Request Info


Nominal Payload Class (100%)70.5 ton (US) (64 t)
Engine ModelCat® C27
Top Speed - Loaded41.6 mile/h (66.9 km/h)
Rated Engine Speed1800 r/min (1800 r/min)
Having a solid track record in the quarry and aggregates industry, Cat’s 775G has been designed and manufactured using the latest quality control technologies—both virtually and hands on—to ensure your Off-Highway Truck is ready to do work. Built with a Cat C27 diesel engine, the 775G has improved fuel efficiency and delivers an additional 5% horsepower. Our 775G is a great pass match for the Cat 988K or 990K Wheel Loader, too. By having the Cat G Series trucks in your haul fleets, you can be more productive, spend less time on maintenance, and support the environment with new levels of eco performance. Which ultimately allows you to make a positive impact within your business and community every day.


Nominal Payload Class (100%)70.5 ton (US) (64 t)
Engine ModelCat® C27
Top Speed - Loaded41.6 mile/h (66.9 km/h)
Rated Engine Speed1800 r/min (1800 r/min)
Gross Power - SAE J1995825 HP (615 kW)
Net Power - SAE J1349768 HP (572 kW)
Net Power - ISO 9249775 HP (578 kW)
Net Power - 80/1269/EEC775 HP (578 kW)
Bore5.4 in (137 mm)
Stroke6 in (152 mm)
Displacement1648 in³ (27 l)
Struck42.7 yd³ (32.6 m³)
Struck42.2 yd³ (32.3 m³)
Front Axle - Empty50 % (50 %)
Front Axle - Loaded34 % (34 %)
Rear Axle - Empty50 % (50 %)
Rear Axle - Loaded66 % (66 %)
Forward - 16.6 mile/h (10.6 km/h)
Forward - 29.3 mile/h (15 km/h)
Forward - 312.6 mile/h (20.3 km/h)
Forward - 416.8 mile/h (27 km/h)
Forward - 522.8 mile/h (36.7 km/h)
Forward - 630.7 mile/h (49.4 km/h)
Forward - 741.6 mile/h (66.9 km/h)
Reverse8.7 mile/h (14 km/h)
Differential Ratio3.64:1
Planetary Ratio4.80:1
Total Reduction Ratio17.49:1
Brake Surface - Front257 in² (655 cm²)
Brake Surface - Rear9497 in² (61269 cm²)
Brake StandardsISO 3450:2011
Fuel Tank210 gal (US) (795 l)
Cooling System45 gal (US) (171 l)
Differential - Final Drives38 gal (US) (145 l)
Steering Tank9.5 gal (US) (36 l)
Steering System - Including Tank14 gal (US) (54 l)
Pump Flow - High Idle118 gal/min (448 l/min)
Relief Valve Setting - Raise2502 psi (17250 kPa)
Relief Valve Setting - Lower500 psi (3450 kPa)
Body Raise Time - High Idle10 s (10 s)
Body Lower Time - Float14 s (14 s)
Body Power Down - High Idle14 s (14 s)
NoteMaximum travel speeds with standard 24.00R35 (E4) tires.
Brake/Hoist Hydraulic Tank46.5 gal (US) (176 l)
Net Torque3148 ft-lb (4269 N·m)
Engine Power - ISO 14396812 HP (605.2 kW)
Torque Converter - Transmission System - HRC18 gal (US) (70 l)
Brake Hoist System85 gal (US) (322 l)
Crankcase24 gal (US) (90 l)
Torque Converter - Transmission System - LRC16 gal (US) (61 l)
ROPS StandardsRollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
Note (1)Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2)Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Note (2)Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
FOPS StandardsFalling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
Sound Standards (2)The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).
Sound Standards (1)The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Sound Standards (3)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Turning Diameter - Front77.1 ft (23.5 m)
EmissionsMeets EU Stage V emission standards.
Rear axle - Oscillation8.1°
Peak Torque - Speed1200 r/min (1200 r/min)
Note (1)Contact your local Cat dealer for body recommendation.
Target Payload (100%)70.5 ton (US) (64 t)
Maximum Working Payload (110%)77.5 ton (US) (70.3 t)
Body Capacity - SAE 2:155.23 yd³ (42.23 m³)
Note (1)Contact your local Cat dealer for body recommendation.
Heaped (SAE 2:1)*55.5 yd³ (42.2 m³)
Note (2)*ISO 6483:1980
Note (2)* Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
Maximum Allowable Payload (120%)*84.6 ton (US) (76.7 t)
Heaped (SAE 2:1)*55.2 yd³ (42.2 m³)
Note (2)*ISO 6483:1980
Note (1)Capacity with Dual Slope body – no liner.
Maximum Gross Vehicle Weight246503 lb (111812 kg)
Note (1)Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.
Note (3)No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.
Empty Loaded Cylinder Stroke Rear5.8 in (149 mm)
Empty Loaded Cylinder Stroke Front9.2 in (234 mm)
Standard Tire24.00R35 (E4)
Steering StandardsISO 5010:2007
Steer Angle31 ° (31 °)
Turning Circle - Clearance Diameter85.6 ft (26.1 m)

Benefits and Features

Operator Confidence

  • Ergonomics that put controls within reach
  • New braking performance and design
  • Engine braking option for Automatic Retarding Control (ARC)
  • Improved retarder lever ergonomics and activation
  • Mirror options including heated and concave
  • Seating that adjusts to individual needs with suspension and three-point harness
  • Seating for trainer or folds up for additional work space
  • In-cab fluid level monitoring
  • Machine event warnings and messaging

Operator Comfort

  • Industry leading access system, with low-effort climbing and three-points of contact
  • Exceptionally smooth machine performance
  • A 50% noise reduction from the F Series cab
  • Automatic temperature control
  • Cat Comfort Seat is Series III with vibration reduction
  • Electric window – left side
  • New foot rest addition

Operator Safety

  • Emergency egress out right side, hinged window
  • Enhanced ROPS/FOPS design in cab structure
  • Secondary braking
  • Ground level daily checks
  • TKPH/TMPH Tire Monitoring System
  • Warnings via Advisor display
  • Body up speed limited, can be set by customer
  • New tread plate design on access system; better traction; sheds material from walkways


The Cat C27 diesel engine is delivering 5% additional power to the drive train. As a result, new and more robust drive train components, including a larger drive shaft and differential gears, have been designed to handle the power.


G Series introduces a new planetary powershift transmission control strategy called APECS. APECS takes the benefits of Electronic Clutch Pressure Control (ECPC) and adds part throttle shifting and torque shift management. The result is exceptionally smooth automotive-type shifting and ride quality. APECS also retains torque and momentum through the shifts; increasing performance on grades. The result is quick starts from a standstill and exceptionally smooth shift and ride quality.


A new Traction Control System (TCS) is now steering sensitive to differentiate between tire spin or high speed turns. The system now uses the hydraulically applied service brakes (vs. spring applied secondary brakes), allowing it to engage sooner and at lower speeds. G Series TCS modulates power and braking instantaneously between the two wheel groups, allowing a more appropriate response to ground conditions and returning the truck to solid footing much sooner.

Fuel Saving Strategies

  • Standard Economy Mode – G Series can adjust engine power based on your individual needs. With this feature, fuel savings are achieved by reducing power between 0.15 to 15 percent.
  • Adaptive Economy Mode – New for G Series – requires a baseline for production from you. As the truck goes through the haul cycle, it constantly evaluates your baseline against opportunities to reduce power and save fuel. It’s fully automatic with no special operation required.
  • Speed Limiting – while you can continue to gear limit your G Series trucks, Caterpillar offers another alternative you can utilize which is the new speed limiting feature. Speed limiting allows the truck to travel in its most fuel efficient gear.
  • Auto Neutral Idle – as the 775G waits for the loader or crusher while idling in a forward gear, the transmission will automatically slip into a neutral state to avoid stalling the torque converter and raising engine rpm. As soon as the operator releases the brake or applies throttle, the truck is instantly back in the forward gear.
  • Engine Idle Shutdown – when your G Series truck is in park and idles for more than a preset time, which is set by the customer, the truck will initiate engine shutdown to conserve fuel. This feature can be time adjusted or turned on or off according to your specific needs.

New Brake Design

G Series has increased the number of springs in its brake design. This increases the force available to disengage the brakes ensuring clearances are maintained, reducing wear. A new brake wear indicator can be found on the rear wheels to help you monitor brake life.

Extending brake life can also be achieved by choosing the optional Cat Engine Brake. This Caterpillar design works in conjunction with the ARC to slow the machine.

Rear Wheel Steel Spindles

G Series wheel spindles are solid steel and interchangeable from one side to the other, extending their useful service life.

Inverted Rear Cylinders

For G Series, Caterpillar has inverted the rear suspension cylinders to better protect the rods, keeping them cleaner for longer durations.


Updated castings, improved bolted joints, and a larger rear axle have matched the chassis design with the higher power ratings and performance specifications of the truck.


G Series trucks retain the highly productive and reliable Cat C27 diesel engine.

  • With a 5% boost in power, the C27 is delivering higher torque for work.
  • With the precision and responsiveness of Cat MEUI™ fuel injectors and electronic controls, the C27 accurately controls fuel, emissions, and performance.
  • The C27 is carefully balanced with vibration controls that reduce noise and protect against unnecessary wear.
  • The C27 is cooled by either a demand fan (standard on Tier 4/Stage V) or conventional cooling fan.

Planetary Powershift Transmission

With new control strategies, this proven transmission is better than ever. Its new features include gear changes as smooth as an automobile and more torque through the shifts, getting the truck up to speed faster and negotiating grades quicker.

Tier 4/Stage V Emission Controls

Caterpillar offers a simple and robust U.S. EPA Tier 4 and EU Stage V passive solution. Other than normal maintenance, this system requires no additional input or intervention by the operator.

NOx Reduction

Supported by cleaner burning, ultra-low sulfur diesel fuel and low ash oils, Caterpillar uses its engine-mounted NOx Reduction System (NRS) Technology to cool combustion chamber temperatures to control NOx production.

PM Reduction

Located on top of the engine are two diesel oxidation catalysts (DOC), one for each exhaust outlet. These diesel oxidation catalysts reduce particulate emissions.

Tier 4/Stage V C27 engines are equipped with MEUI-C injectors. These injectors offer exceptional fuel atomization for engines running at slower speeds. MEUI-C injectors have an improved fuel shut off response time, saving fuel and reducing emissions.

Caterpillar has made it easier to get the right body for your materials and jobsite needs.

The 775G has a Dual Slope, a Flat Floor, and a Quarry body option.

Our base Flat Floor and Dual Slope bodies have a 20 mm (0.78 in), 400 BNH steel floor. Adding a steel or rubber liner is optional for those applications when you are working with highly abrasive or high impact materials.

Our Quarry body has a 25 mm (0.98 in), 400 BNH steel floor and is designed specifically for limestone applications without additional liners.

Two additional liner packages for the Flat Floor and Dual Slope bodies are available from the factory:

  • A 16 mm (0.62 in), 400 BNH steel liner
  • A 102 mm (4.01 in) rubber liner
  • Sideboards are optional from the factory for the Flat Floor or Dual Slope bodies
  • A body heat diverter kit is optional for both Dual Slope and Flat Floor bodies
You will find additional body specifications at the back of this document.

Caterpillar’s 10/10/20 Policy

Caterpillar’s 10/10/20 Payload Policy is in place to help you maximize component life and the availability of your truck. Your Cat dealer can further explain the 10/10/20 Payload Policy. For optimum body life, Caterpillar recommends that 110% payloads occur no more than 10% of the time and that the average of all loads equal the nominal payload. Payloads in excess of 120% of nominal exceed the truck’s design parameters.

Your G Series truck has the ability to communicate and receive valuable information. Information that can lead you to producing at a lower cost per ton.

Instrument Cluster

The instrument cluster is used primarily by the operator for quick and simple machine information at a glance. This display also warns the operator with solid lights (Category 1 Warnings) or flashing lights (Category 2 or 3 Warnings) as well as an audible alarm when an event is occurring.

Cat Advisor Display

The Advisor Display has five menus: 1. Operator: allows 10 people to set up individual profiles and preferences. 2. Monitor: displays four parameters per screen including: Payload – there are three sections: Payload State, Payload, and Target. Payload State – will display “Loading,” “Last Pass” or “Loaded.” Payload – displays the calculated payload weight, weight is taken twice to confirm. Target – displays the target payload. 3. Service: diagnostics including events, data logger, parameters, calibrations and more. 4. Settings: set specific targets for autolube intervals, speed limit and more. 5. Service Mode: a portal to password protected parameters.


Vital Information Management System (VIMS™) is the hardware and software behind the machine information and payload tracking that comes through the Advisor display on your 775G truck. VIMS is standard, and like the Truck Production Management System, can greatly improve your ability to manage your fleet efficiency, machine production, and provide operators with vital machine information.

Truck Production Management System

Cat Truck Production Management System will help you get the best return on your truck investment by making sure you’re hauling appropriate payloads with every cycle.

  • Indicator side lights show the loader operator when they are on their last pass and when the truck is fully loaded
  • Truck Production Management System stores 2,400 payload cycles; reports on weights, haul cycle times, distances, with date and time stamps

Ton Kilometer per Hour (TKPH), Ton Mile per Hour (TMPH) Tire Monitoring

This program takes the payload value from Truck Production Management System and combines it with ambient air temperature, machine speed, the manufacturer’s TKPH (TMPH) rating for your tires, and calculates tire condition continuously. As a tire approaches its temperature limits, the operator gets a warning inside the cab. This Caterpillar exclusive feature is an important tool in your efforts to extend tire life.

NOTE: TKPH (TMPH) is a measure of the tire’s temperature limits to prevent reverse vulcanization of the tire and the associated damage.

Cat Product Link™

Cat Product Link™ allows remote monitoring of equipment to improve overall fleet management effectiveness. Product Link is deeply integrated into machine systems. Events and diagnostic codes, as well as hours, fuel, idle time, and other detailed information are transmitted to a secure web-based application – VisionLink®. VisionLink includes powerful tools to convey information to users and dealers, including mapping, working and idle time, fuel level and more.

* Product Link licensing not available in all areas. Please consult your Cat dealer for availability.

G Series will introduce time-saving service improvements to simplify monitoring and maintaining machine fluid levels, help keep your site clean, and reduce your costs associated with service.

Fluid Fill Service Center

A new optional fluid fill service center is located on the right front side of the machine. Technicians can check the level of all machine fluids including:

  • Transmission/torque converter hydraulic oil
  • Hoist/Brake hydraulic oil
  • Diesel fuel
  • Engine oil
  • Engine coolant
A lighted keypad will indicate three green lights if the fluid level is full, two green lights if the fluid level is at normal levels, and one light if fluid should be added.

Cab Fluid Level Monitoring

The fluid levels cannot be checked in the cab via the Advisor screen options menu. All the fluids are being monitored, but will only indicate to the operator when the level is below a safe operating level.

Electrical Service Center

An Electrical Service Center is also at ground level located on the right front bumper of the machine.

This service center offers connections to: 1. Master Disconnect Switch 2. Auxiliary Start Receptacle 3. Light 4. VIMS Port 5. ET Port 6. Hydraulics Lockout 7. Engine Lockout 8. Breaker – Engine Control 9. Breaker – Alternator 10. Breaker – Main Electrical

Brake Wear Indicator

G Series trucks will come equipped from the factory with a simple, time-saving brake wear indicator on the left rear wheel that provides technicians with a visible indicator for rear break wear levels.


Due to improved hydraulic system updates, which have made the system more efficient, Caterpillar is able to extend hydraulic filter life to 1,000 hours under normal operating conditions. All engine filters are conveniently grouped and easily accessible.


The 775G fuel tank is now larger (795 L or 210 gallons) to extend running time. The tank includes two new sight gauges that levels at ¼ full and ¾ full. Note that Tier 4/Stage V equipped machines require ultra-low sulfur diesel fuel and low ash engine oil.

Cab Air Filter Precleaner

An optional cab precleaner is available for air filters. This option can significantly extend your cab filter life and service intervals. Our field follow program machines saw significant benefits to filter life in the G Series machines.

Air Inlet Filters

The engine air inlet filters are conveniently located for secure, simple service.

Cat trucks offer operators a comfortable, confident ride with safety features that help them stay informed, alert, and in control.


  • Ground level daily check points
  • Excellent visibility using mirrors, optional camera (WAVS), and in-cab display
  • Solid, stable walking/working platforms with good traction, material shedding, handrails
  • Emergency egress from within the cab through a hinged, right side window
  • Ground level electrical service box for lockout/tag out, steering system lockout
  • Ground level optional fluid fill center with level check keypad
  • Secondary steering, engages automatically
  • Three levels of braking (service, secondary, engine) red foot pedal for secondary brakes
  • ROPS/FOPS structures in cab
  • Brake wear indicator
  • Three-point harness operator seat belt
  • Trainer seat with lap belt
  • Body up speed limiting
  • Haul road speed limiting, setting safe conditions for everyone
  • Automatic Retarder Control, smooth predictable performance
  • New Traction Control System, returns the truck to solid footing sooner
  • In-cab fluid level monitoring for operator
  • TKPH/TMPH – Tire Monitoring System
  • Truck Production Management System providing payload, fuel, segment and cycle time information
  • Engine overspeed protection using ARC
  • Three levels of warning for parameters outside of their working zones

At Caterpillar, sustainable designs have always been a priority. Cat trucks have historically offered industry leading availability, life cycles, and parts commonality. Today we offer even more ways to reduce our impact on the environment.

With G Series, Caterpillar is pleased to be releasing its first North American Tier 4/Stage V product. In addition to contributing to better air quality, G Series offers lower operator sound levels and new ways to conserve fuel.

  • Fuel conservation features: two fuel economy modes, speed limiting, Auto Neutral Idle, Engine Idle Shutdown, new Traction Control System
  • Keeping the site clean with grouped service locations, ecology drains and convenient, optional fluid fill and electrical service centers
  • Reducing operator cab noise levels by 50% from previous trucks
  • Longer component life for tires using TCS and TKPH/TMPH
  • Longer life steel spindles, new brake designs, stronger frame
  • Cat Reman parts offer recycling and reuse opportunities with no risk
  • Longer service life for hydraulic oil filters (1,000 hrs) and air filters with precleaner installed
  • Improved air quality with Tier 4 emission controls (for North America) reducing NOx and Particulate Matter by 90% over Tier 3 as well as reduced CO2 emissions from fuel conservation
  • Parts commonality with other Cat equipment

Standard Equipment

  • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Cat C27 Tier 4/Stage V compliant diesel engine:
    – Air cleaner with precleaner (2)
    – Air-To-Air Aftercooler (ATAAC)
    – Electric start
    – Engine idle shutdown
    – Ether starting aid
    – Exhaust muffler
    – NGMR radiator
  • For Tier 4 regions only (U.S./Canada):
    – Aftertreatment system
    • NOx Reduction System (NRS)
    • Diesel Oxidation Catalyst (DOC)

    – Demand fan
    – MEUI-C fuel system
  • Braking system:
    – Extended Life Brakes
    – Automatic Retarder Control (ARC)
    – Manual retarder (utilizes rear oil-cooled, multiple disc brakes)
    – Brake release motor (towing)
    – Dry disc brakes (front)
    – Front brake disconnect switch (front)
    – Oil-cooled multiple disc brakes (rear)
    – Brake wear indicator (rear)
    – Parking brake
    – Secondary brake
    – Service brake
  • Transmission:
    – 7-speed automatic powershift with:
    • Electronic Clutch Pressure Control (ECPC)
    • Advanced Productivity Electronic Control Strategy (APECS)

    – Automatic neutral idle
    – Autostall
    – Second gear start
  • Suspension, front and rear
  • Alarm backup
  • Alternator, 120 Amp
  • Autolube power supply ready
  • Batteries, maintenance-free, 12V (2), 1,400 CCA combined
  • Electrical system, 25 Amp, 24V to 12V converter
  • Lighting system:
    – Backup light (halogen)
    – Directional signals/hazard warning (front and rear LED)
    – Engine compartment light
    – Headlights, (halogen) with dimmer
    – Operator access courtesy lights
    – Side profile lights
    – Stop/tail lights (LED)
  • Service center containing:
    – Battery jump start
    – Breakers with spare fuses
    – Lockout switch
    – Ports, ET, and VIMS
    – Service lockout switch (power without engine start)
  • Economy Modes, standard and adaptive
  • Product Link, cellular or satellite
  • Traction Control System (TCS)
  • Truck Production Management System
  • Vital Information Management System (VIMS)
  • Advisor display:
    – Air cleaner service indicator
    – Fluid level monitoring
    – Fuel level monitoring
    – Display languages (market based)
  • Air conditioning/heat
  • Automatic temperature control
  • Ashtray and cigarette lighter
  • Coat hook
  • Cup holders (4)
  • Diagnostic connection port, 24V
  • Entertainment radio ready:
    – 5 amp converter
    – Speakers
    – Antenna
    – Wiring harness
  • Foot rest
  • Gauges/indicators:
    – Brake oil temperature gauge
    – Coolant temperature gauge
    – Engine overspeed indicator
    – Fuel level
    – Hour meter
    – Speedometer with odometer
    – Tachometer
    – Transmission gear indicator
  • Hoist lever
  • Horn
  • Light – courtesy
  • Light – dome
  • Mirrors, non-heated
  • Power port, 24V and 12V (2)
  • Rollover Protection (ROPS)/Falling Object Protection (FOPS)
  • Seat, Cat Comfort Series III:
    – Full air suspension
    – Retractable 3-point seat belt with shoulder harness
  • Seat, training with lap belt
  • Steering wheel, padded, tilt and telescopic
  • Storage compartment
  • Sun visor
  • Throttle lock
  • Window, hinged, right side (emergency exit)
  • Window, powered, left side
  • Windshield wiper intermittent and washer
  • Driveline
  • Engine crankcase
  • Fan
  • Antifreeze
  • Extended life coolant to –34° C (–30° F)
  • Grouped ground-level filters
  • Body down indicator
  • Body safety pin (secures body in up position)
  • Center-mounted rims
  • Fuel tank, 795 L (210 gal)
  • Ground level battery disconnect
  • Ground level engine shutdown
  • Ground level grease fittings
  • Operator Maintenance Manual (OMM)
  • Rims 17 × 35
  • Rock ejectors
  • Secondary steering (electric)
  • Tie down eyes
  • Tow hooks (front)/tow pin (rear)
  • Vandalism protection locks

Optional Equipment

  • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Body heat
  • Body liner
  • Body sideboards
  • Cab precleaner
  • Cat Engine Brake
  • Clustered grease fittings
  • Cold weather packages
  • Fluid fill service center
  • HID lights
  • Mirrors, convex
  • Mirrors, heated
  • Spare rim
  • Visibility package (meets ISO 5006 requirements)
  • Wheel chocks
  • Work Area Vision System (WAVS)