Engine Output - SAE J1995Cat C32 - 1516 kW (2,032 hp)
Standard Bucket CapacityFace Shovel (heaped 2:1) - 22.0 m3 (28.8 yd3); Backhoe (heaped 1:1) - 22.0 m3 (28.8 yd3)
Operating WeightFace Shovel - 405 tonnes (446 tons); Backhoe - 407 tonnes (449 tons)
We understand the challenges you face, the importance of reliability, and the relationship between uptime and productivity. That's why we continually strive to produce the safest, most reliable and productive hydraulic mining shovels possible. Offering the widest payload range of any manufacturer in the industry, the ability to optimally pair with our popular line of mining trucks, and the support of our world-class Cat dealer network, we are uniquely positioned to partner with you to help achieve your productivity targets. We understand what matters to you. Our hydraulic mining shovels are built with you in mind. Because in mining, every day matters and every load counts.


-Engine Output - SAE J1995Cat C32 - 1516 kW (2,032 hp)
-Standard Bucket CapacityFace Shovel (heaped 2:1) - 22.0 m3 (28.8 yd3); Backhoe (heaped 1:1) - 22.0 m3 (28.8 yd3)
-Operating WeightFace Shovel - 405 tonnes (446 tons); Backhoe - 407 tonnes (449 tons)
-Alternators2 × 150 A
-Type (8)Guards for shovel cylinders (FS)
-AspirationTurbocharged and air-to-air aftercooled
-All buckets (FS and BH) are equipped with a wear package consisting of: (2)- Wing shrouds on side walls - Heel shrouds at bottom edges
-System Voltage24V
-Components (5)2 LED high-brightness access flood lights
-Bore5.71 in (145 mm)
-InstallationRetractable service station installed underneath the engine module and easily accessible from ground
-Components (3)Heavy-duty air filters
-Displacement1959 in³ (32.1 l)
-EmissionsU.S. EPA flex
-Fuel Tank Capacity2060 gal (US) (7800 l)
-Components (5)Hydraulically driven radiator fan with electronically controlled fan speed
-Components (4)Microprocessed engine management
-Components (2)Two-stage fuel filter including water separator
-Components (4)10 LED high-brightness working flood lights - 8 for working area - 2 for rear end
-Components (1)Additional high-capacity water separator
-Components (1)13 LED service lights
-Type (5)Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring
-6040 - Ground Pressure24.3 N/cm2 (35.3 psi)
-6040 - NoteOther track pads available on request
-Type (4)Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders
-Type (3)Grease filters (200 μm) between service station and container, as well as directly behind grease pump
-Type (1)Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times
-Type (2)System failures displayed by Board Control System
-6040 - Operating Weight897930 lb (407300 kg)
-6040 - Standard Track Pads3.9 ft (1200 mm)
-Batteries in Series/Parallel Installation6 × 210 Ah - 12V each; 630 Ah - 24V in total
-Make/Model2 × Cat C32 (Tier 2)
-Components (2)Battery isolation relays and switches
-6040 FS - Standard Track Pads3.9 ft (1200 mm)
-6040 FS - Operating Weight891980 lb (404600 kg)
-6040 FS - Ground Pressure24.1 N/cm2 (35.0 psi)
-6040 FS - NoteOther track pads available on request
-Components (3)Emergency stop switches accessible from ground level, in engine module and in operator's cab
-Number of Cylinders - Each Engine12
-Bucket Payload44 t (40 t)
-Operating Weight - Backhoe449 t (407 t)
-Operating Weight - Front Shovel446 t (405 t)
-Bucket Capacity - Front Shovel (heaped 2:1)28.8 yd³ (22 m³)
-Bucket Capacity - Backhoe (heaped 1:1)28.8 yd³ (22 m³)
-Net Power - SAE J13492032 HP (1516 kW)
-NoteElectric drive option available (1400 kW) on 6040 AC/6040 AC FS
-Frequency50 Hz (60 Hz on request)
-Output1877 HP (1400 kW)
-Type (2)Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
-Type (3)Squirrel cage induction motor
-Voltage6.6 kV ±10% (other on request)
-Type (1)Power limit control by Pump Managing System
-Starting current350% of IN (197% of IN Optional)
-Rated Current IN156 A (at 6.6 kV)
-Revolutions1,500 min-1 (1,800 min-1 at 60 Hz)
-Gross Power - SAE J19952032 HP (1516 kW)
-Engine Model2 × Cat® C32
-Total Rated Net Power - SAE J13491516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
-All buckets (FS and BH) are equipped with a wear package consisting of: (1)- Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth
-Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
-Total Rated Net Power - ISO 3046/11516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
-Total Rated Gross Power - SAE J19951516 kW 1,750 min-1 (2,032 hp 1,750 min-1)
-Capacity - Grease Container264 gal (US) (1000 l)
-Stroke6.38 in (162 mm)
-Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)- Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance
-Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)- Constant boom momentum throughout the whole lift arc - Crowd force assistance
-Type (5)Welding procedures allow for internal counter-welding (double prep weld) wherever possible
-Type (6)Boom and sticks are stress-relieved after welding
-Type (7)Boom and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel casting at pivot areas
-Type (4)Catwalks with rails at boom (FS and BH)
-Type (3)Special wear packages for highly abrasive materials on request
-Type (1)Inspection hole in monoboom BH
-Type (2)Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
-Maximum Altitude - Without Deration - At 10° C Above Sea Level8200 ft (2500 m)
-Travel Speed - 1st Stage - Maximum0.93 mile/h (1.5 km/h)
-Oil Flow of Cooling Pumps - Diesel Version2 × 799 L/min (2 × 211 gal/min)
-Board Control System (BCS III) Features (1)USB, Lan (TCP/IP) and CAN BUS interfaces for data export
-Board Control System (BCS III) Features (2)On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram)
-Oil Flow of Cooling Pumps - AC Version4 × 379 L/min (4 × 100 gal/min)
-Features (3)Extremely high cooling efficiency to ensure optimum oil temperature
-Features (1)Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
-Features (2)Fan speed is thermostatically controlled
-Board Control System (BCS III) Features (3)Robust instrument panel including large (12 in) colored touch screen for intuitive handling
-Board Control System (BCS III) Features (4)Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems
-Components (10)External sun shields at side and rear windows
-Components (11)Sliding emergency ladder (kick-down type) with ladder cage
-Components (12)Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated
-Components (1)Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
-Board Control System (BCS III) Features (7)Fault memory with storage of related conditions
-Board Control System (BCS III) Features (5)On-screen troubleshooting assistance
-Board Control System (BCS III) Features (6)Graphic charts of logged data
-Diameter - Fan2 × 1524 mm (2 × 60 in)
-Components (2)Variable axial piston pumps supplying low-volume, high-pressure oil to fans
-Main Pumps - Maximum Oil Flow - AC Version4 × 746 L/min (4 × 197 gal/min)
-Main Pumps - Maximum Oil Flow - Diesel Version4 × 724 L/min (4 × 191 gal/min)
-Maximum Pressure - Attachment4350 psi (300 bar)
-Main Pumps - Diesel Version4 × variable swash plate pumps
-Main Pumps - AC Version4 × variable flow axial piston pumps
-Hydraulic Tank Capacity - AC Version - Approximately1057 gal (US) (4000 l)
-Hydraulic Tank Capacity - Diesel Version - Approximately898 gal (US) (3400 l)
-Maximum Pressure - Swing Pumps5080 psi (350 bar)
-Maximum Pressure - Travel5080 psi (350 bar)
-Total Volume of Hydraulic Oil - AC Version - Approximately1585 gal (US) (6400 l)
-Total Volume of Hydraulic Oil - Diesel Version - Approximately1532 gal (US) (5800 l)
-Components (1)Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers
-Swing Pumps - Maximum Oil Flow - Diesel Version4 × 321 L/min (4 × 85 gal/min)
-Swing Pumps - Maximum Oil Flow - AC Version3 × 491 L/min (3 × 130 gal/min)
-Swing Pumps - AC Version3 × reversible swash plate pump
-Swing Pumps - Diesel Version4 × reversible swash plate pump
-Components (13)Robust instrument panel including large colored BCS screen with transflective technology
-Components (2)Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
-Components (1)All running surfaces of sprockets, idlers, rollers and track links are hardened
-Components (2)Acoustic travel alarm
-Components (3)Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
-Bottom Rollers - Each Side7
-Swing RingTriple-race roller bearing with sealed internal gearing
-Parking BrakeWet multiple disc brake, spring-loaded/hydraulically released
-Swing Drive3 compact planetary transmissions with axial piston motors
-Components (4)All teeth contact areas of sprocket and pad links are hardened
-Components (5)Fully hydraulic self-adjusting track tensioning system with membrane accumulator
-Support Rollers - Each Side2 plus a skid plate in between
-Track Pads - Each Side42
-Travel Drives - Each Side1 planetary transmission with 2 two-stage axial piston motors
-Parking BrakeWet multiple disc brake, spring applied/hydraulically released
-Maximum Tractive Force471260 lb (2097 kN)
-Components (6)Automatic hydraulic retarder valve to prevent over-speed on downhill travel
-Gradeability - Travel Drives - Maximum57 % (57 %)
-Maximum Swing Speed - Diesel Version4.7 r/min (4.7 r/min)
-Maximum Swing Speed - AC Version5.1 r/min (5.1 r/min)
-Components (7)Under roof mounted heating ventilating and air conditioning system
-Components (8)Joystick controls integrated in independently adjustable seat consoles
-Components (9)Fold-away auxiliary seat with safety belt
-Components (6)FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure
-Components (5)All-round safety glass, armored windshield and sliding side window
-Components (3)Roller blinds at all windows
-Components (4)Windshield with parallel intermittent wiper/washer
-Internal Dimensions of Cab - Height7.05 ft (2150 mm)
-Internal Dimensions of Cab - Length7.22 ft (2200 mm)
-Features (3)Hydraulic braking of the swing motion by counteracting control
-Features (4)All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
-Features (2)Closed-loop swing circuit with torque control
-Features (1)Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
-Internal Dimensions of Cab - Width5.25 ft (1600 mm)
-Operator's Eye Level - Approximately22.31 ft (6.8 m)
-Travel Speed - 2nd Stage - Maximum1.55 mile/h (2.5 km/h)

Benefits and Features

Standard Equipment

Optional Equipment

  • CAB

Featured Used Equipment

View More
View More
View More
Call for Pricing
View More