Operating Width9.15 ft (2.79 m)
Maximum Truck Clearance15.95 ft (4.86 m)
Maximum Milling Depth13 in (330 mm)
Milling Width88 in (2235 mm)
Number of Bits193
Rotor Speeds100 / 109 / 118 rpm
Conveyor Swing60 degrees from center
Height - Canopy13.29 ft (4.05 m)
Minimum Left Cutting Radius6.56 ft (2 m)
Minimum Right Cutting Radius5.91 ft (1.8 m)
Operating Length - Conveyor Up47.62 ft (14.52 m)
Transport Height9.84 ft (3 m)
Transport Length40.79 ft (12.43 m)
Transport Width8.83 ft (2.7 m)
EngineCat C18 ACERT
Global EmissionsTier 4 Final / Stage IV
Maximum Milling Speed328 ft/min (100 m/min)
Maximum Travel Speed3.7 mile/h (5.9 km/h)
Rated Power630 HP (470 kW)
Cooling System22.1 gal (US) (85 l)
Diesel Exhaust Fluid (DEF) Tank12.2 gal (US) (47 l)
Engine Oil16.9 gal (US) (65 l)
Fuel Tank288.1 gal (US) (1108 l)
Hydraulic Tank29.4 gal (US) (113 l)
Water Spray System Tank898 gal (US) (3400 l)
Operating Weight74580 lb (33900 kg)
Transport Weight66140 lb (30000 kg)