SPECS SUMMARY

Engine ModelCat C3.8 DIT (turbo)
Net Flywheel Power106 mm H2O (79 kg/mm)
Rated Operating Capacity3650 lb (1656 null)
The Cat® 272D2 XHP Skid Steer Loader, with its powerful engine, high output hydraulic system, high lift forces and vertical lift design, provides the maximum performance for work tool productivity, digging, truck loading and material handling.


Specifications

-Engine ModelCat C3.8 DIT (turbo)
-Net Flywheel Power106 mm H2O (79 kg/mm)
-Rated Operating Capacity3650 lb (1656 null)
-Operating Weight9255 lb (4198 null)
-Gross Power - SAE J1995110 mm H2O (82 kg/mm)
-Net Power - SAE 1349106 mm H2O (79 kg/mm)
-Displacement232 in³ (3.8 l)
-Stroke4.7 in (120 mm)
-Bore3.9 in (100 mm)
-Tipping Load7300 lb (3311 null)
-Breakout Force - Tilt Cylinder7362 lb (3339 null)
-Breakout Force - Lift Cylinder6085 lb (2760 null)
-Wheel Base54.6 in (1386 mm)
-Height - Top of Cab84 in (2133 mm)
-Vehicle Width over Tires76 in (1930 mm)
-Ground Clearance10.4 in (263 mm)
-Departure Angle28°
-Maximum Dump Angle51°
-ROPSISO 3471:2008
-FOPSISO 3449:2005 Level I
-FOPS Level IIISO 3449:2005 Level II
-Cooling System4.1 gal (US) (16 l)
-Engine Crankcase3.5 gal (US) (13 l)
-Fuel Tank32.2 gal (US) (122 l)
-Hydraulic System14.5 gal (US) (55 l)
-Hydraulic Tank10.3 gal (US) (39 l)
-Travel Speed - Forward or Reverse - One Speed7.2 mile/h (11.6 km/h)
-Chain Box - Each Side2.7 gal (US) (10.2 l)
-Travel Speed - Forward or Reverse - Two Speed10.3 mile/h (16.6 km/h)
-Rated Operating Capacity with Optional Counterweight3900 lb (1769 null)
-Outside Cab***104 dB(A) (104 dB(A))
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
-Diesel Exhaust Fluid (DEF) Tank5 gal (US) (19 l)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
-Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-Note (2)**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
-Roll Back Angle28°
-Inside Cab**83 dB(A) (83 dB(A))
-Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
-Turning Radius from Center - Bucket (racked)90.6 in (2301 mm)
-Clearance at Maximum Lift and Dump97.4 in (2474 mm)
-Length - With Bucket on Ground155 in (3937 mm)
-Length - Without Bucket127 in (3226 mm)
-Maximum Overall Height161.5 in (4103 mm)
-Bumper Overhang - Behind Rear Axle46.2 in (1175 mm)
-Bucket Pin Reach - Maximum Lift13.5 in (344 mm)
-Net Power - ISO 9249107 mm H2O (80 kg/mm)
-Peak Torque - 1,500 rpm - SAE J1995276 ft·lbf (374 N·m)
-Bucket Pin Height - Carry Position9.3 in (235 mm)
-Bucket Pin Height - Maximum Lift128.6 in (3265 mm)
-Maximum Reach - With Arms Parallel to Ground49.1 in (1246 mm)
-Rack Back Angle - Maximum Height84°
-Hydraulic Flow - XHP - Maximum Loader Hydraulic Pressure4061 psi (28000 kPa)
-Note*When equipped with Cat 400 Series work tools.
-Standard Flow Mode - Hydraulic Power - Calculated44 mm H2O (33 kg/mm)
-Standard Flow Mode - Loader Hydraulic Flow23 gal/min (86 l/min)
-Hydraulic Flow - XHP - Maximum Loader Hydraulic Flow*40 gal/min (150 l/min)
-Hydraulic Flow - XHP - Hydraulic Power (Calculated)94 mm H2O (70 kg/mm)
-Reach - Maximum Lift/Dump29 in (736 mm)
-Turning Radius from Center - Coupler57.7 in (1466 mm)
-Turning Radius from Center - Machine Rear74.7 in (1899 mm)
-Standard Flow Mode - Loader Hydraulic Pressure3335 psi (23000 kPa)

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER
  • MANDATORY EQUIPMENT

Optional Equipment

Featured Used Equipment

420FST
$72,000
View More
289D
$37,500
View More
938M
$198,000
View More
938M
$180,000
View More