SPECS SUMMARY

Base Power (1st Gear) - Net221 HP (165 kW)
Operating Weight - Typically Equipped45547 lb (20660 kg)
Blade Width14 ft (4.2 m)
The powerful 160M3 has what it takes for heavy jobs like site preparation, road building and maintenance and heavier snow removal. Fuel efficiency and the ability to put power to the ground help make you more productive in the toughest applications.


Specifications

-Base Power (1st Gear) - Net221 HP (165 kW)
-Operating Weight - Typically Equipped45547 lb (20660 kg)
-Blade Width14 ft (4.2 m)
-Engine ModelCat® C9.3 ACERT™
-Gross Vehicle Weight - Maximum - Rear Axle38069 lb (17268 kg)
-Gross Vehicle Weight - Base - Front Axle9907 lb (4494 kg)
-Gross Vehicle Weight - Base - Rear Axle28812 lb (13069 kg)
-Gross Vehicle Weight - Maximum - Total55144 lb (25013 kg)
-Bore4.5 in (115 mm)
-Stroke5.9 in (149 mm)
-Top Speed - Forward29.5 mile/h (47.4 km/h)
-Top Speed - Reverse23.3 mile/h (37.4 km/h)
-Turning Radius - Outside Front Tires25.59 ft (7.8 m)
-Steering Range - Left/Right50°
-Articulation Angle - Left/Right20°
-Fuel Capacity104 gal (US) (394 l)
-Speed at Rated Power2,000 rpm
-Forward/Reverse Gears8 Forward/6 Reverse
-TransmissionAPECS, Direct Drive, Powershift
-Brakes - ServiceMultiple Oil Disc
-Brakes - Service - Surface Area3565 in² (23000 cm²)
-Circuit TypeParallel
-Pump TypeVariable Piston
-Pump Output55.5 gal/min (210 l/min)
-Maximum System Pressure3503 psi (24150 kPa)
-Reservoir Tank Capacity16.9 gal (US) (64 l)
-Standby Pressure885 psi (6100 kPa)
-Drawbar - Width3 in (76.2 mm)
-Forward - 1st2.6 mile/h (4.1 km/h)
-Forward - 2nd3.5 mile/h (5.6 km/h)
-Forward - 3rd5.1 mile/h (8.1 km/h)
-Forward - 4th7 mile/h (11.2 km/h)
-Forward - 5th10.8 mile/h (17.4 km/h)
-Forward - 6th14.7 mile/h (23.7 km/h)
-Forward - 7th20.3 mile/h (32.6 km/h)
-Forward - 8th29.5 mile/h (47.4 km/h)
-Reverse - 1st2 mile/h (3.3 km/h)
-Reverse - 2nd3.8 mile/h (6.1 km/h)
-Reverse - 3rd5.5 mile/h (8.8 km/h)
-Reverse - 4th8.5 mile/h (13.7 km/h)
-Reverse - 5th16 mile/h (25.7 km/h)
-Reverse - 6th23.3 mile/h (37.4 km/h)
-Brakes - ParkingMultiple Oil Disc
-Brakes - SecondaryDual Circuit Control
-Circle - Diameter61.1 in (1553 mm)
-Circle - Blade Beam Thickness1.6 in (40 mm)
-Drawbar - Height6 in (152 mm)
-Moldboard - Height24 in (610 mm)
-Moldboard - Thickness0.87 in (22 mm)
-Arc Radius16.3 in (413 mm)
-Throat Clearance6.5 in (166 mm)
-Cutting Edge Width6 in (152 mm)
-Cutting Edge Thickness0.6 in (16 mm)
-End Bit - Width6 in (152 mm)
-End Bit - Thickness0.6 in (16 mm)
-Blade Pull - Base GVW25931 lb (11762 kg)
-Blade Pull - Maximum GVW34262 lb (15541 kg)
-Circle Centershift - Right28.7 in (728 mm)
-Blade Down Pressure - Base GVW17004 lb (7713 kg)
-Circle Centershift - Left27.4 in (695 mm)
-Blade Down Pressure - Maximum GVW29308 lb (13294 kg)
-Moldboard Sideshift - Right26 in (660 mm)
-Moldboard Sideshift - Left20.1 in (510 mm)
-Maximum Blade Position Angle90°
-Blade Tip Range - Forward40°
-Blade Tip Range - Backward
-Maximum Lift Above Ground17.8 in (452 mm)
-Maximum Depth of Cut29.5 in (750 mm)
-Cooling System15 gal (US) (57 l)
-Hydraulic System - Total26.4 gal (US) (100 l)
-Hydraulic System - Tank16.9 gal (US) (64 l)
-Front, V-Type - Working Width47.4 in (1205 mm)
-Mid, V-Type - Scarifying Depth, Maximum11.5 in (292 mm)
-Mid, V-Type - Scarifier Shank Holder Spacing4.6 in (116 mm)
-Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum18.4 in (467 mm)
-Front, V-Type, 5 or 11 Tooth - Working Width40.6 in (1031 mm)
-Rear - Scarifying Depth, Maximum16.8 in (426 mm)
-Mid, V-Type - Scarifier Shank Holders11
-Ripper Shank Holder Spacing21 in (533 mm)
-Maximum Shoulder Reach Outside of Tires - Left82.3 in (2090 mm)
-Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders5/11
-Maximum Shoulder Reach Outside of Tires - Right89.7 in (2278 mm)
-Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing4.6 in (116 mm)
-Moldboard - Blade Width14 ft (4.2 m)
-Ripping Depth - Maximum16.8 in (426 mm)
-Diesel Exhaust Fluid5.8 gal (US) (22 l)
-VHP Plus - Gear - Net Power - Forward 8th272 HP (203 kW)
-VHP Plus - Gear - Net Power - Forward 7th267 HP (199 kW)
-VHP Plus - Gear - Net Power - Forward 6th262 HP (195 kW)
-VHP Plus - Gear - Net Power - Forward 5th257 HP (191 kW)
-VHP Plus - Gear - Net Power - Reverse 1st221 HP (165 kW)
-VHP Plus - Gear - Net Power - Reverse 2nd231 HP (172 kW)
-Gross Vehicle Weight - Base - Total38719 lb (17563 kg)
-VHP Plus Range - Net165-203 kW (221-272 hp)
-VHP Plus - Gear - Net Power - Reverse 3rd-6th241 HP (180 kW)
-VHP Plus - Gear - Net Power - Forward 4th252 HP (188 kW)
-VHP Plus - Gear - Net Power - Forward 3rd241 HP (180 kW)
-High Ambient - Fan Speed - Standard1,400 rpm
-EmissionsU.S. EPA Tier 4 Final/EU Stage IV
-Base Power (1st Gear) - Net - Metric224 HP (165 kW)
-Maximum Torque - VHP Plus1000 lb/ft (1355 N·m)
-Standard Capability109 °F (43 °C)
-VHP Plus - Gear - Net Power - Forward 2nd231 HP (172 kW)
-VHP Plus - Gear - Net Power - Forward 1st221 HP (165 kW)
-Torque Rise39%
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-VHP Plus Range - Net - Metric165-203 kW (224-276 hp)
-Operating Weight - Typically Equipped - Front Axle13237 lb (6004 kg)
-Operating Weight - Typically Equipped - Rear Axle32310 lb (14656 kg)
-Gross Vehicle Weight - Maximum - Front Axle17075 lb (7745 kg)
-Front Frame Structure - Height12.6 in (321 mm)
-Front Frame Structure - Width12 in (305 mm)
-Operating Weight - Typically Equipped - Total45547 lb (20660 kg)
-Circle - Height6.3 in (160 mm)
-SteeringISO 5010
-SoundISO 6394; ISO 6395
-ROPS/FOPSISO 3471; ISO 3499
-BrakesISO 3450
-Mid, V-Type - Working Width46.6 in (1184 mm)
-Transmission - Differential - Final Drives18.5 gal (US) (70 l)
-Ripper Shank Holders5
-Displacement567.5 in³ (9.3 l)
-Drawbar - Thickness0.5 in (12.7 mm)
-Penetration Force20812 lb (9440 kg)
-Pry-Out Force28493 lb (12924 kg)
-Machine Length Increase, Beam Raised40.6 in (1031 mm)
-Rear - Working Width84 in (2133 mm)
-Rear - Scarifier Shank Holders9
-Rear - Scarifier Shank Holder Spacing10.5 in (267 mm)
-Front-Top/Bottom Plate - Width12 in (305 mm)
-Front-Top/Bottom Plate - Thickness0.87 in (22 mm)
-Front Axle - Height to Center23.5 in (596 mm)
-Front Axle - Wheel Lean - Left/Right18°
-Front Axle - Total Oscillation per Side32°
-Number of Cylinders6
-Derating Altitude10000 ft (3050 m)
-High Ambient - Fan Speed - Maximum1,550 rpm
-High Ambient - Fan Speed - Minimum500 rpm
-High - Ambient Capability122 °F (50 °C)
-Height22.5 in (572 mm)
-Width8 in (204 mm)
-Sidewall Thickness - Inner0.69 in (17.5 mm)
-Sidewall Thickness - Outer0.71 in (18 mm)
-Drive Chain Pitch2 in (50.8 mm)
-Wheel Axle Spacing60 in (1523 mm)
-Tandem Oscillation - Front Up15°
-Tandem Oscillation - Front Down25°
-Height - Top of Cab130 in (3308 mm)
-Length - Counterweight to Ripper399 in (10136 mm)
-Width - Outside Front Tires98.9 in (2511 mm)
-Length - Front Axle to Mid Tandem241 in (6123 mm)
-Length - Front Tire to Rear of Machine351 in (8912 mm)
-Length - Front Axle to Moldboard100 in (2552 mm)
-Length - Between Tandem Axles60 in (1523 mm)
-Width - Outside Rear Tires98.9 in (2511 mm)
-Width - Tire Center Lines84.3 in (2140 mm)
-Height - Front Axle Center23.5 in (596 mm)
-Height - Exhaust Stack128 in (3256 mm)
-Height - Top of Cylinders120 in (3040 mm)
-Ground Clearance - Rear Axle13.3 in (339 mm)
-Engine Oil7.9 gal (US) (30 l)
-Tandem Housing - Each22.9 gal (US) (87 l)
-Front Wheel Spindle Bearing Housing0.13 gal (US) (0.5 l)
-Circle Drive Housing1.8 gal (US) (7 l)

Benefits and Features

Standard Equipment

  • POWER TRAIN
  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • FLUIDS
  • TIRES, RIMS AND WHEELS
  • OTHER STANDARD EQUIPMENT

Optional Equipment

  • ELECTRICAL
  • GUARDS
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER ATTACHMENTS
  • WORK TOOLS/G.E.T.
  • MACHINE ARRANGEMENTS
  • OPTIONAL TIRE ARRANGEMENTS

Featured Used Equipment

140HNA
$75,000
View More
140HNA
$110,000
View More
246C
$46,000
View More
930M
$160,000
View More
938K
$120,000
View More