D7E Dozers | Bulldozers | Crawler Dozers

Cat D7E Dozer Features and Benefits Cat D7E Dozer Features and Benefits
Cat D7E - Efficiency by the Numbers Cat D7E - Efficiency by the Numbers
Request Info

SPECS SUMMARY

Engine ModelCat C9.3
Power - Net238 HP (178 kW)
Operating Weight57441 lb (26055 kg)
EmissionsU.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)
Since the introduction of the D7E dozer, customers worldwide have saved millions of liters/gallons of diesel fuel and reduced overall emissions.* The D7E features an innovative diesel-electric power train that helps you save money by getting more work done while using significantly less fuel. Electric drive gives you the power you need for dozing, along with the smooth operation and agile maneuverability suited to a wide variety of applications. The new D7E meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards. *Compared to the D7R2.

Specifications

Engine ModelCat C9.3
Power - Net238 HP (178 kW)
Operating Weight57441 lb (26055 kg)
EmissionsU.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)
Net Power - Rated - ISO 9249/SAE J1349238 HP (178 kW)
Net Power - Rated - ISO 9249/SAE J1349 (DIN)241 HP (241 HP)
TypeElectric Drive
Note (1)All non road Tier 4 Interim and Final, Stage IIIB and IV, Japan 2014 (Tier 4 Final) and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Fuel Tank108 gal (US) (409 l)
DEF Tank4.6 gal (US) (17.5 l)
Operating Weight - STD SU57441 lb (26055 kg)
Operating Weight - LGP S62886 lb (28525 kg)
Ground Pressure10 psi (69.3 kPa)
Ground Pressure - LGP6.3 psi (43.8 kPa)
S-Blade Capacity6.75 yd³ (5.16 m³)
SU - Blade Capacity8.98 yd³ (6.86 m³)
U-Blade Capacity10.91 yd³ (8.34 m³)
A-Blade Capacity6.74 yd³ (5.15 m³)
S-Blade Width - LGP7.7 ft (5.89 mm)
S-Blade Width12.81 ft (3904 mm)
SU - Blade Width12.18 ft (3713 mm)
U-Blade Width13.08 ft (3988 mm)
A-Blade Width14.77 ft (4503 mm)
S-Blade Capacity - LGP14.91 ft (4545 mm)
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg of refrigerant which has a CO2 equivalent of 1.716 metric tonnes.

Benefits and Features

  • Up to 30% more fuel efficient than the D7R2.
  • Productive – moves 10% more material per hour.
  • Better fuel economy plus greater productivity means you can move upto 35% more material per gallon/liter of fuel.
  • Fewer moving parts, less fuel and fluid and longer service intervals help reduce lifetime owning and operating costs.

    Note: All comparisons to D7R2

  • Spacious cab with center-post design gives you outstanding visibility all around the machine for increased confidence and safely.
  • Added comforts include manually adjustable armrests and a heated/ventilated seat option.
  • Add Grade Control display to put working information conveniently in front of the operator.
  • Heating, ventilation and air conditioning (HVAC) system is self contained.
  • Ergonomic implement and steering controls are fully adjustable and offer low-effort comfort.
  • Switches and controls for machine systems are located within easy reach.
  • Speed Recall allows operators to pre-set the desired forward and reverse travel speed, and then resume that speed with the press of a button.
  • Implement Lock-Out prevents inadvertent operation of hydraulic attachments.

  • Standard Stable Blade Control complements operator input to automatically make instantaneous adjustments for smoother grading results with less effort.
  • In-cab main fall/cross slope display shows you real-time grade percentage during slope work.
  • Traction Control reduces track slip for improved productivity, more fuel efficiency and reduced undercarriage wear.
  • When in use, Economy Mode automatically adjusts engine speed when machine is not under load to save you even more fuel.
  • Product Link™ collects machine data that can be viewed online through web and mobile applications.
  • Access information anytime, anywhere with VisionLink® – and use it to make informed decisions that boost productivity, lowercosts, simplify maintenance, and improve safety and security on your job site.
  • The Cat App helps you manage your assets – at any time – right from your smartphone. See fleet location and hours, get critical required maintenance alerts, and even request service from your local Cat dealer.

  • Differential steering combines with electric drive to make the D7E so maneuverable that it can perform both uninterrupted power turns under load and “locked-track” pivot turns.
  • The electric drive system is highly efficient at delivering engine power to the ground, and an infinitely variable speed control means smooth operations with no gears to shift.
  • A robust, single lift cylinder design and L-shaped push arms give you an advantage over diagonal brace designs by bringing the blade closer to the machine. Provides better balance, stability, maneuverability and blade penetration.

  • Easy access to service points, fewer moving parts and longer service intervals, add up to significantly lower owning and operating costs.
  • Tilt cab allows easy access to major modular components: generator, propulsion module, power electronics and hydraulics.
  • Heating, ventilation and air conditioning (HVAC) system is self contained for improved performance, increased service intervals and ease of serviceability.
  • Service points are grouped on the left side of the machine for quick and easy routine maintenance.
  • Ground-level sight gauges let you inspect fluid levels at a glance.
  • Modular final drives are easily accessed for maintenance.
  • Optional high-speed oil change attachment makes servicing even faster.
  • Shovel mounting bracket on the back of the machine means quick undercarriage cleanouts on the go.
  • Ground level service center on the left fender offers easy access to the battery disconnect, hour meter, remote engine shutdown and access light switches. It also houses an LED warning indicator showing that the power train and accessory systems are energized. When the systems are de‑energized and safe for maintenance, the indicator turns off.

  • Pull-down ladder provides convenient access for fueling and to the back of the machine.
  • Seat belt indicator registers a fault code through Product Link if the operator fails to buckle up, helping to improve your job site safety.
  • Center-post cab with angled doors offers excellent visibility to help operators work more safely.
  • Rear vision camera is available to enhance visibility behind the machine.
  • Operator Presence detection system allows the machine to idle when the operator is not seated, but locks out the power train and front implements to avoid unintentional movement.
  • Convenient steps and handles help you get on and off the tractor with greater ease. Access lighting can be turned on from a ground level switch.

  • Specialized guarding, striker bars and seals help protect the machine from impact and airborne debris.
  • Purpose-built heavy duty final drive guarding help prevent wire, cables, rope and debris from wrapping into the final drive seals.
  • Heavy duty sealed bottom guards protect the engine and power train system.
  • Reversing fan and single plane cooling cores with 6 fins per inch are ideal for high debris environments. Easy access clean out.
  • Insulated Clean Emissions Module for thermal protection.
  • Lights are mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.
  • Specialized air handling features help deliver cleaner air to the machine and to the cab.

Standard Equipment

  • Aftercooler, Air to Air
  • Air Cleaner, Precleaner with Strata
  • Tube Dust Ejector
  • C9.3 Engine: – Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) – Certified Engine with Aftertreatment
  • Coolant, Extended Life
  • Differential Steering
  • Ecology Drains (Engine Oil, Coolant, Hydraulic Oil, Fuel Tank, Power Train Case)
  • Electronic Air Cleaner Service Indicator
  • Fan, Hydraulically Driven Demand
  • Final Drives, Double Reduction
  • Generator, AC
  • Parking Brake
  • Power Inverter
  • Propulsion Module, Transmission, Continuously Variable
  • Prescreener
  • Radiator, Core, Aluminum Bar Plate
  • Separate Circuit Core, Aluminum Bar Plate
  • Starting Aid, Ether
  • Transmission, Continuously Variable
  • Turbocharger, Wastegated
  • Water Separator, Primary Fuel Filter
  • Guards, End Track Guiding
  • Heavy Duty Track (610 mm/24" Moderate Service)
  • Master Link
  • Rollers and Idlers, Lifetime Lubricated
  • Sprocket Rim Segments, Replaceable
  • Track Adjusters, Gas Spring Recoil
  • Undercarriage, Heavy Duty
  • Accessory Power Converter (APC)
  • Alarm, Backup
  • Batteries, Maintenance Free (1,000 CCA)
  • Converter, 24V to 12V, 10 Amp
  • Heater, Engine Coolant, 120V
  • Horn, Forward Warning
  • Starter, Heavy Duty
  • Armrest, Adjustable
  • Bidirectional Shift Switch
  • CB Ready
  • Cab, Center Post, Integral ROPS/FOPS
  • Continuously Variable Speed Control
  • Controls, Electro-Hydraulic, Pilot
  • Operated with Electronic Deactivation Switch
  • Foot Supports, Dash
  • Hour Meter, Electronic
  • Machine Isolation
  • Mirror, Rearview
  • Modular HVAC, Cab Mounted
  • Monitoring System, Electronic, with Coolant, Power Train Oil, and Hydraulic Oil Temperature, Fuel Gauge, Tachometer, Gear Indicator and Diagnostic Functions
  • Operator Presence
  • Pedal, Travel Control
  • Radio Ready, 12V
  • Seat Belt, Retractable, 76 mm (3 in)
  • Seat, Cloth, Air Suspension
  • Speed Recall Button
  • Throttle Dial, Electronic with Eco Reverse
  • Wipers, Intermittent
  • CD ROM Parts Book
  • Cab, Tilt
  • Engine Enclosures, Perforated
  • Front Tow Hook
  • Ground Level Hour Meter
  • Ground Level Engine Shutdown
  • Guards, Hinged Bottom
  • Guard, Final Drive Flange
  • Hood, Perforated
  • Hydraulics, Load Sensing, Dozer Lift and Tilt
  • Oil Cooler, Hydraulic
  • Oil Cooler, Power Train
  • Product Link
  • Radiator Doors, Louvered, Double Hinged
  • Screen, Grill Door Fan
  • S·O·S Sampling Ports
  • Vandalism Protection for Fluid Compartments and Battery Box

Optional Equipment

  • Final Drive: – Cold Weather (STD, LGP) – Clamshell (STD, LGP)
  • Engine: – Sound Suppressed, Basic – Thermal Shield – Sound Suppressed and Thermal Shield
  • High Speed Oil Change System
  • Precleaner, with Screen
  • Fuel Group, Heater
  • Fast Fill Fuel System
  • Heavy Duty Battery
  • Cold Weather Fluids
  • Arctic Engine Coolant (–51° C/–60° F)
  • Track: – 610 mm (24 in): - Extreme Service - Extreme Service Rotating Bushing Track - Moderate Service - Moderate Service Rotating Bushing Track - Extreme Service Trapezoidal - Moderate Service Trapezoidal – 660 mm (26 in): - Extreme Service - Moderate Service - Extreme Service Trapezoidal – 915 mm (36 in): - Extreme Service - Extreme Service Trapezoidal - Self Cleaning
  • Undercarriage (STD, LGP): – MS Guide – Full Guide – Guarded – Arctic
  • Lights: – Basic – Premium – Premium, Rear Screen – Sweeps – Sweeps, Rear Screen
  • Converter, 24V to 12V
  • Receptacle, Jump Start
  • Strobe Light Warning
  • Enhanced Cab Air Cleaner, Roof Mounted
  • Heated Seat
  • Heated and Ventilated Seat
  • Sliding Rear Window
  • Single Camera Visibility Arrangement
  • Fast Fuel
  • Lights: – Basic – Premium – Screen
  • Fuel Tank
  • Fuel Tank, Waste
  • Bottom, Sealed
  • Screen: – Rear – Rear and Side – Screen or Sweeps Ready
  • Sweeps
  • Door: – Screen – Half Screen
  • Final Drive Flange
  • Single Tilt or Single Tilt Guarded (STD, LGP)
  • Dual Tilt or Dual Tilt Guarded (STD, LGP)
  • S (Straight)
  • S LGP Landfill
  • SU (Semi-Universal)
  • U (Universal)
  • A (Angle)
  • SU Wear Plate
  • SU Rock Guard and Wear Plate
  • Installation, AccuGrade Ready
  • Mounting, AccuGrade Receivers (STD, LGP)
  • Hydraulics, Dual Tilt
  • Auto Reversing Hydraulic Fan
  • Hydraulic Implement Towing Arrangement
  • Hydraulics, Ripper
  • PA90 Winch, Variable Speed
  • Ladder Group: – Standard – Waste
  • Multi Shank Ripper
  • Drawbar, Rigid
  • Ripper with Striker Bar
  • Counterweight Box, Rear
  • Striker Bar, Box
  • Additional Ripper Tooth