D Series Telehandler Overview D Series Telehandler Overview

SPECS SUMMARY

Engine Model Cat® C3.4B
Gross Power - Basic 100 HP (75 kW)
Note Meets U.S. EPA Tier 4 Final emission standards.
Operating Weight 22002 lb (9980 kg)
TL642D Telehandler


Specifications

Engine Model Cat® C3.4B
Gross Power - Basic 100 HP (75 kW)
Note Meets U.S. EPA Tier 4 Final emission standards.
Operating Weight 22002 lb (9980 kg)
Rated Load Capacity 6500 lb (2948 kg)
Maximum Lift Height 42 ft (12.8 m)
Maximum Forward Reach 30 ft (9.1 m)
Top Travel Speed 21 mile/h (33 km/h)
Capacity at Maximum Height 6500 lb (2949 kg)
Capacity at Maximum Reach 700 lb (317 kg)
Drawbar Pull - Loaded 19783 (88 kN)
Frame Leveling 10°
Turning Radius - Over Tires 12 ft (3.7 m)
Standard 370/75-28 Air Duraforce
Optional (1) 370/75-28 Foam Duraforce
Gear Pump Single-section
Fuel Tank 38.3 gal (US) (145 l)
Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US) (21.5 l)
Hydraulic System 40 gal (US) (151.5 l)
Boom Up 15 s (15 s)
Boom Down 10.3 s (10.3 s)
Tele In 9.5 s (9.5 s)
Tele Out 16.3 s (16.3 s)
Parking Brakes Wet disc, spring applied hydraulic release on front axle
Service Brakes Inboard wet disc brakes on front and rear axles
Type (1) Trunnion mounted planetary 55 degree steer axles.
Type (2) High bias limited slip differential on front axle.
Auxiliary Hydraulic Flow 18 gal/min (68 l/min)
Auxiliary Hydraulic Pressure 3481 psi (240 bar)
Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure 3770 psi (260 bar)
Optional (2) 13.00 × 24-16 PR Air
Optional (3) 13.00 × 24-12 PR Foam Filled
Optional (4) 13.00 × 24 Solid
Forward 4 speed
Reverse 3 speed
Carriages - Dual Fork Positioning 50 in (1270 mm)
Carriages - Side Shift 48 in (1220 mm)
Carriages - Standard Rotate 50 in (1270 mm)
Carriages - Standard Tilt 50 in (1270 mm)
Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Wide Rotate 72 in (1829 mm)
Carriages - Wide Tilt 72 in (1829 mm)
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Hydraulic IT Coupler Includes Auxiliary Electrics
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)