SPECS SUMMARY

Engine ModelCat C3.3B DIT (turbo)
Net Power72.9 HP (54.4 kW)
Rated Operating Capacities - 50% Tipping Load4000 lb (1814 kg)
The Cat 287D Multi Terrain Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard, suspended undercarriage system provides superior traction, flotation, speed and ride quality with very low ground pressure and minimal ground disturbance across a wide range of underfoot conditions.


Specifications

-Engine ModelCat C3.3B DIT (turbo)
-Net Power72.9 HP (54.4 kW)
-Rated Operating Capacities - 50% Tipping Load4000 lb (1814 kg)
-Rated Operating Capacities - 35% Tipping Load2800 lb (1270 kg)
-Gross Power74.3 HP (55.4 kW)
-Gross Power - SAE J199574.3 HP (55.4 kW)
-Net Power - SAE 134972.9 HP (54.4 kW)
-Displacement203 in³ (3.3 l)
-Bore3.7 in (94 mm)
-Stroke4.7 in (120 mm)
-Operating Weight9929 lb (4504 kg)
-Ground Contact Area2561 in² (1.65 m²)
-Ground Pressure3.9 psi (26.7 kPa)
-Tipping Load8000 lb (3629 kg)
-Breakout Force - Tilt Cylinder7291 lb (3307 kg)
-Cooling System3.7 gal (US) (14 l)
-Engine Crankcase3 gal (US) (11 l)
-Fuel Tank24.8 gal (US) (94 l)
-Hydraulic System13.7 gal (US) (52 l)
-Hydraulic Tank10.3 gal (US) (39 l)
-Length - Track on Ground71.1 in (1807 mm)
-Overall Length - Track90 in (2285 mm)
-Height - Top of Cab83.2 in (2113 mm)
-Vehicle Width78 in (1981 mm)
-Ground Clearance8.9 in (226 mm)
-Departure Angle38°
-Maximum Dump Angle51°
-ROPSISO 3471:2008
-FOPSISO 3449:2005 Level I
-FOPS Level IIISO 3449:2005 Level II
-Rated Operating Capacity with Optional Counterweight4250 lb (1927 kg)
-Travel Speed - Forward or Reverse - Two Speed8 mile/h (12.9 km/h)
-Travel Speed - Forward or Reverse - One Speed5.2 mile/h (8.3 km/h)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
-Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-Note (2)**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
-Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-Inside Cab**81 dB(A) (81 dB(A))
-Peak Torque - 1,500 rpm - SAE J1995195 ft·lbf (265 N·m)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
-Outside Cab***103 dB(A) (103 dB(A))
-Maximum Reach - With Arms Parallel to Ground50.9 in (1292 mm)
-Length - With Bucket on Ground146.2 in (3714 mm)
-Length - Without Bucket117.9 in (2995 mm)
-Maximum Overall Height158.1 in (4015 mm)
-Clearance at Maximum Lift and Dump94 in (2387 mm)
-Bucket Pin Reach - Maximum Lift15.4 in (391 mm)
-Net Power - ISO 924973.7 HP (54.9 kW)
-Bucket Pin Height - Carry Position7.5 in (190 mm)
-Bucket Pin Height - Maximum Lift125.1 in (3178 mm)
-Rack Back Angle - Maximum Height84°
-Reach - Maximum Lift/Dump30.8 in (783 mm)
-Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure4061 psi (28000 kPa)
-Hydraulic Flow - Standard - Hydraulic Power (Calculated)44 HP (33 kW)
-Hydraulic Flow - Standard - Loader Hydraulic Flow23 gal/min (86 l/min)
-Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32 gal/min (121 l/min)
-Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76 HP (57 kW)
-Turning Radius from Center - Bucket92 in (2337 mm)
-Turning Radius from Center - Coupler58.8 in (1494 mm)
-Turning Radius from Center - Machine Rear67.4 in (1712 mm)
-Hydraulic Flow - Standard - Loader Hydraulic Pressure3335 psi (23000 kPa)

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER
  • MANDATORY EQUIPMENT

Optional Equipment

  • OPTIONAL EQUIPMENT

Featured Used Equipment

140M2
$265,000
View More
950K
$225,000
View More
938M
$180,000
View More
930K
$125,000
View More
305E2CR
$55,000
View More