SPECS SUMMARY

Rated Load Capacity10000 lb (4536 kg)
Engine ModelCat® C4.4 ACERT™*
Gross Power - Basic142.1 HP (106 kW)
BCP


Specifications

-Rated Load Capacity10000 lb (4536 kg)
-Engine ModelCat® C4.4 ACERT™*
-Gross Power - Basic142.1 HP (106 kW)
-Maximum Forward Reach42 ft (12.8 m)
-Top Travel Speed20.5 mile/h (33 km/h)
-Standard400/75-28 Duraforce
-Fuel Tank38 gal (US) (145 l)
-Pump TypeVariable displacement load sensing axial piston pump
-Boom Up15 s (15 s)
-Boom Down13 s (13 s)
-Tele In16.3 s (16.3 s)
-Tele Out18.5 s (18.5 s)
-Carriages - Standard Tilt50 in (1270 mm)
-Pallet Forks - Option 2[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
-Carriages - Swing100°, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100°, 72 in, 10,000 lb Capacity, 5,000 lb Swung)
-Carriages - Standard Rotate50 in (1270 mm)
-Carriages - Side Shift48 in (1220 mm)
-Forward4 speed
-Reverse3 speed
-Carriages - Dual Positioning50 in (1270 mm)
-Carriages - Wide Rotate72 in (1829 mm)
-Pallet Forks - Option 1[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
-Cubing Forks[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
-Turning Radius - Over Tires14.1 ft (4.3 m)
-Lumber Forks - Option 1[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
-Carriages - Wide Tilt72 in (1829 mm)
-Lumber Forks - Option 2[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
-Hydraulic IT CouplerIncludes Auxiliary Electrics
-Note*For use with 1829 mm (72 in) Lumber Forks.
-Fork Extensions*90 in (2300 mm)
-Types (1)Trunnion mounted planetary 55 degree steer axles.
-Maximum Lift Height (o/r Down)54.9 ft (16.7 m)
-Optional400/75-28 Foam Filled; 14.00-24 Solid; 14.00 × 24 16PR; 14.00 × 24 12PR Foam Filled
-Diesel Exhaust Fluid (DEF) Tank5.7 gal (US) (21.5 l)
-Frame Leveling10°
-Capacity at Maximum Reach (o/r Down)2500 lb (1134 kg)
-Operating Weight31879 lb (14460 kg)
-Capacity at Maximum Height (o/r Down)5000 lb (2268 kg)
-Drawbar Pull - Loaded25605 lbf (113.9 kN)
-Parking BrakesWet disc, spring applied hydraulic release on front axle
-NoteAuxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
-System Operating Pressure3771 psi (260 bar)
-Auxiliary Hydraulic Pressure3307 psi (228 bar)
-Auxiliary Hydraulic Flow25 gal/min (95 l/min)
-Service BrakesInboard wet disc brakes on front and rear axles
-Types (2)High bias limited slip differential on front axle.
-Note*Meets U.S. EPA Tier 4 Final emission standards.
-Hydraulic System49 gal (US) (185 l)

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

140M2AWD
$250,000
View More
262D
$54,000
View More
950K
$225,000
View More
938M
$198,000
View More
140HNA
$90,000
View More