CD10 Split Drum
Simplified 8 Button Control Panel
Pass Count and Temperature MappingSPECS SUMMARY
| Operating Weight | 22311 lb (10120 kg) |
| Standard Compaction Width | 67 in (1700 mm) |
| Gross Power | 101.9 HP (75 kW) |
| Fuel Tank Capacity | 50 gal (US) (191 l) |
Specifications
| Operating Weight | 22311 lb (10120 kg) |
| Standard Compaction Width | 67 in (1700 mm) |
| Gross Power | 101.9 HP (75 kW) |
| Fuel Tank Capacity | 50 gal (US) (191 l) |
| Drum Width | 67 in (1700 mm) |
| Overall Length | 14.1 ft (4322 mm) |
| Wheel Base | 10.2 ft (3120 mm) |
| Height - With ROPS/FOPS | 9.6 ft (2990 mm) |
| Overall Width | 74 in (1874 mm) |
| Maximum Operating Weight with ROPS | 24625 lb (11170 kg) |
| Drum Diameter | 44 in (1202 mm) |
| Water Spray Tank Capacity | 198 gal (US) (750 l) |
| Standard Operating Weight with ROPS | 21738 lb (9860 kg) |
| Minimum Amplitude | 0.007 in (0.18 mm) |
| Centrifugal Force per Drum - Minimum | 6092 lb (27.1 kN) |
| Maximum Operating Weight with Cab | 25220 lb (11440 kg) |
| Centrifugal Force per Drum - Maximum | 28977 lb (128.9 kN) |
| Nominal Amplitude - High | 0.033 in (0.84 mm) |
| Standard Operating Weight with Cab | 22311 lb (10120 kg) |
| Engine Model | Cat C3.4B with ACERT Technology |
| Maximum Compaction Width | 118 in (3020 mm) |
| Drum Offset | 51 in (1320 mm) |
| Travel Speed - Maximum | 7.5 mile/h (12 km/h) |
| Static Linear Load | 165 lb/in (29.5 kg/cm) |
| Vibration Selection | Independent per Drum, front only, rear only, both |
Benefits and Features
Comfortable Operating Environment
The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle that supports communication devices, wide-width seat belt, cup holders and a lockable storage compartment.
Fingertip Control
The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.
LCD Display
The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.
Convenient Console
The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.
Auto-Adjustable Compaction System
Auto-adjustable compaction delivers faster compaction, increased productivity, and simple operation at a lower cost. Each drum is controlled independently and activation is as simple as the push of a button.
2 Amplitude, 2 frequency Vibratory System
The 2-amplitude and 2-frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.
Performance Features
The vibratory systems offer multiple options that help fine-tune performance on thick challenging lifts. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.
Temperature Sensors
Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.
Pass-Count Mapping
Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.
Temperature Mapping
Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.
Machine to Machine Communication
Machine to Machine Communication improves worksite efficiency by allowing operators to monitor fleet patterns. The system allows operators to monitor rolling patterns of other machine and pickup where they left off. It also simplifies night-time operation when lighting conditions make it difficult to see after the first pass.
Cat C3.4B Engine
The C3.4B engine provides 75 kW (101.9 hp) of power and meets emissions equivalent to U.S. EPA Tier 4 Interim and EU Stage IIIB. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service (a Cat exclusive).
High Capacity Cooling System
The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. The system directs warm air away from the operator for a more comfortable operating environment.