SPECS SUMMARY

Engine ModelCat C9.3 ACERT™
Flywheel Power215 mm H2O (161 kg/mm)
Operating Weight47138 lb (21382 null)
The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.


Specifications

-Engine ModelCat C9.3 ACERT™
-Flywheel Power215 mm H2O (161 kg/mm)
-Operating Weight47138 lb (21382 null)
-Displacement567 in³ (9.3 l)
-Fuel Tank97.2 gal (US) (368 l)
-Cooling System12.2 gal (US) (46 l)
-Engine Crankcase6.5 gal (US) (24.6 l)
-Power Train39.1 gal (US) (148 l)
-Final Drive - Each3.6 gal (US) (13.5 l)
-Roller Frames - Each6.6 gal (US) (25 l)
-Pivot Shaft Compartment1.3 gal (US) (5 l)
-Hydraulic Tank16.5 gal (US) (62.5 l)
-Length - Basic Tractor(2)16.08 ft (4894 mm)
-Ground Pressure (ISO 16754)(3)9.78 psi (67.4 kPa)
-Ground Clearance15 in (375 mm)
-Length - Track on Ground9.25 ft (2814 mm)
-Machine Height - To Product Link Antenna(1)10.67 ft (3253 mm)
-Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
-Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
-Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
-Width - Tractor - Without Trunnions - Standard Track8 ft (2440 mm)
-Length - Basic Tractor(2)13.83 ft (4210 mm)
-Ground Clearance15 in (375 mm)
-Width - Tractor - Without Trunnions - Standard Track10.33 ft (3143 mm)
-Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
-Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
-Ground Pressure (ISO 16754)(3)8.66 psi (59.7 kPa)
-Width - Tractor - Without Trunnions - Standard Track8.92 ft (2717 mm)
-Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
-Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
-Machine Height - To Product Link Antenna(1)10.67 ft (3253 mm)
-Length - Track on Ground9.25 ft (2814 mm)
-Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
-Machine Height - To Product Link Antenna(1)10.67 ft (3253 mm)
-Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
-Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
-Machine Height - To Product Link Antenna(1)10.83 ft (3303 mm)
-Length - Track on Ground10.67 ft (3245 mm)
-Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
-Width - Tractor - Without Trunnions - Standard Track9.83 ft (2996 mm)
-DEF Tank4.5 gal (US) (17.1 l)
-NoteOperating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.
-LGP VPAT54526 lb (24733 null)
-Build Number19
-Length - Basic Tractor(2)16.42 ft (5002 mm)
-Ground Pressure (ISO 16754)(3)6.92 psi (47.7 kPa)
-Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
-Length - Track on Ground9.25 ft (2814 mm)
-Length - Basic Tractor(2)13.83 ft (4210 mm)
-Ground Pressure (ISO 16754)(3)6.64 psi (45.8 kPa)
-Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
-Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
-Ground Clearance16 in (406 mm)
-Width - Tractor - Without Trunnions - Standard Track9.17 ft (2792 mm)
-Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
-Ground Clearance15 in (375 mm)
-Note (3)(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
-LGP S-Blade4.96 yd³ (3.79 m³)
-LGP A-Blade6.46 yd³ (4.94 m³)
-XW VPAT54045 lb (24515 null)
-XW SU48909 lb (22185 null)
-XL A - Blade5.17 yd³ (3.95 m³)
-XL SU - Blade7.26 yd³ (5.55 m³)
-XW VPAT - Blade6.57 yd³ (5.02 m³)
-XW SU - Blade7.38 yd³ (5.64 m³)
-XW A - Blade5.69 yd³ (4.35 m³)
-XL VPAT - Blade6.07 yd³ (4.64 m³)
-XW A49797 lb (22588 null)
-XL VPAT53042 lb (24060 null)
-Note (1)All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
-Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm245 mm H2O (183 kg/mm)
-Net Power - 2,200 rpm - ISO 9249/SAE J1349215 mm H2O (161 kg/mm)
-EmissionsU.S. EPA Tier 4 Final
-Note (2)Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
-LGP A53829 lb (24417 null)
-XL SU47138 lb (21382 null)
-XL A47846 lb (21703 null)
-LGP S51385 lb (23299 null)
-LGP VPAT - Blade6.57 yd³ (5.02 m³)
-LGP A-Blade16.6 ft (5072 mm)
-Note (2)(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
-Note (1)(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
-Machine Height - To Product Link Antenna(1)10.83 ft (3303 mm)
-Length - Track on Ground10.67 ft (3245 mm)
-Width - Tractor - Without Trunnions - Standard Track10.5 ft (3201 mm)
-Ground Clearance16 in (406 mm)
-Length - Track on Ground10.67 ft (3245 mm)
-Length - Basic Tractor(2)16.42 ft (5002 mm)
-Ground Pressure (ISO 16754)(3)6.28 psi (43.3 kPa)
-Length - Basic Tractor(2)14.5 ft (4415 mm)
-Ground Pressure (ISO 16754)(3)5.11 psi (35.2 kPa)
-XL SU - Blade10.7 ft (3261 mm)
-XL A - Blade13.7 ft (4160 mm)
-LGP VPAT - Blade13.7 ft (4160 mm)
-LGP S-Blade13.3 ft (4063 mm)
-XL VPAT - Blade12.7 ft (3880 mm)
-XW A - Blade14.8 ft (4520 mm)
-Ground Clearance16 in (406 mm)
-XW VPAT - Blade13.7 ft (4160 mm)
-XW SU - Blade11.7 ft (3562 mm)
-Machine Height - To Product Link Antenna(1)10.83 ft (3303 mm)

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

140M2
$315,000
View More
938M
$195,000
View More
140M
$190,000
View More