SPECS SUMMARY

Nominal Payload Capacity345 ton (US) (313 ton (US))
Engine ModelCat C175-16
Gross Power - SAE J19953400 HP (2536 kW)
For those applications and situations where you prefer an electric drive truck Caterpillar now offers the 795F AC. The Cat AC drive system provides you the best retarding, braking and control in the industry. Designed and manufactured by Caterpillar, the 795 is the first AC electric drive truck that is single sources from one manufacturer and supported by the best dealer network in the industry.


Specifications

-Nominal Payload Capacity345 ton (US) (313 ton (US))
-Engine ModelCat C175-16
-Gross Power - SAE J19953400 HP (2536 kW)
-Gross Machine Operating Weight (GMW)1257000 lb (570678 kg)
-Top Speed - Loaded40 mile/h (64 km/h)
-Bore6.9 in (175 mm)
-Stroke8.7 in (220 mm)
-Displacement5187 in³ (85 l)
-Chassis Weight445524 lb (202270 kg)
-Net Power3188 HP (2377 kW)
-Steer Angle34 ° (34 °)
-Total Reduction Ratio35:1
-Effective Cylinder Stroke - Front11.5 in (293 mm)
-Effective Cylinder Stroke - Rear5.6 in (141 mm)
-Rear axle - Oscillation±4.8°
-Pump Flow - High Idle247 gal/min (935 l/min)
-Relief Valve Setting - Raise3553 psi (24500 kPa)
-Body Raise Time - High Idle19 s (19 s)
-Body Lower Time - Float20 s (20 s)
-Body Power Down - High Idle17.5 s (17.5 s)
-Fuel Tank - Optional1900 gal (US) (7192 l)
-Cooling System291 gal (US) (1100 l)
-Crankcase82 gal (US) (310 l)
-Steering Tank55.5 gal (US) (210 l)
-Steering System - Including Tank79 gal (US) (300 l)
-Brake/Hoist Hydraulic Tank134.2 gal (US) (508 l)
-Struck121.5-211 m3 (159-276 yd3)
-Heaped (SAE 2:1)181-252 m3 (237-330 yd3)
-Wheel MotorRear axle mounted Cat AC induction
-Sound StandardsStandards
-Fuel Tank950 gal (US) (3596 l)
-Front Axle - Loaded33 % (33 %)
-Brake Hoist System - Includes Tank396.3 gal (US) (1500 l)
-Final Drive - Each90 gal (US) (341 l)
-ROPS StandardsStandards
-Rear Axle - Loaded67 % (67 %)
-Turning Circle - Clearance Diameter127 ft (38.7 m)
-Gross Machine Operating Weight (GMW)1257000 lb (570678 kg)
-Body Weight Range38 500-54 500 kg (84,900-120,000 lb)
-Turning Diameter - Front112 ft (34 m)
-ControlsIGBT Inverter Technology, air cooled, pressurized cabinet with filtration
-Generator/AlternatorBrushless, remote mounted, dual bearing
-Cooling SystemVariable speed, hydraulic cooling system
-Oil Cooled Brakes - Retarding Capable at All Speeds - StandardsJ-ISO 3450 JAN88, ISO 3450:1996
-Blended Four Corner RetardingStandard
-Dynamic Retarding Power6370 HP (4750 kW)
-Oil Cooled Brakes - Retarding Capable at All Speeds - Brake Surface - Rear30750.2 in² (198388 cm²)
-Oil Cooled Brakes - Retarding Capable at All Speeds - Outside Diameter42 in (1067 mm)
-Oil Cooled Brakes - Retarding Capable at All Speeds - Brake Surface - Front20500.09 in² (132258.4 cm²)
-Electric Retarding - Radial Grid Design with Brushless AC Fan Motor4750 kW (6,370 hp) rated power
-Steering StandardsSAE J1511 OCT90 ISO 5010:1992
-Standard TiresChoices
-Front Axle - Empty48 % (48 %)
-Rear Axle - Empty52 % (52 %)

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER STANDARD EQUIPMENT
  • ANTIFREEZE

Optional Equipment

  • Body
  • Body Mounting Groups

Featured Used Equipment

740
$205,000
View More
420F2ST
$100,000
View More
140HNA
$143,500
View More
320EL
$136,000
View More