SPECS SUMMARY

Engine ModelCat C3.8 DIT (turbo)
Net Power95 HP (71 kW)
Rated Operating Capacities - 50% Tipping Load4700 lb (2132 kg)
The Cat® 297D2 Multi Terrain Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard, suspended undercarriage system provides superior traction, flotation, speed and ride quality with very low ground pressure and minimal ground disturbance across a wide range of underfoot conditions.


Specifications

-Engine ModelCat C3.8 DIT (turbo)
-Net Power95 HP (71 kW)
-Rated Operating Capacities - 50% Tipping Load4700 lb (2132 kg)
-Gross Power - SAE J199598 HP (73 kW)
-Net Power - SAE 134995 HP (71 kW)
-Displacement232 in³ (3.8 l)
-Bore3.9 in (100 mm)
-Stroke4.7 in (120 mm)
-Operating Weight10692 lb (4850 kg)
-Ground Contact Area2561 in² (1.65 m²)
-Ground Pressure4.2 psi (28.8 kPa)
-Tipping Load9400 lb (4264 kg)
-Breakout Force - Tilt Cylinder7468 lb (3387 kg)
-Breakout Force - Lift Cylinder6072 lb (2754 kg)
-Cooling System4.1 gal (US) (16 l)
-Engine Crankcase3.5 gal (US) (13 l)
-Fuel Tank32.2 gal (US) (122 l)
-Hydraulic System14.5 gal (US) (55 l)
-Hydraulic Tank10.3 gal (US) (39 l)
-Length - Track on Ground71.1 in (1807 mm)
-Overall Length - Track90 in (2286 mm)
-Height - Top of Cab83.2 in (2114 mm)
-Vehicle Width78.1 in (1984 mm)
-Ground Clearance8.8 in (223 mm)
-Departure Angle30°
-Maximum Dump Angle52°
-ROPSISO 3471:2008
-FOPSISO 3449:2005 Level I
-FOPS Level IIISO 3449:2005 Level II
-Rated Operating Capacity with Optional Counterweight4960 lb (2250 kg)
-Diesel Exhaust Fluid (DEF) Tank5 gal (US) (19 l)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 880 CCA battery, 1981 mm (78 in) dirt bucket, standard flow hydraulics, no optional counterweights and manual quick coupler (unless otherwise noted).
-Travel Speed - Forward or Reverse - One Speed5.9 mile/h (9.6 km/h)
-Inside Cab*83 dB(A) (83 dB(A))
-Travel Speed - Forward or Reverse - Two Speed9.4 mile/h (15.1 km/h)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 880 CCA battery, 1981 mm (78 in) dirt bucket, standard flow hydraulics, no optional counterweights and manual quick coupler (unless otherwise noted).
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 880 CCA battery, 1981 mm (78 in) dirt bucket, standard flow hydraulics, no optional counterweights and manual quick coupler (unless otherwise noted).
-Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-Outside Cab**104 dB(A) (104 dB(A))
-Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
-Roll Back Angle27°
-Reach - Maximum Lift/Dump30.5 in (776 mm)
-Bucket Pin Reach - Maximum Lift15.2 in (387 mm)
-Clearance at Maximum Lift and Dump96.3 in (2445 mm)
-Length - With Bucket on Ground155.2 in (3942 mm)
-Length - Without Bucket126 in (3201 mm)
-Bucket Pin Height - Maximum Lift127.6 in (3241 mm)
-Bucket Pin Height - Carry Position7.9 in (200 mm)
-Net Power - ISO 924995 HP (71 kW)
-Peak Torque - 1,500 rpm - SAE J1995246 ft·lbf (334 N·m)
-Rated Operating Capacities - 35% Tipping Load3290 lb (1492 kg)
-Maximum Overall Height160.5 in (4076 mm)
-Maximum Reach - With Arms Parallel to Ground49.6 in (1260 mm)
-Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32 gal/min (121 l/min)
-Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure4061 psi (28000 kPa)
-Hydraulic Flow - Standard - Hydraulic Power (Calculated)44 HP (33 kW)
-Hydraulic Flow - Standard - Loader Hydraulic Flow23 gal/min (86 l/min)
-Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76 HP (57 kW)
-Turning Radius from Center - Machine Rear73.4 in (1864 mm)
-Rack Back Angle - Maximum Height83°
-Turning Radius from Center - Bucket (racked)91.8 in (2333 mm)
-Turning Radius from Center - Coupler59.2 in (1504 mm)
-Hydraulic Flow - Standard - Loader Hydraulic Pressure3335 psi (23000 kPa)

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER
  • MANDATORY EQUIPMENT

Optional Equipment

  • OPTIONAL EQUIPMENT

Featured Used Equipment

140M
$190,000
View More
545D
$310,000
View More
262D
$39,000
View More
930M
$150,000
View More