Cat® Waste Handlers in Action | Landfill Applications Cat® Waste Handlers in Action | Landfill Applications

SPECS SUMMARY

Engine ModelCat C15 ACERT™
Flywheel Power335 HP (252 kW)
Bore5.4 in (137 mm)
Stroke6.75 in (172 mm)
From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.


Specifications

Engine ModelCat C15 ACERT™
Flywheel Power335 HP (252 kW)
Bore5.4 in (137 mm)
Stroke6.75 in (172 mm)
Displacement928 in³ (15.2 l)
Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN)317 HP (233 kW)
Net Power - Maximum - ISO 9249/SAE J1349 DIN at 1,700 rpm343 HP (252 kW)
Net Power - 1,900 rpm - ISO 9249/SAE J1349312 HP (233 kW)
Net Power - Maximum - ISO 9249/SAE J1349 at 1,700 rpm335 HP (252 kW)
Operating Weight86710 lb (39366 kg)
Standard Waste Handler73400 lb (33324 kg)
LGP Waste Handler91600 lb (41586 kg)
LGP Waste Handler77900 lb (35367 kg)
Standard Waste Handler86710 lb (39366 kg)
Machine Height - Grouser Tip - Exhaust Stack136.7 in (3472 mm)
Machine Height - Grouser Tip - Length of Track on Ground126.2 in (3206 mm)
Without Trunnions - Standard Shoe Width130 in (3302 mm)
Machine Height - Grouser Tip - Ground Clearance23.8 in (606 mm)
Height - Top of Roof-Mounted Precleaner145.2 in (3706 mm)
Height - Top of Roof-Mounted Precleaner145.2 in (3706 mm)
Machine Height - Grouser Tip - Length of Track on Ground128.3 in (3258 mm)
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*183 in (4647 mm)
Height - Grouser3.1 in (78 mm)
Note*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Width - Tractor - Over Trunnions120.4 in (3057 mm)
Machine Height - Grouser Tip - EROPS (Top of Railing)140.4 in (3566 mm)
Width - Tractor - Over Trunnions130.4 in (3311 mm)
Length - Basic Tractor - With Striker Bars with Two Counterweights*206.4 in (5256 mm)
Track Gauge82 in (2083 mm)
Machine Height - Grouser Tip - EROPS (Top of Railing)140.7 in (3575 mm)
Height - Grouser3.1 in (78 mm)
Track Gauge82 in (2083 mm)
Machine Height - Grouser Tip - Exhaust Stack136.3 in (3463 mm)
Machine Height - Grouser Tip - Ground Clearance24.1 in (613 mm)
Width - Tractor - Over Trunnions120.4 in (3057 mm)
Height - Top of Roof-Mounted Precleaner145.2 in (3706 mm)
Length - Basic Tractor - With Striker Bars with Two Counterweights*206.4 in (5256 mm)
Track Gauge92 in (2337 mm)
Length - Basic Tractor - With Striker Bars with Two Counterweights*206.4 in (5256 mm)
Without Trunnions - Standard Shoe Width106 in (2693 mm)
Without Trunnions - Standard Shoe Width106 in (2693 mm)
Machine Height - Grouser Tip - Exhaust Stack129.7 in (3295 mm)
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*183 in (4647 mm)
Note*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*183 in (4647 mm)
Height - Grouser3.1 in (78 mm)
8 U Landfill27.7 yd³ (21.2 m³)
8 SU LGP Landfill14.9 ft (4531 mm)
8 SU Landfill12.9 ft (3931 mm)
8 SU LGP Landfill28.9 yd³ (22.1 m³)
8 U Landfill13.9 ft (4251 mm)
8 SU Landfill25.6 yd³ (19.6 m³)
2 Forward3.8 mile/h (6.1 km/h)
1 Reverse2.8 mile/h (4.5 km/h)
3 Forward6.6 mile/h (10.6 km/h)
Machine Height - Grouser Tip - Ground Clearance24.1 in (613 mm)
3 Reverse8.8 mile/h (14.2 km/h)
Machine Height - Grouser Tip - Length of Track on Ground126.2 in (3206 mm)
Note*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
1 Forward2.1 mile/h (3.4 km/h)
Machine Height - Grouser Tip - EROPS (Top of Railing)140.4 in (3566 mm)
Note (3)The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
2 Reverse5 mile/h (8 km/h)
EmissionsTier 4 Final/Stage IV/Korea Tier 4
Note (2)Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (1)All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.

Benefits and Features

  • Specialized guarding throughout the machine helps protect major components like the chassis, fuel tank and hydraulic tank from impact and airborne debris.
  • Final drive guarding helps prevent wire wrap and helps keep dirt and debris away from the Duo-Cone™ seals.
  • Pivot shaft seal guards help prevent debris from entering and damaging seals.
  • Striker bars help prevent debris from damaging the machine, and added seals help reduce the amount of material entering engine and transmission compartments.
  • Rotating bushings on tilt cylinders helps wrapping material to roll off hoses.
  • Heavy duty hinged radiator guard protects radiator and fan from penetration by material coming straight in or from under the blade.
  • Cooling system designed for high debris environments, with automatic reversing fan and swing-out access for cleanout with an air wand.
  • Laminated thermal shields and insulated Clean Emissions Module.
  • Hinged belly guard for easy cleaning.
  • Landfill blades and center-hole track shoes help you optimize your waste handler for the job.
  • Lights mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.

  • Comfortable, quiet operator station with excellent visibility and air handling features to help keep dust out/provide air filtration.
  • Enhanced AutoShift allows your operator to select optimum ground speed for the job and helps save fuel by automatically choosing the more efficient gear based on load.
  • Low effort, responsive controls for precision and ease of operation.
  • Selectable electro-hydraulic maps let you set implement response to match operator preferences and application.
  • Rear vision camera available to enhance visibility behind the machine.
  • Meets U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 emission standards with emissions technology that is transparent – no action required from the operator, no stopping for regeneration.

  • Cat Slope Indicate (Standard) shows cross slope and mainfall on the primary machine display to help operators work more confidently.
  • Cat GRADE with 3D (Optional) is an integrated grade control system that helps operators grade with more accuracy and efficiency. Antennas mount on top of the cab – not on the blade – so they are safely out of the way of landfill debris.
  • Cat AccuGrade™ (Optional) is a dealer-installed aftermarket grade-control system that provides increased grading versatility and the ability to scale capacity to changing needs, providing a choice of lasers for 2D flat-plane and slope work, Global Navigation Satellite System (GNSS) control for complex 3D cuts and contours, and/or systems using a Universal Total Station (UTS) for fine and finish grading.
  • Cat AccuGrade Ready Option (ARO) (Optional) allows you to easily install or upgrade to Cat AccuGrade 2D and 3D grade-control systems to add versatility and resale value to your machine.
  • Remote monitoring with Product Link™*/VisionLink® helps you manage your fleet more effectively and profitably.
*Product Link not available in all areas. Please consult your Cat dealer for details.