Simplified 8 Button Control Panel Simplified 8 Button Control Panel
Pass Count and Temperature Mapping Pass Count and Temperature Mapping

SPECS SUMMARY

Standard Operating Weight with ROPS22950 lb (10410 kg)
Maximum Operating Weight with Cab26610 lb (12070 kg)
Standard Operating Weight with Cab23525 lb (10670 kg)
Maximum Operating Weight with ROPS25995 lb (11970 kg)
The Cat® CB10 Split Drum is a 10 ton roller with 1700 mm (67") tandem vibratory drums. It excels on a variety of asphalt mix designs as well as other granular materials. It features exceptional visibility and control, smooth operating powertrain, and versatile vibratory systems including Auto-Adjustable Compaction and 2-Amplitude, 2 frequency.


Specifications

Standard Operating Weight with ROPS22950 lb (10410 kg)
Maximum Operating Weight with Cab26610 lb (12070 kg)
Standard Operating Weight with Cab23525 lb (10670 kg)
Maximum Operating Weight with ROPS25995 lb (11970 kg)
Standard Compaction Width67 in (1700 mm)
Maximum Compaction Width73 in (1940 mm)
Static Linear Load176 lb/in (31.5 kg/cm)
Travel Speed - Maximum7.5 mile/h (12 km/h)
Gross Power131 HP (98 kW)
Engine ModelCat C4.4 with ACERT Technology
Overall Length177 in (4565 mm)
Wheel Base130 in (3300 mm)
Height - With ROPS/FOPS117 in (2982 mm)
Overall Width73 in (1872 mm)
Drum Diameter47 in (1198 mm)
Drum Width67 in (1700 mm)
Vibration SelectionIndependent per drum, front only, rear only, both
Nominal Amplitude - High0.024 in (0.61 mm)
Centrifugal Force per Drum - Minimum16973 lb (75.5 kN)
Nominal Amplitude - Low0.013 in (0.33 mm)
Centrifugal Force per Drum - Maximum19491 lb (86.7 kN)
Fuel Tank Capacity55 gal (US) (208 l)
Water Spray Tank Capacity221 gal (US) (837 l)
Operating Weight22950 lb (10410 kg)

Benefits and Features

Comfortable Operating Station

The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle, wide-width seat belt, cup holders and a lockable storage compartment.

Fingertip Control

The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.

LCD Display

The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in the same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.

Convenient Console

The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.

Auto Adjustable Compaction

AAC optimizes compaction effort based on the response received from the asphalt and sub-base layers. Each drum is equipped with a dedicated accelerometer and ECM that delivers quick calculations to help determine the ideal amplitude to maximize compaction performance. The system has a fast, 4 second response time from the minimum to maximum amplitude that helps ensure even compaction.

Two Amplitude and Two Frequency Vibratory System

The two amplitude and two frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.

Performance Features

The vibratory systems offer multiple options that help fine-tune performance on thick challenging lifts. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.

Temperature Sensors

Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

Pass-Count Mapping

Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

Temperature Mapping

Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

Machine to Machine Communication

Machine to Machine Communication improves worksite efficiency by allowing operators to monitor fleet patterns. The system allows operators to monitor rolling patterns of other machine and pickup where they left off. It also simplifies night-time operation when lighting conditions make it difficult to see after the first pass.

Cat C4.4 Engine

The C4.4 engine provides 98 kW (131 hp) of power and meets emissions equivalent to U.S. EPA Tier 4 Interim and EU Stage IIIB emission requirements. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service.

High Capacity Cooling System

The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. The high capacity fan directs warm air away from the operator for a more comfortable operating environment.