SPECS SUMMARY

Engine ModelCat C3.3B DIT (turbo)
Net Flywheel Power73.2 HP (54.6 kW)
Rated Operating Capacity1800 lb (818 kg)
The Cat 236D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.


Specifications

-Engine ModelCat C3.3B DIT (turbo)
-Net Flywheel Power73.2 HP (54.6 kW)
-Rated Operating Capacity1800 lb (818 kg)
-Operating Weight6559 lb (2975 kg)
-Gross Power - SAE J199574.3 HP (55.4 kW)
-Net Power - SAE 134973.2 HP (54.6 kW)
-Displacement203 in³ (3.3 l)
-Stroke4.7 in (120 mm)
-Bore3.7 in (94 mm)
-Tipping Load3600 lb (1633 kg)
-Breakout Force - Tilt Cylinder5074 lb (2302 kg)
-Wheel Base43.5 in (1105 mm)
-Height - Top of Cab82 in (2082 mm)
-Vehicle Width over Tires66 in (1676 mm)
-Ground Clearance7.7 in (195 mm)
-Departure Angle26°
-Maximum Dump Angle48°
-ROPSISO 3471:2008
-FOPSISO 3449:2005 Level I
-FOPS Level IIISO 3449:2005 Level II
-Chain Box - Each Side2.3 gal (US) (8.8 l)
-Cooling System3.7 gal (US) (14 l)
-Engine Crankcase3 gal (US) (11 l)
-Fuel Tank27.7 gal (US) (105 l)
-Hydraulic System13.2 gal (US) (50 l)
-Hydraulic Tank10.3 gal (US) (39 l)
-Travel Speed - Forward or Reverse - One Speed7 mile/h (11.2 km/h)
-Travel Speed - Forward or Reverse - Two Speed Option10.6 mile/h (17.1 km/h)
-Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-Hydraulic Flow - Standard - Loader Hydraulic Pressure3335 psi (23000 kPa)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
-Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
-Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
-Inside Cab*83 dB(A)
-Outside Cab**101 dB(A)
-Reach - Maximum Lift/Dump16 in (408 mm)
-Bumper Overhang - Behind Rear Axle40.2 in (1021 mm)
-Clearance at Maximum Lift and Dump92.9 in (2359 mm)
-Length - With Bucket on Ground137.3 in (3487 mm)
-Length - Without Bucket108.9 in (2767 mm)
-Bucket Pin Height - Maximum Lift122.9 in (3122 mm)
-Bucket Pin Height - Carry Position7.5 in (190 mm)
-Net Power - ISO 924973.9 HP (55.1 kW)
-Peak Torque - 1,500 rpm - SAE J1995195 HP (265 kW)
-Rated Operating Capacity with Optional Counterweight2000 lb (900 kg)
-Maximum Overall Height156.6 in (3977 mm)
-Maximum Reach - With Arms Parallel to Ground53.3 in (1353 mm)
-Hydraulic Flow - High Flow - Loader Hydraulic Flow30 gal/min (112 l/min)
-Hydraulic Flow - High Flow - Loader Hydraulic Pressure3335 psi (23000 kPa)
-Hydraulic Flow - Standard - Hydraulic Power (Calculated)39 HP (29 kW)
-Hydraulic Flow - High Flow - Hydraulic Power (Calculated)58 HP (43 kW)
-Turn Radius from Center - Machine Rear64.5 in (1639 mm)
-Rack Back Angle - Maximum Height91°
-Turn Radius from Center - Bucket83 in (2107 mm)
-Turn Radius from Center - Coupler51.8 in (1314 mm)
-Hydraulic Flow - Standard - Loader Hydraulic Flow20 gal/min (76 l/min)

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER
  • MANDATORY EQUIPMENT

Optional Equipment

  • OPTIONAL EQUIPMENT

Featured Used Equipment

140M2
$230,000
View More
140HNA
$110,000
View More
140M
$190,000
View More
545D
$310,000
View More
236D
$44,500
View More