D Series Skid Steer Loaders and Compact Track Loaders D Series Skid Steer Loaders and Compact Track Loaders
D Series Skid Steer Loaders and Compact Track Loaders D Series Skid Steer Loaders and Compact Track Loaders
D Series Skid Steer Loaders D Series Skid Steer Loaders

SPECS SUMMARY

Engine ModelCat C2.2 CRDI
Net Flywheel Power65.8 HP (49.1 kW)
Gross Power - SAE J199567.1 HP (50.1 kW)
Net Power - SAE 134965.8 HP (49.1 kW)
The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.


Specifications

Engine ModelCat C2.2 CRDI
Net Flywheel Power65.8 HP (49.1 kW)
Gross Power - SAE J199567.1 HP (50.1 kW)
Net Power - SAE 134965.8 HP (49.1 kW)
Displacement134.3 in³ (2.2 l)
Stroke3.9 in (100 mm)
Bore3.3 in (84 mm)
Net Power - ISO 924966.5 HP (49.6 kW)
Peak Torque - 1,500 rpm - SAE J1995153 ft·lbf (208 N·m)
Operating Weight5705 lb (2588 kg)
Rated Operating Capacity1550 lb (703 kg)
Tipping Load3100 lb (1407 kg)
Breakout Force - Tilt Cylinder3983 lb (1807 kg)
Rated Operating Capacity with Optional Counterweight1650 lb (749 kg)
Wheel Base41.5 in (1054 mm)
Height - Top of Cab79.8 in (2028 mm)
Vehicle Width over Tires58.9 in (1497 mm)
Ground Clearance6.9 in (175 mm)
Departure Angle27.9°
Maximum Dump Angle46.7°
Bucket Pin Height - Carry Position8.5 in (215 mm)
Bucket Pin Height - Maximum Lift110.9 in (2818 mm)
Bumper Overhang - Behind Rear Axle35.2 in (894 mm)
Clearance at Maximum Lift and Dump81.8 in (2077 mm)
Length - With Bucket on Ground127.3 in (3234 mm)
Length - Without Bucket99.4 in (2524 mm)
Maximum Overall Height143.8 in (3652 mm)
Maximum Reach - With Arms Parallel to Ground50.7 in (1288 mm)
Rack Back Angle - Maximum Height88.9°
Reach - Maximum Lift/Dump21 in (533 mm)
Turning Radius from Center - Bucket77.8 in (1977 mm)
Turning Radius from Center - Coupler43.5 in (1104 mm)
Turning Radius from Center - Machine Rear59.6 in (1513 mm)
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)50.9 HP (38 kW)
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow26 gal/min (99 l/min)
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure3336 psi (23000 kPa)
Hydraulic Flow - Standard - Hydraulic Power (Calculated)35.5 HP (26.5 kW)
Hydraulic Flow - Standard - Loader Hydraulic Flow18 gal/min (69 l/min)
Hydraulic Flow - Standard - Loader Hydraulic Pressure3336 psi (23000 kPa)
ROPSISO 3471:2008
FOPSISO 3449:2005 Level I
FOPS Level IIISO 3449:2005 Level II
Travel Speed - Forward or Reverse - One Speed7.6 mile/h (12.3 km/h)
Travel Speed - Forward or Reverse - Two Speed Option11.1 mile/h (17.8 km/h)
Cooling System3.2 gal (US) (12 l)
Engine Crankcase2.6 gal (US) (10 l)
Fuel Tank15.1 gal (US) (57 l)
Hydraulic System11.9 gal (US) (45 l)
Hydraulic Tank9 gal (US) (34 l)
Chain Box - Each Side1.8 gal (US) (7 l)
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Inside Cab*83 dB(A) (83 dB(A))
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**102 dB(A) (102 dB(A))
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

Benefits and Features

Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environment with excellent work tool visibility. Available high-back, heated, air ride seat with seat mounted adjustable joystick controls makes the D Series the industry leader in operator comfort.

Maximize machine capability and control with optional Advanced Display providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, optional two speed travel and an electronic hand/foot throttle with decel pedal capability. High Flow hydraulic system is available for applications that demand maximum hydraulic work tool performance. Electronically controlled Cat C2.2 engine provides high horsepower and torque while meeting U.S. EPA Tier 4 Final (EU Stage IIIB) emission standards. Cat “Intelligent Leveling” system (ILEV) provides industry leading technology, integration and optional features such as dual direction self level, work tool return to dig and work tool positioner.

Speed Sensitive Ride Control option improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort.

Broad range of performance matched Cat Work Tools make the Cat Skid Steer Loader the most versatile machine on the job site.

Ground level access to all daily service and routine maintenance points helps reduce machine downtime for greater productivity.

Standard Equipment

  • 12 volt Electrical System
  • Gauges: Fuel Level, Hour Meter
  • Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final/Stage IIIB Emission Standards
  • Engine Enclosure, Lockable
  • Hydraulics, Standard or High Flow

Optional Equipment

  • Hand-Foot Style Controls