D4K2 Tier 4 Final/Stage IV

Cat® K2 Series Small Dozers Key Features Overview | D3K2, D4K2, D5K2 Cat® K2 Series Small Dozers Key Features Overview | D3K2, D4K2, D5K2
Slope Assist for the New Cat® K2 Dozers Slope Assist for the New Cat® K2 Dozers
Cat® GRADE with 3D Overview | D3K2, D4K2, D5K2 Small Dozers Cat® GRADE with 3D Overview | D3K2, D4K2, D5K2 Small Dozers
Cat® D3K2, D4K2, D5K2 Small Dozers | Grade Control Features Overview Cat® D3K2, D4K2, D5K2 Small Dozers | Grade Control Features Overview
Cat® K2 Series Small Dozers Overview | D3K2, D4K2, D5K2 Cat® K2 Series Small Dozers Overview | D3K2, D4K2, D5K2
Cat® Small Dozers At Work | D3K2, D4K2, D5K2 Cat® Small Dozers At Work | D3K2, D4K2, D5K2
Maintenance and Serviceability | Cat® D3K2, D4K2, D5K2 Small Dozers Maintenance and Serviceability | Cat® D3K2, D4K2, D5K2 Small Dozers

SPECS SUMMARY

Engine Model Cat C4.4 ACERT
Power - Net 92 HP (68.8 kW)
Displacement 269 in³ (4.4 l)
Bore 4.13 in (105 mm)
D4K2 Track-Type Tractor


Specifications

Engine Model Cat C4.4 ACERT
Power - Net 92 HP (68.8 kW)
Displacement 269 in³ (4.4 l)
Bore 4.13 in (105 mm)
Stroke 5 in (127 mm)
Note Engine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.
Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 92 HP (68.8 kW)
Rated Net Power - 2,200 rpm - SAE J1349 92 HP (68.8 kW)
Drive Pumps 1
Maximum Travel Speed - Forward 5.6 mile/h (9 km/h)
Maximum Travel Speed - Reverse 6.2 mile/h (10 km/h)
Relief Valve Settings 7033 psi (48500 kPa)
Track Motors 2
Operating Weight - XL 18007 lb (8168 kg)
Operating Weight - LGP 18686 lb (8476 kg)
Cooling System 5.92 gal (US) (22.4 l)
Crankcase - With Filter 2.91 gal (US) (11 l)
Final Drive - Each - LGP 2.6 gal (US) (10 l)
Final Drive - Each - XL 2.6 gal (US) (10 l)
Fuel Tank 51.5 gal (US) (195 l)
Transmission - Hydraulic Tank 15.7 gal (US) (59.5 l)
Pump Output 17.7 gal/min (68 l/min)
Relief Valve Settings 2988 psi (20600 kPa)
Ground Contact Area - LGP 4425 in² (28550 cm²)
Ground Contact Area - XL 3206 in² (20682 cm²)
Ground Pressure - LGP 4.2 psi (29.2 kPa)
Ground Pressure - XL 5.6 psi (38.6 kPa)
Length - Track on Ground - LGP 89 in (2248 mm)
Length - Track on Ground - XL 89 in (2248 mm)
Shoe Width - LGP 25 in (635 mm)
Shoe Width - XL 18 in (460 mm)
Track Gauge - LGP 68 in (1725 mm)
Track Gauge - XL 61 in (1550 mm)
Type Parallelogram
Number of Shanks 3
Height 6.5 in (165 mm)
Weight 1222 lb (554 kg)
Maximum Digging Depth 13.3 in (337.5 mm)
Maximum Ground Clearance Under Tip 17.6 in (448 mm)
Maximum Reach - Ground Line 23.5 in (596 mm)
Overall Width 67.3 in (1710 mm)
Weight 1345 lb (610 kg)
Winch Drive Hydrostatic
Control Hydraulic
Speed Variable
Drum Capacity - Optional Cable 256 ft (78 m)
Drum Capacity - Recommended Cable 371 ft (113 m)
Drum Diameter 10 in (254 mm)
Drum Width 10.8 in (274 mm)
Maximum Line Pull - Bare Drum 40000 lb (18144 kg)
Maximum Line Pull - Full Drum 25000 lb (11340 kg)
Maximum Line Speed - Bare Drum 131 ft/min (40 m/min)
Maximum Line Speed - Full Drum 207 ft/min (63 m/min)
Overall Width 29.2 in (741 mm)
Rope Diameter - Optional 0.75 in (19 mm)
Rope Diameter - Recommended 0.63 in (16 mm)
Throat Clearance 6.75 in (171.5 mm)
Winch Length 27.76 in (705 mm)
FOPS ISO 3449:2005 Level II
ROPS ISO 6396:2008
Sound Levels - ISO 6396:2008 79 dB(A) (79 dB(A))
Sound Levels - SAE J1166 FEB2008 79 dB(A) (79 dB(A))
BLADE: Blade Capacity (SAE) - Intermediate 1.96 yd³ (1.5 m³)
BLADE: Blade Capacity (SAE) - LGP 2.42 yd³ (1.85 m³)
BLADE: Blade Capacity (SAE) - XL 2.59 yd³ (1.98 m³)
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - XL 52° to 58°
BLADE: Blade Height - Intermediate 33.9 in (860 mm)
BLADE: Blade Height - LGP 35.8 in (910 mm)
BLADE: Blade Height - XL 39.8 in (1010 mm)
BLADE: Blade Lift Height - Intermediate 29.3 in (743 mm)
BLADE: Blade Lift Height - LGP 27.9 in (708 mm)
BLADE: Blade Lift Height - XL 29.3 in (743 mm)
BLADE: Blade Width - Intermediate 115 in (2921 mm)
BLADE: Blade Width - LGP 124 in (3149 mm)
BLADE: Blade Width - XL 109.5 in (2782 mm)
BLADE: Blade Width at Maximum Angle - Intermediate 105.1 in (2669 mm)
BLADE: Blade Width at Maximum Angle - LGP 113.1 in (2874 mm)
BLADE: Blade Width at Maximum Angle - XL 100.1 in (2542 mm)
BLADE: Digging Depth - Intermediate 23.2 in (590 mm)
BLADE: Digging Depth - LGP 23.2 in (590 mm)
BLADE: Digging Depth - XL 22.5 in (573 mm)
BLADE: Maximum Angle (either side) - Intermediate 25°
BLADE: Maximum Angle (either side) - LGP 25°
BLADE: Maximum Angle (either side) - XL 25°
BLADE: Maximum Tilt - Intermediate 17.6 in (448 mm)
BLADE: Maximum Tilt - LGP 17.2 in (438 mm)
BLADE: Maximum Tilt - XL 15.2 in (387 mm)
Ground Clearance - LGP 13 in (332 mm)
Ground Clearance - XL 13 in (332 mm)
Length - Basic Tractor - Without Blade - LGP 128.9 in (3275 mm)
Length - Basic Tractor - Without Blade - XL 128.9 in (3275 mm)
Overall Length - With Blade - LGP 168.3 in (4274 mm)
Overall Length - With Blade - XL 168.3 in (4274 mm)
Track Gauge - LGP 67.9 in (1725 mm)
Track Gauge - XL 61 in (1550 mm)
Tractor Height - LGP 108.8 in (2763 mm)
Tractor Height - XL 108.8 in (2763 mm)
Width - Tractor - Standard Shoes - No Blade - LGP 92.9 in (2360 mm)
Width - Tractor - Standard Shoes - No Blade - XL 79.1 in (2010 mm)
Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) (19 l)
Number of Rollers - Each Side 7
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
Number of Shoes - Each Side - SystemOne Undercarriage 38
Note Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.

Benefits and Features

New grade control feature provides you slope of blade in cross slope direction and mainfall (fore/aft) direction without having to estimate.

New optional grade control feature which helps you more easily achieve the desired blade mainfall and cross slope automatically.

New blade control feature helps you obtain a finish grade with less operator effort.

New traction control feature reduces track slip and undercarriage wear for lower operating costs.

New engine throttle settings reduce fuel consumption up to 25% to save you more money.

Experience a new level of comfort in all climates with the new optional heated and ventilated air suspension seat.

This option lets the operator easily adjust the blade pitch to optimize productivity.

Cat® C4.4 ACERT™ diesel engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.

Heated joysticks (optional) offer even greater comfort in cold climates.

Optional grade control system enables operators to cut and fill to grade with increased accuracy, minimizing the need for traditional stakes and grade checkers. Large AccuGrade monitor is built into the machine's dash for easy viewing during operation.

Choice of undercarriage to give you the lowest costs per hour. Select either the standard sealed and lubricated track (SALT) undercarriage or the innovative SystemOne™ undercarriage.

Standard Equipment

  • Alternator, 12 volt, 120 Amp, heavy duty brushless
  • ROPS/FOPS canopy
  • Hydraulics, 3 valve
  • Cat C4.4 ACERT diesel engine, turbocharged, Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
  • SALT Undercarriage
  • Cat Product Link™ PL631 Satellite/PL641 Cellular
  • Extended life coolant, –37° C (–35° F)

Optional Equipment

  • Integrated four front halogen lights, two rear halogen lights
  • Drive, auxiliary
  • Track Pairs, XL: – Track, 460 mm (18 in) MS SystemOne
  • Cab with air conditioning*
  • Hydraulics, 4 valve for use with ripper
  • Guard, rear, heavy duty
  • VPAT XL blade
  • Drawbar, towing
  • Control, ripper
  • Installation, AccuGrade ready, includes Cat Grade Control Slope Assist
  • Heater, engine, coolant, 120 volt
  • Machine Security System
  • Extended life coolant, –50° C (–58° F)
  • Winch, hydrostatic