SPECS SUMMARY

Engine ModelCat C3.8 DIT (turbo)
Net Flywheel Power95 HP (71 kW)
Rated Operating Capacity3400 lb (1542 kg)
The Cat® 272D2 Skid Steer Loader, with its long wheel base and vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.


Specifications

-Engine ModelCat C3.8 DIT (turbo)
-Net Flywheel Power95 HP (71 kW)
-Rated Operating Capacity3400 lb (1542 kg)
-Operating Weight8768 lb (3977 kg)
-Gross Power - SAE J199598 HP (73 kW)
-Net Power - SAE 134995 HP (71 kW)
-Displacement232 in³ (3.8 l)
-Stroke4.7 in (120 mm)
-Bore3.9 in (100 mm)
-Tipping Load6800 lb (3084 kg)
-Breakout Force - Tilt Cylinder7443 lb (3376 kg)
-Breakout Force - Lift Cylinder6074 lb (2755 kg)
-Wheel Base54.6 in (1386 mm)
-Height - Top of Cab82.4 in (2094 mm)
-Vehicle Width over Tires72 in (1829 mm)
-Ground Clearance8.9 in (226 mm)
-Departure Angle27°
-Maximum Dump Angle51°
-ROPSISO 3471:2008
-FOPSISO 3449:2005 Level I
-FOPS Level IIISO 3449:2005 Level II
-Cooling System4.1 gal (US) (16 l)
-Engine Crankcase3.5 gal (US) (13 l)
-Fuel Tank32.2 gal (US) (122 l)
-Hydraulic System14.5 gal (US) (55 l)
-Hydraulic Tank10.3 gal (US) (39 l)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 880 CCA battery, 1829 mm (72 in) dirt bucket, no optional counterweights, Cat PC 12 × 16.5 tires and manual quick coupler (unless otherwise noted).
-Travel Speed - Forward or Reverse - One Speed6.6 mile/h (10.6 km/h)
-Travel Speed - Forward or Reverse - Two Speed Option9.4 mile/h (15.1 km/h)
-Chain Box - Each Side2.7 gal (US) (10.2 l)
-Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-Outside Cab**102 dB(A)
-Hydraulic Flow - Standard - Loader Hydraulic Pressure3335 psi (23000 kPa)
-Diesel Exhaust Fluid (DEF) Tank5 gal (US) (19 l)
-Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
-Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
-Roll Back Angle28°
-Inside Cab*83 dB(A)
-NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 880 CCA battery, 1829 mm (72 in) dirt bucket, no optional counterweights, Cat PC 12 × 16.5 tires and manual quick coupler (unless otherwise noted).
-Rack Back Angle - Maximum Height84°
-Bucket Pin Reach - Maximum Lift14.7 in (374 mm)
-Bumper Overhang - Behind Rear Axle46.2 in (1175 mm)
-Clearance at Maximum Lift and Dump96 in (2438 mm)
-Length - With Bucket on Ground155.7 in (3954 mm)
-Bucket Pin Height - Maximum Lift127.1 in (3229 mm)
-Bucket Pin Height - Carry Position7.8 in (198 mm)
-Net Power - ISO 924996 HP (71 kW)
-Peak Torque - 1,500 rpm - SAE J1995246 ft·lbf (334 N·m)
-Rated Operating Capacity with Optional Counterweight3650 lb (1656 kg)
-Length - Without Bucket127.6 in (3242 mm)
-Maximum Overall Height160.1 in (4067 mm)
-Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76 HP (57 kW)
-Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32 gal/min (121 l/min)
-Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure4061 psi (28000 kPa)
-Hydraulic Flow - Standard - Hydraulic Power (Calculated)44 HP (33 kW)
-Turning Radius from Center - Machine Rear74.7 in (1899 mm)
-Turning Radius from Center - Coupler58.3 in (1482 mm)
-Maximum Reach - With Arms Parallel to Ground50.5 in (1282 mm)
-Reach - Maximum Lift/Dump30.3 in (769 mm)
-Turning Radius from Center - Bucket (racked)89.8 in (2280 mm)
-Hydraulic Flow - Standard - Loader Hydraulic Flow23 gal/min (86 l/min)

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER
  • MANDATORY EQUIPMENT

Optional Equipment

Featured Used Equipment

140M
$200,000
View More
259D
$55,000
View More
262D
$32,000
View More
D6NXL
$185,000
View More