SPECS SUMMARY

Base Power (1st Gear) - Net213 mm H2O (159 kg/mm)
Operating Weight - Typically Equipped45432 lb (20607 null)
Blade Width12 ft (3.7 m)
The M Series Motor Grader has become the industry standard in operational efficiency and overall productivity. From building roads to maintaining them, M Series Motor Graders are designed to help you get more work done in less time. Unprecedented operator comfort and ease of service help to maximize your return on investment.


Specifications

-Base Power (1st Gear) - Net213 mm H2O (159 kg/mm)
-Operating Weight - Typically Equipped45432 lb (20607 null)
-Blade Width12 ft (3.7 m)
-Engine ModelCat® C9 ACERT™
-Gross Vehicle Weight - Typically Equipped45432 lb (20607 null)
-Bore4.4 in (112 mm)
-Stroke5.9 in (149 mm)
-Top Speed - Forward29.5 mile/h (47.4 km/h)
-Top Speed - Reverse23.3 mile/h (37.4 km/h)
-Turning Radius - Outside Front Tires24.93 ft (7.6 m)
-Steering Range - Left/Right47.5 degrees
-Articulation Angle - Left/Right20 degrees
-Fuel Capacity110 gal (US) (416 l)
-Speed at Rated Power2,000 rpm
-Forward/Reverse Gears8 Forward/6 Reverse
-TransmissionDirect drive, power shift, countershaft
-Brakes - ServiceMultiple oil disc
-Brakes - Service - Surface Area3565 in² (23000 cm²)
-Circuit TypeElectro-hydraulic load sensing, closed center
-Pump TypeVariable piston
-Pump Output55.7 gal/min (210 l/min)
-Maximum System Pressure3500 psi (24150 kPa)
-Drawbar - Width3 in (76.2 mm)
-Standby Pressure450 psi (3100 kPa)
-Forward - 1st2.5 mile/h (4.1 km/h)
-Forward - 2nd3.5 mile/h (5.6 km/h)
-Forward - 3rd5 mile/h (8.1 km/h)
-Forward - 4th7 mile/h (11.2 km/h)
-Forward - 5th10.8 mile/h (17.4 km/h)
-Forward - 6th14.7 mile/h (23.7 km/h)
-Forward - 7th20.3 mile/h (32.6 km/h)
-Forward - 8th29.5 mile/h (47.4 km/h)
-Reverse - 1st2 mile/h (3.3 km/h)
-Reverse - 2nd3.8 mile/h (6.1 km/h)
-Reverse - 3rd5.5 mile/h (8.8 km/h)
-Reverse - 4th8.5 mile/h (13.7 km/h)
-Reverse - 5th16 mile/h (25.7 km/h)
-Reverse - 6th23.3 mile/h (37.4 km/h)
-Brakes - ParkingMultiple oil disc
-Brakes - SecondaryDual circuit control system
-Circle - Diameter61.1 in (1553 mm)
-Circle - Blade Beam Thickness1.6 in (40 mm)
-Drawbar - Height6 in (152 mm)
-Moldboard - Height24 in (610 mm)
-Moldboard - Thickness0.87 in (22 mm)
-Arc Radius16.3 in (413 mm)
-Throat Clearance3.7 in (95 mm)
-Cutting Edge Width6 in (152 mm)
-Cutting Edge Thickness0.6 in (16 mm)
-End Bit - Width6 in (152 mm)
-End Bit - Thickness0.6 in (16 mm)
-Blade Pull - Base GVW - AWD35344 lb (16032 null)
-Blade Pull - Maximum GVW - AWD47515 lb (21552 null)
-Circle Centershift - Right28.7 in (728 mm)
-Circle Centershift - Left27.4 in (695 mm)
-Moldboard Sideshift - Right37.4 in (950 mm)
-Moldboard Sideshift - Left32.3 in (820 mm)
-Maximum Blade Position Angle90 degrees
-Blade Tip Range - Forward40 degrees
-Blade Tip Range - Backward5 degrees
-Maximum Lift Above Ground17.8 in (452 mm)
-Maximum Depth of Cut29.5 in (750 mm)
-Cooling System10.6 gal (US) (40 l)
-Hydraulic System - Tank16.9 gal (US) (64 l)
-Gear - Forward 1st213 mm H2O (159 kg/mm)
-SoundISO 6394:2008, ISO 6395:2008
-SteeringISO 5010:2007
-Gear - Forward 4th228 mm H2O (170 kg/mm)
-Gear - Forward 3rd223 mm H2O (166 kg/mm)
-Gear - Forward 2nd218 mm H2O (162 kg/mm)
-ROPS/FOPSISO 3471:1994, ISO 3449:1992
-BrakesISO 3450:1996
-Gross Vehicle Weight - Maximum - Total52794 lb (23947 null)
-Gross Vehicle Weight - Typically Equipped - Front Axle13455 lb (6103 null)
-Gross Vehicle Weight - Maximum - Rear Axle35900 lb (16284 null)
-Gross Vehicle Weight - Maximum - Front Axle16894 lb (7663 null)
-Gross Vehicle Weight - Base - Rear Axle28278 lb (12827 null)
-Gross Vehicle Weight - Base - Total39271 lb (17813 null)
-Gross Vehicle Weight - Typically Equipped - Rear Axle31976 lb (14504 null)
-Gross Vehicle Weight - Typically Equipped - Total45432 lb (20607 null)
-Width - Outside Front Tires - AWD102.1 in (2594 mm)
-Width - Tire Center Lines Front - AWD87.5 in (2223 mm)
-Length - Push Plate to Ripper Retracted386.5 in (9818 mm)
-Length - Push Plate to Ripper399.1 in (10136 mm)
-Height - Exhaust Stack - AWD128.2 in (3256 mm)
-Height - Top of Cab Product Link133 in (3378 mm)
-Gear - Forward 5th233 mm H2O (174 kg/mm)
-Gear - Forward 7th243 mm H2O (181 kg/mm)
-Gear - Forward 3rd243 mm H2O (181 kg/mm)
-Gear - Forward 4th248 mm H2O (185 kg/mm)
-Gear - Forward 2nd238 mm H2O (177 kg/mm)
-Gear - Forward 1st223 mm H2O (166 kg/mm)
-Gear - Reverse 2nd218 mm H2O (162 kg/mm)
-Gear - Reverse 3rd-6th223 mm H2O (166 kg/mm)
-Gear - Forward 5th268 mm H2O (200 kg/mm)
-Gear - Forward 6th268 mm H2O (200 kg/mm)
-Gear - Reverse 2nd218 mm H2O (162 kg/mm)
-Gear - Reverse 3rd-6th223 mm H2O (166 kg/mm)
-Gear - Reverse 1st213 mm H2O (159 kg/mm)
-Gear - Forward 8th268 mm H2O (200 kg/mm)
-Gear - Forward 7th268 mm H2O (200 kg/mm)
-Gear - Reverse 1st213 mm H2O (159 kg/mm)
-Gear - Forward 8th248 mm H2O (185 kg/mm)
-Gear - Reverse 2nd218 mm H2O (162 kg/mm)
-Gear - Reverse 3rd-6th223 mm H2O (166 kg/mm)
-Gear - Reverse 1st213 mm H2O (159 kg/mm)
-Gear - Forward 8th248 mm H2O (185 kg/mm)
-Gross Vehicle Weight - Base - Front Axle10992 lb (4986 null)
-Gear - Forward 1st213 mm H2O (159 kg/mm)
-Gear - Forward 2nd218 mm H2O (162 kg/mm)
-Gear - Forward 6th238 mm H2O (177 kg/mm)
-Gear - Forward 7th243 mm H2O (181 kg/mm)
-Gear - Forward 5th233 mm H2O (174 kg/mm)
-Gear - Forward 4th228 mm H2O (170 kg/mm)
-Gear - Forward 3rd223 mm H2O (166 kg/mm)
-Gear - Forward 6th238 mm H2O (177 kg/mm)
-EmissionsEngine is Certified for Environment Canada Tier 3 Standards
-VHP Plus Range - Net159-200 kW (213-268 hp)
-Moldboard - Width12 ft (3.7 m)
-Torque Rise - VHP Plus40%
-Maximum Shoulder Reach Outside of Tires - Right89.7 in (2278 mm)
-Ripper Shank Holder Spacing21 in (533 mm)
-Down Pressure - Maximum GVW - AWD28998 lb (13153 null)
-Down Pressure - Base GVW - AWD18868 lb (8558 null)
-Front Frame Structure - Height12 in (305 mm)
-Circle - Height6.3 in (160 mm)
-Front Frame Structure - Thickness0.6 in (16 mm)
-Front Frame Structure - Width12 in (305 mm)
-Transmission - Differential - Final Drives17.2 gal (US) (65 l)
-Ripping Depth - Maximum16.8 in (428 mm)
-Maximum Shoulder Reach Outside of Tires - Left82.3 in (2090 mm)
-Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum18.4 in (467 mm)
-Rear - Scarifying Depth, Maximum10.5 in (266 mm)
-Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders5/11
-Mid, V-Type - Scarifying Depth, Maximum11.5 in (292 mm)
-Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing4.6 in (116 mm)
-Mid, V-Type - Working Width46.6 in (1184 mm)
-Maximum Torque - AWD On991 lb/ft (1344 N·m)
-Front, V-Type, 5 or 11 Tooth - Working Width47.4 in (1205 mm)
-Mid, V-Type - Scarifier Shank Holders11
-Mid, V-Type - Scarifier Shank Holder Spacing4.6 in (116 mm)
-Displacement537 in³ (8.8 l)
-Ripper Shank Holders5
-Penetration Force20540 lb (9317 null)
-Pry-Out Force26259 lb (11911 null)
-Machine Length Increase, Beam Raised39.2 in (995 mm)
-Rear - Working Width91 in (2300 mm)
-Rear - Scarifier Shank Holders9
-Rear - Scarifier Shank Holder Spacing10.5 in (267 mm)
-Front Axle - Height to Center22.5 in (571 mm)
-Front Axle - Wheel Lean - Left/Right18 degrees
-Front Axle - Total Oscillation per Side32 degrees
-Number of Cylinders6
-Derating Altitude10000 ft (3048 m)
-High Ambient - Fan Speed - Maximum1,650 rpm
-High Ambient - Fan Speed - Minimum600 rpm
-High - Ambient Capability122 °F (50 °C)
-Height22.5 in (572 mm)
-Width8 in (204 mm)
-Sidewall Thickness - Inner1 in (25 mm)
-Sidewall Thickness - Outer0.7 in (18 mm)
-Drive Chain Pitch2 in (50.8 mm)
-Wheel Axle Spacing60 in (1523 mm)
-Tandem Oscillation - Front Up15 degrees
-Tandem Oscillation - Front Down25 degrees
-Height - Top of Cab130.2 in (3308 mm)
-Length - Front Axle to Mid Tandem241.1 in (6123 mm)
-Length - Front Tire to Rear of Machine344.6 in (8754 mm)
-Length - Front Axle to Moldboard100.5 in (2552 mm)
-Length - Between Tandem Axles60 in (1523 mm)
-Width - Outside Rear Tires98.9 in (2511 mm)
-Height - Front Axle Center23.5 in (596 mm)
-Height - Top of Cylinders119.7 in (3040 mm)
-Ground Clearance - Rear Axle13.3 in (339 mm)
-Engine Oil7.9 gal (US) (30 l)
-Tandem Housing - Each21.1 gal (US) (80 l)
-Front Wheel Spindle Bearing Housing0.13 gal (US) (0.5 l)
-Circle Drive Housing1.8 gal (US) (7 l)

Benefits and Features

Standard Equipment

  • POWER TRAIN
  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • FLUIDS
  • TIRES, RIMS AND WHEELS
  • OTHER STANDARD EQUIPMENT

Optional Equipment

  • ELECTRICAL
  • GUARDS
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER ATTACHMENTS
  • WORK TOOLS/GROUND ENGAGING TOOLS
  • MACHINE ARRANGEMENTS
  • OPTIONAL TIRE ARRANGEMENTS

Featured Used Equipment

140M2
$315,000
View More
236D
$36,000
View More
938M
$180,000
View More
304ECR
$47,500
View More