SPECS SUMMARY

Engine ModelCat® C32 ACERT™
Flywheel Power850 mm H2O (634 kg/mm)
Operating Weight229800 lb (104236 null)
Cat® large dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. By optimizing performance and simplifying serviceability with our modular design, our machines move more material efficiently and safely at a lower cost per ton. These models include safety enhancements, improved operator comfort, and productivity increasing electronic features to keep your business strong for generations to come.


Specifications

-Engine ModelCat® C32 ACERT™
-Flywheel Power850 mm H2O (634 kg/mm)
-Operating Weight229800 lb (104236 null)
-Shipping Weight82640 lb (37485 null)
-Shoe TypeExtreme Service
-Width - Shoe28 in (710 mm)
-Shoes/Side41
-Grouser Height4 in (102 mm)
-Pitch12.5 in (318 mm)
-Track Gauge114 in (2896 mm)
-Length - Track on Ground175 in (4444 mm)
-Ground Contact Area9781 in² (6.3 m²)
-Track Rollers/Side8
-Number of Carrier Rollers1 per side (optional)
-Bore5.7 in (145 mm)
-Stroke6.4 in (162 mm)
-Displacement1959 in³ (32.1 l)
-1 Forward2.4 mile/h (3.9 km/h)
-2 Forward4.2 mile/h (6.8 km/h)
-3 Forward7.3 mile/h (11.8 km/h)
-1 Reverse2.9 mile/h (4.7 km/h)
-2 Reverse5.1 mile/h (8.2 km/h)
-3 Reverse8.7 mile/h (14 km/h)
-TypePlanetary powershift
-Fuel Tank425 gal (US) (1609 l)
-Cooling System71.1 gal (US) (269 l)
-Engine Crankcase*27.2 gal (US) (103 l)
-Power Train90.9 gal (US) (344 l)
-Final Drive - Each12.4 gal (US) (47 l)
-Roller Frames - Each24.8 gal (US) (94 l)
-Pivot Shaft Compartment18.8 gal (US) (71 l)
-Implement Hydraulic System - Tank Only58.9 gal (US) (223 l)
-Length - With Single-Shank Ripper319.2 in (8107 mm)
-Height - ROPS/Canopy*185.9 in (4723 mm)
-Width - Over Trunnions172.4 in (4379 mm)
-Width - Without Trunnions - Standard Shoe148.9 in (3782 mm)
-Track Gauge114 in (2896 mm)
-Overall Length - SU-Blade/SS Ripper414.4 in (10525 mm)
-Note (2)D11T shown equipped with 710 mm (28 in) shoes.
-Overall Length - Basic Tractor242.5 in (6160 mm)
-Drawbar Height (Center of Clevis)*37.1 in (942 mm)
-Ground Clearance*31.4 in (798 mm)
-Length - Track on Ground175 in (4444 mm)
-Length - With Multi-Shank Ripper331.8 in (8427 mm)
-Length - Basic Tractor - With Drawbar242.5 in (6160 mm)
-Height - Top of Stack*179.1 in (4549 mm)
-Height - FOPS Cab*173.4 in (4405 mm)
-Length - With SU-Blade**345.1 in (8765 mm)
-Note (2)Sleeve Bearing Track with Positive Pin Retention.
-Note (1)Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi).
-Note (2)Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
-Note (4)No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft).
-Note (3)Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-Note (2)Engine ratings apply at 1,800 rpm.
-Note (3)Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
-Fuel Tank - Platform Ready470 gal (US) (1778 l)
-Note (1)* Includes grouser height for total dimensions on hard surface.
-Sound (2)The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).
-Sound (1)The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with th
-Note* With oil filters.
-Note (1)* Excludes all fan losses.
-Width - Without Trunnions - Standard Shoe149.8 in (3806 mm)
-Note (4)D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
-Note (3)D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator.
-Note (1)D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
-Note (3)D11T shown equipped with 710 mm (28 in) shoes.
-Note (2)**CD Blade on D11T CD.
-Note (2)D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
-Note (1)*Includes grouser height for total dimensions on hard surfaces.
-Width - Over Trunnions172.4 in (4379 mm)
-Track Gauge114 in (2896 mm)
-Overall Length - SU-Blade/SS Ripper**421.7 in (10712 mm)
-Overall Length - Basic Tractor242.5 in (6160 mm)
-Note (1)*Includes grouser height for total dimensions on hard surfaces.
-Fuel Tank - High Capacity505 gal (US) (1911 l)
-D11T - Tilt Cylinder Relief Valve Setting3525 psi (24300 kPa)
-D11T - Ripper (Pitch) Relief Valve Setting3300 psi (22750 kPa)
-D11T - Ripper (Lift) Relief Valve Setting3300 psi (22750 kPa)
-D11T - Pump TypeGear-type pump
-D11T - Tilt Pump Flow41 gal/min (155 l/min)
-D11T CD - Carrydozer Relief Valve Setting3500 psi (24135 kPa)
-D11T CD - Ripper (Lift) Relief Valve Setting3500 psi (24135 kPa)
-D11T CD - Pump TypeGear-type pump
-D11T CD - Pump Output - Implement177 gal/min (670 l/min)
-D11T - Combined Pump Output - Implement164 gal/min (620 l/min)
-D11T - Bulldozer Relief Valve Setting3300 psi (22750 kPa)
-Engine Power - ISO 14396908 mm H2O (677 kg/mm)
-Engine Power - Gross SAE J1995*913 mm H2O (681 kg/mm)
-EmissionsU.S. EPA Tier 4 Final
-Engine Power - Net SAE J1349/ISO 9249850 mm H2O (634 kg/mm)
-Net SAE J1349/ISO 9249850 mm H2O (634 kg/mm)
-Transmission Clutch Diameter21 in (533 mm)
-Shipping Weight - CD83340 lb (37802 null)
-Operating Weight - CD248500 lb (112718 null)
-D11T CD - Ripper (Pitch) Relief Valve Setting3500 psi (24135 kPa)
-D11T CD - Tilt Cylinder Flow66 gal/min (250 l/min)
-Height - Top of Stack*179.1 in (4549 mm)
-Height - ROPS/Canopy*185.9 in (4723 mm)
-Height - FOPS Cab*173.4 in (4405 mm)
-Ground Clearance*31.4 in (798 mm)
-Length - Basic Tractor - With Drawbar242.5 in (6160 mm)
-Length - Track on Ground175 in (4444 mm)
-Length - With Single-Shank Ripper319.2 in (8107 mm)
-Length - With SU-Blade337.8 in (8579 mm)
-Length - With Multi-Shank Ripper331.8 in (8427 mm)
-Drawbar Height (Center of Clevis)*37.1 in (942 mm)
-ROPSRollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994.
-Width - Shoe - CD36 in (915 mm)
-Ground Contact Area - CD12605 in² (8.1 m²)
-Ground Clearance*30.6 in (777 mm)
-Length - With U-Blade340.2 in (8641 mm)
-Hydraulically Applied Multiple-disc Steering Clutch17.3 in (440 mm)
-FOPSFalling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
-Spring Applied Multiple-disc Brake24.1 in (612 mm)
-D11T CD - Tilt Cylinder Relief Valve Setting3600 psi (24825 kPa)
-Oscillation13.8 in (351 mm)

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • TECHNOLOGY
  • UNDERCARRIAGE
  • SAFETY AND SECURITY
  • OTHER STANDARD EQUIPMENT

Optional Equipment

  • GUARDS
  • OPERATOR STATION
  • POWER TRAIN
  • UNDERCARRIAGE
  • BULLDOZER ATTACHMENTS
  • REAR ATTACHMENTS
  • TECHNOLOGY
  • SAFETY AND SECURITY
  • OTHER ATTACHMENTS

Featured Used Equipment

420F2ST
$100,000
View More
262D
$39,000
View More
CS74
$110,000
View More
950K
$245,000
View More
308CCR
$39,000
View More