SPECS SUMMARY

Base Power (1st Gear) - Net221 HP (165 kW)
Operating Weight - Typically Equipped47514 lb (21552 kg)
Blade Width14 ft (4.2 m)
160M3 AWD not only excels at heavier jobs - it also gives you the extra traction you need to work in the toughest ground conditions like mud, gravel or snow. The All Wheel Drive models offer a steering compensation system that gives you a “power turn” for better turning performance in poor underfoot conditions.


Specifications

-Base Power (1st Gear) - Net221 HP (165 kW)
-Operating Weight - Typically Equipped47514 lb (21552 kg)
-Blade Width14 ft (4.2 m)
-Engine ModelCat® C9.3 ACERT™
-Bore4.5 in (115 mm)
-Stroke5.9 in (149 mm)
-Top Speed - Forward29.5 mile/h (47.4 km/h)
-Top Speed - Reverse23.3 mile/h (37.4 km/h)
-Turning Radius - Outside Front Tires25.59 ft (7.8 m)
-Steering Range - Left/Right50°
-Articulation Angle - Left/Right20°
-Fuel Capacity104 gal (US) (394 l)
-Speed at Rated Power2,000 rpm
-Forward/Reverse Gears8 Forward/6 Reverse
-TransmissionAPECS, Direct Drive, Powershift
-Brakes - ServiceMultiple Oil Disc
-Brakes - Service - Surface Area3565 in² (23000 cm²)
-Circuit TypeParallel
-Pump TypeVariable Piston
-Pump Output55.5 gal/min (210 l/min)
-Maximum System Pressure3503 psi (24150 kPa)
-Reservoir Tank Capacity16.9 gal (US) (64 l)
-Standby Pressure885 psi (6100 kPa)
-Drawbar - Width3 in (76.2 mm)
-Forward - 1st2.6 mile/h (4.1 km/h)
-Forward - 2nd3.5 mile/h (5.6 km/h)
-Forward - 3rd5.1 mile/h (8.1 km/h)
-Forward - 4th7 mile/h (11.2 km/h)
-Forward - 5th10.8 mile/h (17.4 km/h)
-Forward - 6th14.7 mile/h (23.7 km/h)
-Forward - 7th20.3 mile/h (32.6 km/h)
-Forward - 8th29.5 mile/h (47.4 km/h)
-Reverse - 1st2 mile/h (3.3 km/h)
-Reverse - 2nd3.8 mile/h (6.1 km/h)
-Reverse - 3rd5.5 mile/h (8.8 km/h)
-Reverse - 4th8.5 mile/h (13.7 km/h)
-Reverse - 5th16 mile/h (25.7 km/h)
-Reverse - 6th23.3 mile/h (37.4 km/h)
-Brakes - ParkingMultiple Oil Disc
-Brakes - SecondaryDual Circuit Control
-Circle - Diameter61.1 in (1553 mm)
-Circle - Blade Beam Thickness1.6 in (40 mm)
-Drawbar - Height6 in (152 mm)
-Moldboard - Height24 in (610 mm)
-Moldboard - Thickness0.87 in (22 mm)
-Arc Radius16.3 in (413 mm)
-Throat Clearance6.5 in (166 mm)
-Cutting Edge Width6 in (152 mm)
-Cutting Edge Thickness0.6 in (16 mm)
-End Bit - Width6 in (152 mm)
-End Bit - Thickness0.6 in (16 mm)
-Blade Pull - Base GVW - AWD36817 lb (16700 kg)
-Blade Pull - Maximum GVW - AWD49630 lb (22512 kg)
-Circle Centershift - Right28.7 in (728 mm)
-Circle Centershift - Left27.4 in (695 mm)
-Moldboard Sideshift - Right26 in (660 mm)
-Moldboard Sideshift - Left20.1 in (510 mm)
-Maximum Blade Position Angle90°
-Blade Tip Range - Forward40°
-Blade Tip Range - Backward
-Maximum Lift Above Ground17.8 in (452 mm)
-Maximum Depth of Cut29.5 in (750 mm)
-Cooling System15 gal (US) (57 l)
-Hydraulic System - Total26.4 gal (US) (100 l)
-Hydraulic System - Tank16.9 gal (US) (64 l)
-Gross Vehicle Weight - Base - Front Axle11033 lb (5004 kg)
-Gross Vehicle Weight - Base - Rear Axle29875 lb (13551 kg)
-Rear - Scarifying Depth, Maximum16.8 in (426 mm)
-Mid, V-Type - Working Width46.6 in (1184 mm)
-Mid, V-Type - Scarifying Depth, Maximum11.5 in (292 mm)
-Gross Vehicle Weight - Base - Total40908 lb (18555 kg)
-Gross Vehicle Weight - Maximum - Front Axle17075 lb (7745 kg)
-Operating Weight - Typically Equipped - Total47514 lb (21552 kg)
-Operating Weight - Typically Equipped - Front Axle14289 lb (6481 kg)
-Operating Weight - Typically Equipped - Rear Axle33225 lb (15071 kg)
-Mid, V-Type - Scarifier Shank Holders11
-Gross Vehicle Weight - Maximum - Rear Axle38069 lb (17268 kg)
-Gross Vehicle Weight - Maximum - Total55144 lb (25013 kg)
-Maximum Shoulder Reach Outside of Tires - Right89.7 in (2278 mm)
-Blade Down Pressure - Maximum GVW - AWD29308 lb (13294 kg)
-Moldboard - Blade Width14 ft (4.2 m)
-Maximum Shoulder Reach Outside of Tires - Left82.3 in (2090 mm)
-Blade Down Pressure - Base GVW - AWD18935 lb (8589 kg)
-Circle - Height6.3 in (160 mm)
-Front Frame Structure - Width12 in (305 mm)
-Front Frame Structure - Height12.6 in (321 mm)
-SoundISO 6394; ISO 6395
-Ripper Shank Holder Spacing21 in (533 mm)
-Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum18.4 in (467 mm)
-Front, V-Type, 5 or 11 Tooth - Working Width40.6 in (1031 mm)
-Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders5/11
-Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing4.6 in (116 mm)
-Ripping Depth - Maximum16.8 in (426 mm)
-Front, V-Type - Working Width47.4 in (1205 mm)
-Mid, V-Type - Scarifier Shank Holder Spacing4.6 in (116 mm)
-Transmission - Differential - Final Drives18.5 gal (US) (70 l)
-AWD On: Gear - Net Power - Reverse - 3rd-6th241 HP (180 kW)
-AWD Range - Net172-219 kW (231-293 hp)
-AWD Range - Net - Metric172-219 kW (234-298 hp)
-AWD On: Gear - Net Power - Reverse - 2nd231 HP (172 kW)
-AWD On: Gear - Net Power - Reverse - 1st221 HP (165 kW)
-AWD On: Gear - Net Power - Forward - 7th293 HP (219 kW)
-AWD On: Gear - Net Power - Forward - 8th293 HP (219 kW)
-SteeringISO 5010
-EmissionsU.S. EPA Tier 4 Final/EU Stage IV
-Torque Rise39%
-VHP Plus - Gear - Net Power - Forward 1st221 HP (165 kW)
-VHP Plus - Gear - Net Power - Forward 2nd231 HP (172 kW)
-Standard Capability109 °F (43 °C)
-Maximum Torque - VHP Plus1000 lb/ft (1355 N·m)
-High Ambient - Fan Speed - Standard1,400 rpm
-Maximum Torque - AWD On1079 lb/ft (1464 N·m)
-AWD On: Gear - Net Power - Forward - 6th293 HP (219 kW)
-AWD On: Gear - Net Power - Forward - 5th293 HP (219 kW)
-AWD Off: Gear - Net Power - Forward - 5th262 HP (195 kW)
-AWD Off: Gear - Net Power - Forward - 6th267 HP (199 kW)
-AWD Off: Gear - Net Power - Forward - 7th272 HP (203 kW)
-AWD Off: Gear - Net Power - Forward - 4th257 HP (191 kW)
-AWD Off: Gear - Net Power - Forward - 3rd252 HP (188 kW)
-AWD Off: Gear - Net Power - Forward - 1st231 HP (172 kW)
-AWD Off: Gear - Net Power - Forward - 2nd241 HP (180 kW)
-AWD Off: Gear - Net Power - Forward - 8th272 HP (203 kW)
-AWD Off: Gear - Net Power - Reverse - 1st221 HP (165 kW)
-AWD On: Gear - Net Power - Forward - 3rd267 HP (199 kW)
-AWD On: Gear - Net Power - Forward - 4th272 HP (203 kW)
-AWD On: Gear - Net Power - Forward - 2nd262 HP (195 kW)
-AWD On: Gear - Net Power - Forward - 1st241 HP (180 kW)
-AWD Off: Gear - Net Power - Reverse - 2nd231 HP (172 kW)
-AWD Off: Gear - Net Power - Reverse - 3rd-6th241 HP (180 kW)
-VHP Plus - Gear - Net Power - Forward 3rd241 HP (180 kW)
-Base Power (1st Gear) - Net - Metric224 HP (165 kW)
-VHP Plus Range - Net - Metric165-203 kW (224-276 hp)
-VHP Plus Range - Net165-203 kW (221-272 hp)
-ROPS/FOPSISO 3471; ISO 3499
-VHP Plus - Gear - Net Power - Forward 4th252 HP (188 kW)
-Diesel Exhaust Fluid5.8 gal (US) (22 l)
-VHP Plus - Gear - Net Power - Reverse 3rd-6th241 HP (180 kW)
-BrakesISO 3450
-VHP Plus - Gear - Net Power - Forward 6th262 HP (195 kW)
-VHP Plus - Gear - Net Power - Reverse 2nd231 HP (172 kW)
-VHP Plus - Gear - Net Power - Forward 5th257 HP (191 kW)
-VHP Plus - Gear - Net Power - Forward 7th267 HP (199 kW)
-VHP Plus - Gear - Net Power - Forward 8th272 HP (203 kW)
-VHP Plus - Gear - Net Power - Reverse 1st221 HP (165 kW)
-Ripper Shank Holders5
-Displacement567.5 in³ (9.3 l)
-Drawbar - Thickness0.5 in (12.7 mm)
-Penetration Force20812 lb (9440 kg)
-Pry-Out Force28493 lb (12924 kg)
-Machine Length Increase, Beam Raised40.6 in (1031 mm)
-Rear - Working Width84 in (2133 mm)
-Rear - Scarifier Shank Holders9
-Rear - Scarifier Shank Holder Spacing10.5 in (267 mm)
-Front-Top/Bottom Plate - Width12 in (305 mm)
-Front-Top/Bottom Plate - Thickness0.87 in (22 mm)
-Front Axle - Height to Center23.5 in (596 mm)
-Front Axle - Wheel Lean - Left/Right18°
-Front Axle - Total Oscillation per Side32°
-Number of Cylinders6
-Derating Altitude10000 ft (3050 m)
-High Ambient - Fan Speed - Maximum1,550 rpm
-High Ambient - Fan Speed - Minimum500 rpm
-High - Ambient Capability122 °F (50 °C)
-Height22.5 in (572 mm)
-Width8 in (204 mm)
-Sidewall Thickness - Inner0.69 in (17.5 mm)
-Sidewall Thickness - Outer0.71 in (18 mm)
-Drive Chain Pitch2 in (50.8 mm)
-Wheel Axle Spacing60 in (1523 mm)
-Tandem Oscillation - Front Up15°
-Tandem Oscillation - Front Down25°
-Height - Top of Cab130 in (3308 mm)
-Length - Counterweight to Ripper399 in (10136 mm)
-Width - Outside Front Tires98.9 in (2511 mm)
-Length - Front Axle to Mid Tandem241 in (6123 mm)
-Length - Front Tire to Rear of Machine351 in (8912 mm)
-Length - Front Axle to Moldboard100 in (2552 mm)
-Length - Between Tandem Axles60 in (1523 mm)
-Width - Outside Rear Tires98.9 in (2511 mm)
-Width - Tire Center Lines84.3 in (2140 mm)
-Height - Front Axle Center23.5 in (596 mm)
-Height - Exhaust Stack128 in (3256 mm)
-Height - Top of Cylinders120 in (3040 mm)
-Ground Clearance - Rear Axle13.3 in (339 mm)
-Engine Oil7.9 gal (US) (30 l)
-Tandem Housing - Each22.9 gal (US) (87 l)
-Front Wheel Spindle Bearing Housing0.13 gal (US) (0.5 l)
-Circle Drive Housing1.8 gal (US) (7 l)

Benefits and Features

Standard Equipment

  • POWER TRAIN
  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • FLUIDS
  • TIRES, RIMS AND WHEELS
  • OTHER STANDARD EQUIPMENT

Optional Equipment

  • ELECTRICAL
  • GUARDS
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER ATTACHMENTS
  • WORK TOOLS/G.E.T.
  • MACHINE ARRANGEMENTS
  • OPTIONAL TIRE ARRANGEMENTS

Featured Used Equipment

279 D
$45,000
View More
236D
$36,000
View More
CP56B
$155,000
View More
950K
$225,000
View More
938M
$180,000
View More