SPECS SUMMARY

Engine ModelCat C3.3B DIT (turbo)
Net Power73.2 HP (54.6 kW)
Gross Power74.3 HP (55.4 kW)
The Cat 259D Compact Track Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard, suspended undercarriage system provides superior traction, flotation, stability and speed to work in a wide range of applications and underfoot conditions.


Specifications

-Engine ModelCat C3.3B DIT (turbo)
-Net Power73.2 HP (54.6 kW)
-Gross Power74.3 HP (55.4 kW)
-Gross Power - SAE J199574.3 HP (55.4 kW)
-Net Power - SAE 134973.2 HP (54.6 kW)
-Displacement203 in³ (3.3 l)
-Bore3.7 in (94 mm)
-Stroke4.7 in (120 mm)
-Operating Weight8945 lb (4057 kg)
-Tipping Load5800 lb (2631 kg)
-Breakout Force - Tilt Cylinder5035 lb (2284 kg)
-Length - Track on Ground59 in (1499 mm)
-Overall Length - Track78.7 in (1999 mm)
-Height - Top of Cab83.1 in (2111 mm)
-Ground Clearance8.9 in (226 mm)
-Departure Angle35°
-Maximum Dump Angle52°
-ROPSISO 3471:2008
-FOPSISO 3449:2005 Level I
-FOPS Level IIISO 3449:2005 Level II
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
-Hydraulic Tank10.3 gal (US) (39 l)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
-Vehicle Width (400 mm/15.7 in tracks)69 in (1755 mm)
-Travel Speed - Forward or Reverse - Two Speed8.5 mile/h (13.7 km/h)
-Net Power - ISO 924973.9 HP (55.1 kW)
-Cooling System3.7 gal (US) (14 l)
-Engine Crankcase3 gal (US) (11 l)
-Fuel Tank27.7 gal (US) (105 l)
-Hydraulic System13.2 gal (US) (50 l)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
-Rated Operating Capacity with Optional Counterweight3100 lb (1406 kg)
-Travel Speed - Forward or Reverse - One Speed5.9 mile/h (9.5 km/h)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
-Operating Weight - 320 mm/12.6 in Tracks8846 lb (4013 kg)
-Operating Weight - 400 mm/15.7 in Tracks8945 lb (4057 kg)
-Ground Pressure - With 400 mm/15.7 in Track4.8 psi (33.4 kPa)
-Ground Contact Area - With 400 mm/15.7 in Track1848 in² (1.19 m²)
-Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-Inside Cab**83 dB(A) (83 dB(A))
-Note (2)**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
-Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-Outside Cab***103 dB(A) (103 dB(A))
-Peak Torque - 1,500 rpm - SAE J1995195 ft·lbf (265 N·m)
-Turning Radius from Center - Machine Rear61.5 in (1561 mm)
-Bucket Pin Reach - Maximum Lift9.4 in (238 mm)
-Clearance at Maximum Lift and Dump89.9 in (2283 mm)
-Length - With Bucket on Ground137.3 in (3486 mm)
-Length - Without Bucket108.9 in (2767 mm)
-Bucket Pin Height - Maximum Lift121 in (3075 mm)
-Bucket Pin Height - Carry Position7.8 in (198 mm)
-Ground Contact Area - With 320 mm/12.6 in Track1483 in² (0.96 m²)
-Ground Pressure - With 320 mm/12.6 in Track6 psi (41.1 kPa)
-Rated Operating Capacities - 35% Tipping Load2030 lb (921 kg)
-Rated Operating Capacities - 50% Tipping Load2900 lb (1315 kg)
-Maximum Overall Height154.1 in (3915 mm)
-Maximum Reach - With Arms Parallel to Ground51.4 in (1305 mm)
-Hydraulic Flow - High Flow - Loader Hydraulic Flow30 gal/min (112 l/min)
-Hydraulic Flow - High Flow - Loader Hydraulic Pressure3335 psi (23000 kPa)
-Hydraulic Flow - Standard - Hydraulic Power (Calculated)39 HP (29 kW)
-Hydraulic Flow - Standard - Loader Hydraulic Flow20 gal/min (76 l/min)
-Hydraulic Flow - High Flow - Hydraulic Power (Calculated)58 HP (43 kW)
-Vehicle Width (320 mm/12.6 in tracks)66 in (1676 mm)
-Rack Back Angle - Maximum Height87°
-Reach - Maximum Lift/Dump23.9 in (608 mm)
-Turning Radius from Center - Bucket86 in (2184 mm)
-Turning Radius from Center - Coupler54.8 in (1392 mm)
-Hydraulic Flow - Standard - Loader Hydraulic Pressure3335 psi (23000 kPa)

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER
  • MANDATORY EQUIPMENT

Optional Equipment

  • OPTIONAL EQUIPMENT

Featured Used Equipment

420FST
$58,500
View More
140HNA
$75,000
View More
930M
$160,000
View More
950K
$225,000
View More
938M
$198,000
View More