SPECS SUMMARY

Engine ModelCat C15 ACERT™
Flywheel Power354 HP (264 kW)
Operating Weight86900 lb (39420 kg)
The Cat D8T dozer has a long history of outstanding versatility, productivity and resale value. Because this bulldozer excels across a wide range of tasks, customers choose the D8T for everything from dozing, ripping, scraper work and land clearing to finish grading. And with features designed for even greater comfort, productivity and fuel efficiency, today's D8T does even more to help you meet your business objectives.


Specifications

-Engine ModelCat C15 ACERT™
-Flywheel Power354 HP (264 kW)
-Operating Weight86900 lb (39420 kg)
-Operating Weight - Standard87600 lb (39750 kg)
-EmissionsU.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4
-Net Power - 1,900 rpm - ISO 9249/SAE J1349354 HP (264 kW)
-Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN)317 HP (359 kW)
-Engine Power - 1,600 rpm - ISO 14396394 HP (294 kW)
-Engine Power - 1,600 rpm - ISO 14396 (DIN) (400 kW)
-Displacement928 in³ (15.2 l)
-Note (3)All nonroad Tier 4 Final, Stage IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS� or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
-Note (4)Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
-8SU - Capacity - SAE J126513.4 yd³ (10.3 m³)
-8SU - Width - Over End Bits13.3 ft (4042 mm)
-8U - Capacity - SAE J126515.4 yd³ (11.8 m³)
-8U - Width - Over End Bits14 ft (4265 mm)
-Bore5.4 in (137 mm)
-Stroke6.75 in (172 mm)
-8A - Capacity - SAE J12656.8 yd³ (5.2 m³)
-8A - Width - Over End Bits16.5 ft (5043 mm)
-8SU LGP - Capacity - SAE J126512.9 yd³ (9.9 m³)
-8SU LGP - Width - Over End Bits14.9 ft (4543 mm)
-1 Forward2.1 mile/h (3.4 km/h)
-2 Forward3.8 mile/h (6.1 km/h)
-Fuel Tank165 gal (US) (627 l)
-3 Forward6.6 mile/h (10.6 km/h)
-1 Reverse2.8 mile/h (4.5 km/h)
-2 Reverse5 mile/h (8 km/h)
-DEF Tank6.3 gal (US) (24 l)
-3 Reverse8.8 mile/h (14.2 km/h)
-Cooling System22.7 gal (US) (86 l)
-Engine Crankcase*10 gal (US) (38 l)
-Power Train41 gal (US) (155 l)
-Roller Frames - Each17.2 gal (US) (65 l)
-Final Drive - Each3.3 gal (US) (12.5 l)
-Pivot Shaft Compartment10.6 gal (US) (40 l)
-Hydraulic Tank19.8 gal (US) (75 l)
-Note*With oil filter
-Standard87600 lb (39750 kg)
-LGP83200 lb (37750 kg)
-Pump TypePiston-type, Variable Displacement
-Operating Weight - Standard87400 lb (39650 kg)
-Pump Output - Steering75 gal/min (284 l/min)
-Pump Output - Implement64 gal/min (244 l/min)
-Operating Weight - LGP92300 lb (41850 kg)
-Tilt Cylinder Flow - Rod End Flow35 gal/min (132 l/min)
-Tilt Cylinder Flow - Head End Flow45 gal/min (170 l/min)
-1.0 Forward2.2 mile/h (3.5 km/h)
-Bulldozer Relief Valve Setting3480 psi (24000 kPa)
-2.0 Forward4.1 mile/h (6.6 km/h)
-Tilt Cylinder Relief Valve Setting3480 psi (24000 kPa)
-3.0 Forward7 mile/h (11.3 km/h)
-Ripper - Lift - Relief Valve Setting3480 psi (24000 kPa)
-Ripper - Pitch - Relief Valve Setting3480 psi (24000 kPa)
-Steering5700 psi (39200 kPa)
-2.0 Reverse4 mile/h (6.4 km/h)
-Winch ModelPA 140OVS
-Weight*3947 lb (1790 kg)
-Oil Capacity4 gal (US) (15 l)
-Increased Tractor Length22.2 in (563 mm)
-3.0 Reverse7.3 mile/h (11.8 km/h)
-Winch Case - Width45.6 in (1160 mm)
-1 Forward - Drawbar Pull148200 lb (659.2 kN)
-Drum Width12.6 in (320 mm)
-Flange Diameter18 in (457 mm)
-2 Forward - Drawbar Pull82300 lb (366.1 kN)
-3 Forward - Drawbar Pull46250 lb (205.8 kN)
-Width - Tractor - Without Trunnions - Standard Shoes106 in (2693 mm)
-Machine Height - ROPS/FOPS Cab140.4 in (3566 mm)
-Length - Track on Ground126.2 in (3206 mm)
-Note (1)*Includes blade tilt cylinder.
-Note (2)**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Digging Depth22.6 in (574 mm)
-Height8.1 ft (2467 mm)
-Ground Clearance50.7 in (1288 mm)
-Maximum Tilt35.1 in (892 mm)
-Digging Depth24.6 in (625 mm)
-Ground Clearance52.1 in (1323 mm)
-Height3.9 ft (1177 mm)
-Capacity - SAE J126525.6 yd³ (19.6 m³)
-Width - Over End Bits12.9 ft (3931 mm)
-Weight* - Without Hydraulic Controls7867 lb (3569 kg)
-Total Operating Weight** - With Blade and Single-Shank Ripper88800 lb (40282 kg)
-Total Operating Weight** - With Blade and Single-Shank Ripper83635 lb (37467 kg)
-Capacity - SAE J126528.9 yd³ (22.1 m³)
-Digging Depth20.2 in (513 mm)
-Weight - Each Additional Shank732 lb (332 kg)
-Total Operating Weight* - With SU-Blade and Ripper86900 lb (39420 kg)
-Pry-Out Force50070 in (222.7 mm)
-Weight - With One Shank8681 lb (3946 kg)
-Note*Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Maximum Penetration Force - Shank Vertical28620 lb (127.3 kN)
-Maximum Penetration - Standard Tip44.4 lb (1130 kN)
-Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole25 in (636 mm)
-Maximum Tilt28.9 in (733 mm)
-Weight* - Without Hydraulic Controls8705 lb (3957 kN)
-Note (1)*Includes blade tilt cylinder.
-Note (2)**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Number of Pockets1
-Weight* - Without Hydraulic Controls7734 lb (3508 kg)
-Maximum Tilt35.7 in (908 mm)
-Height7.9 ft (2421 mm)
-FOPSFalling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II.
-ROPSRollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
-Ground Clearance51.5 in (1308 mm)
-Width - Over End Bits14.9 ft (4531 mm)
-Maximum Tilt39.2 in (996 mm)
-Total Operating Weight* - With SU-Blade and Ripper86876 lb (39409 kg)
-Note*Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Note (1)The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
-Note (2)Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods.
-Note (3)Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “European Union Directives” – The information below applies to only the machine configurations that have the “CE” mark on the Product Identification Plate.
-Note (4)Complete system consists of pump, tank, filter, oil cooler, valves, lines, and control levers.
-Note (3)Electro-hydraulic pilot valve assists operations of ripper and dozer controls. A standard hydraulic system includes four valves.
-Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator.
-Note (2)No derating required up to 3566 m (11,700 ft) altitude, beyond 3566 m (11,700 ft) automatic derating occurs.
-Note (1)Steering Pump output measured at 2,364 rpm (pump speed) and 30 000 kPa (4,351 psi).
-Note (2)Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
-Note (4)The declared dynamic operator sound pressure level is 75 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
-Note (5)The declared exterior sound power level is 113 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in “ISO 6395:2008.” The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
-Note (4)Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 965 mm (38 in) MS shoes.
-Note (3)Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 610 mm (24 in) MS shoes.
-Shipping Weight - LGP77900 lb (35367 kg)
-Shipping Weight - Standard73400 lb (33324 kg)
-Note (2)Variable speed, hydraulically driven, dual braking system, three roller fairlead.
-Note (2)Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, 965 mm (38 in) MS shoes, striker box, and operator.
-Note (1)Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, striker box, 610 mm (24 in) MS shoes, and operator.
-Note (1)Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) MS shoes, and operator.
-Note (2)Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, 965 mm (38 in) MS shoes, and operator.
-Note (3)Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) MS shoes.
-Note (4)Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 965 mm (38 in) MS shoes.
-Engine Power - 1,700 rpm - SAE J1995363 HP (271 kW)
-Engine Power - 1,700 rpm - ISO 14396 (DIN)364 HP (268 kW)
-Maximum Tilt35.7 in (908 mm)
-Height5.3 ft (1622 mm)
-Note (1)*Includes blade tilt cylinder.
-Note (2)**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Total Operating Weight** - With Blade and Single-Shank Ripper82496 lb (36950 kg)
-Ground Clearance51.5 in (1308 mm)
-Digging Depth20.2 in (513 mm)
-Note (2)**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Total Operating Weight** - With Blade and Single-Shank Ripper88700 lb (40281 kg)
-Weight* - Without Hydraulic Controls11900 lb (5121 kg)
-Capacity - SAE J126512.9 yd³ (9.9 m³)
-Weight* - Without Hydraulic Controls11150 lb (4703 kg)
-Width - Over End Bits14.9 ft (4531 mm)
-Total Operating Weight** - With Blade and Single-Shank Ripper90383 lb (41000 kg)
-Note (2)**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Weight* - Without Hydraulic Controls9450 lb (4287 kg)
-Width - Over End Bits13.9 ft (4251 mm)
-Engine Power - 1,700 rpm - ISO 14396359 HP (268 kW)
-Note (1)*Includes blade tilt cylinder.
-Pry-Out Force - Multi-Shank Ripper with One Tooth51230 lb (222.9 kN)
-Capacity - SAE J126527.7 yd³ (21.2 m³)
-Digging Depth22.3 in (567 mm)
-Ground Clearance48.8 in (1239 mm)
-Height8.3 ft (2530 mm)
-Note (1)*Includes blade tilt cylinder.
-Weight* - Without Hydraulic Controls10557 lb (4789 kg)
-Ground Pressure (ISO 16754)7.7 psi (53.3 kPa)
-Grouser Height3.1 in (78 mm)
-Length - Track on Ground126 in (3206 mm)
-Ground Contact Area9593 in² (6.19 m²)
-Ground Clearance24.1 in (613 mm)
-Track Gauge82 in (2083 mm)
-Track Rollers - Each Side8
-Width - Shoe24 in (610 mm)
-Pitch8.5 in (216 mm)
-Shoe TypeModerate Service
-Width - Over End Bits16.6 ft (5045 mm)
-Capacity - SAE J126511.3 yd³ (8.6 m³)
-Digging Depth22.6 ft (574 mm)
-Capacity - SAE J12656.8 yd³ (5.2 m³)
-Width - Shoe38 in (965 mm)
-Shoes/Side44
-Overall Beam Width97 in (2464 mm)
-Track Rollers - Each Side8
-Shoes/Side44
-Shoe TypeModerate Service
-Net Power - Rated - ISO 9249/SAE J1349 (DIN)317 HP (233 kW)
-Operating Weight - LGP82496 lb (37420 kg)
-Shipping Weight - LGP68700 lb (31160 kg)
-Net Power - Rated - ISO 9249/SAE J1349312 HP (233 kW)
-Engine Power - Maximum - SAE J1995363 HP (271 kW)
-Overall Length - Basic Tractor183 in (4647 mm)
-Engine Power - Maximum - ISO 14396359 HP (268 kW)
-Engine Power - Maximum - ISO 14396 (DIN)364 HP (268 kW)
-Shipping Weight - Standard SU Blade66300 lb (30070 kg)
-Drawbar Pull - 1 Forward148 lb (661.1 kN)
-Grouser Height3.1 in (78 mm)
-Length - Track on Ground126 in (3206 mm)
-Pitch8.5 in (216 mm)
-Ground Pressure (ISO 16754)13 psi (89.6 kPa)
-Ground Contact Area6060 in² (3.91 m²)
-Drawbar Pull - 2 Forward81 lb (363.1 kN)
-Drawbar Pull - 3 Forward44 lb (197.5 kN)
-Ground Clearance24.1 in (613 mm)
-Ground Clearance50.7 in (1288 mm)
-Track Gauge92 in (2337 mm)
-Width - Over End Bits13.9 ft (4251 mm)
-Cable Ferrule Size - Length2.76 in (70 mm)
-Height5.5 in (1690 mm)
-Weight* - Without Hydraulic Controls11500 lb (4895 kg)
-Total Operating Weight** - With Blade and Single-Shank Ripper88300 lb (40055 kg)
-Maximum Tilt39.2 in (996 mm)
-Note (1)*Includes blade tilt cylinder.
-Note (2)**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Cable Ferrule Size - Outside Diameter2.36 in (60 mm)
-Drum Capacity - Optional Cable193 ft (59 m)
-Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole23.35 in (593 mm)
-Maximum Penetration - Standard Tip30.7 in (780 mm)
-Maximum Penetration Force - Shank Vertical27920 lb (124.2 kN)
-Winch Length56.3 in (1430 mm)
-Recommended Cable Size1.13 in (29 mm)
-Drum Capacity - Recommended Cable Size276 ft (84 m)
-Note (1)*Weight: Includes pump and operator controls.
-Optimal Cable Size1.25 in (32 mm)
-Height5.7 ft (1741 mm)
-Ground Clearance48.8 in (1239 mm)
-Width - Over End Bits12.9 in (3931 mm)
-Capacity - SAE J126513.4 yd³ (10.3 m³)
-Digging Depth22.8 in (578 mm)
-Weight* - Without Hydraulic Controls10100 lb (4260 kg)
-Total Operating Weight** - With Blade and Single-Shank Ripper86900 ft (39420 mm)
-Maximum Tilt35.1 lb (892 kg)
-Note (1)*Includes blade tilt cylinder.
-Note (2)**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Ground Clearance48.7 in (1236 mm)
-Height5.7 ft (1750 mm)
-Width - Over End Bits13.3 ft (4041 mm)
-Capacity - SAE J126515.4 yd³ (11.8 m³)
-Digging Depth22.3 in (567 mm)
-Total Operating Weight** - With Blade and Single-Shank Ripper86900 lb (39420 kg)
-Note (2)**Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
-Maximum Tilt36 in (915 mm)
-Note (1)*Includes blade tilt cylinder.
-Number of Pockets3
-BrakesCrawler Machine Brake Requirements meets the following criteria: ISO 10265:2008.
-Ground Pressure (ISO 16754)13 psi (89.6 kPa)
-Ground Clearance24.1 in (613 mm)
-Width - Tractor - Without Trunnions - Standard Shoes106 in (2693 mm)
-Machine Height - ROPS/FOPS Cab140.7 in (3575 mm)
-Length - Track on Ground128.3 in (3258 mm)
-Overall Length - Basic Tractor183 in (4647 mm)
-Ground Pressure (ISO 16754)13 psi (89.6 kPa)
-Ground Clearance23.8 in (606 mm)
-Width - Tractor - Without Trunnions - Standard Shoes130 in (3302 mm)
-Machine Height - ROPS/FOPS Cab140.4 in (3566 mm)
-Length - Track on Ground126.2 in (3206 mm)
-Overall Length - Basic Tractor183 in (4647 mm)
-Ground Pressure (ISO 16754)7.7 psi (53.3 kPa)
-Ground Clearance2401 in (613 mm)
-Note (1)Add the following measurements for attachments: Ripper (single shank) 1519 mm/59.8 in; Ripper (multi-shank) 1613 mm/63.5 in; Drawbar 406 mm/16.0 in; SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; A Blade (not angled) 2027 mm/79.8 in; A Blade (angled 25 degrees) 3068 mm/120.8 in.
-Note (2)When Cat Grade Control 3D antennas are installed, overall machine height increases by approximately 82 mm/3.2 in.

Benefits and Features

Standard Equipment

  • POWER TRAIN
  • UNDERCARRIAGE
  • HYDRAULICS
  • STARTERS, BATTERIES, AND ALTERNATORS
  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • OTHER STANDARD EQUIPMENT

Optional Equipment

  • ELECTRICAL
  • GUARDS
  • OTHER ATTACHMENTS
  • LIFT CYLINDERS
  • BULLDOZERS
  • PUSH ARMS
  • RIPPER SHANK TEETH
  • BLADES

Featured Used Equipment

420FST
$62,500
View More
545D
$310,000
View More
262D
$38,000
View More
938M
$180,000
View More
938M
$195,000
View More