SPECS SUMMARY

Engine ModelCat C3.3B DIT (turbo)
Net Flywheel Power72.9 mm H2O (54.4 kg/mm)
Rated Operating Capacity2150 lb (975 null)
The Cat 246D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.


Specifications

-Engine ModelCat C3.3B DIT (turbo)
-Net Flywheel Power72.9 mm H2O (54.4 kg/mm)
-Rated Operating Capacity2150 lb (975 null)
-Operating Weight7424 lb (3368 null)
-Gross Power - SAE J199574.3 mm H2O (55.4 kg/mm)
-Net Power - SAE 134972.9 mm H2O (54.4 kg/mm)
-Displacement203 in³ (3.3 l)
-Stroke4.7 in (120 mm)
-Bore3.7 in (94 mm)
-Tipping Load4300 lb (1950 null)
-Breakout Force - Tilt Cylinder7355 lb (3336 null)
-Wheel Base49.2 in (1249 mm)
-Height - Top of Cab83.1 in (2110 mm)
-Vehicle Width over Tires66 in (1676 mm)
-Ground Clearance8.9 in (226 mm)
-Departure Angle26°
-Maximum Dump Angle39°
-ROPSISO 3471:2008
-FOPSISO 3449:2005 Level I
-FOPS Level IIISO 3449:2005 Level II
-Chain Box - Each Side3.3 gal (US) (12.7 l)
-Cooling System3.7 gal (US) (14 l)
-Engine Crankcase3 gal (US) (11 l)
-Fuel Tank24.8 gal (US) (94 l)
-Hydraulic System13.7 gal (US) (52 l)
-Hydraulic Tank10.3 gal (US) (39 l)
-Travel Speed - Forward or Reverse - One Speed7.7 mile/h (12.5 km/h)
-Travel Speed - Forward or Reverse - Two Speed Option11 mile/h (17.7 km/h)
-Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-Hydraulic Flow - Standard - Loader Hydraulic Pressure3335 psi (23000 kPa)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterwei
-Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
-Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterwei
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterwei
-Inside Cab*81 dB(A)
-Outside Cab**101 dB(A)
-Reach - Maximum Lift/Dump23.6 in (600 mm)
-Bumper Overhang - Behind Rear Axle42.6 in (1083 mm)
-Clearance at Maximum Lift and Dump97.1 in (2465 mm)
-Length - With Bucket on Ground146 in (3708 mm)
-Length - Without Bucket117.8 in (2993 mm)
-Bucket Pin Height - Maximum Lift124.2 in (3154 mm)
-Bucket Pin Height - Carry Position7.9 in (200 mm)
-Net Power - ISO 924973.7 mm H2O (54.9 kg/mm)
-Peak Torque - 1,500 rpm - SAE J1995195 mm H2O (265 kg/mm)
-Rated Operating Capacity with Optional Counterweight2400 lb (1088 null)
-Maximum Overall Height158.7 in (4032 mm)
-Maximum Reach - With Arms Parallel to Ground54.6 in (1388 mm)
-Hydraulic Flow - High Flow XPS - Loader Hydraulic Flow32 gal/min (121 l/min)
-Hydraulic Flow - High Flow XPS - Loader Hydraulic Pressure4061 psi (28000 kPa)
-Hydraulic Flow - Standard - Hydraulic Power (Calculated)44 mm H2O (33 kg/mm)
-Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76 mm H2O (57 kg/mm)
-Turn Radius from Center - Machine Rear71.2 in (1806 mm)
-Rack Back Angle - Maximum Height96°
-Turn Radius from Center - Bucket85.9 in (2181 mm)
-Turn Radius from Center - Coupler55.2 in (1401 mm)
-Hydraulic Flow - Standard - Loader Hydraulic Flow23 gal/min (86 l/min)

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER
  • MANDATORY EQUIPMENT

Optional Equipment

  • OPTIONAL EQUIPMENT

Featured Used Equipment

420FST
$58,500
View More
246D
$36,000
View More
236D
$44,500
View More
938M
$195,000
View More
950K
$196,000
View More