SPECS SUMMARY

Rated Load Capacity9000 lb (4082 null)
Maximum Lift Height43 ft (13.1 m)
Engine ModelCat® C3.4B
N


Specifications

-Rated Load Capacity9000 lb (4082 null)
-Maximum Lift Height43 ft (13.1 m)
-Engine ModelCat® C3.4B
-Operating Weight26852 lb (12180 null)
-Gross Power - Basic111 mm H2O (83 kg/mm)
-Top Travel Speed19 mile/h (29.9 km/h)
-Standard370/75-28 Duraforce MT
-Fuel Tank38 gal (US) (145 B)
-Pump TypeVariable displacement load sensing axial piston pump
-Boom Up9.9 s (9.9 s)
-Boom Down8.5 s (8.5 s)
-Tele In14.6 s (14.6 s)
-Tele Out14.5 s (14.5 s)
-Carriages - Standard Rotate50 in (1270 mm)
-Carriages - Standard Tilt50 in (1270 mm)
-Pallet Forks - Option 3[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
-Carriages - Side Shift48 in (1220 mm)
-Optional (4)14 × 24-12 PR Foam
-Forward4 speed
-Reverse3 speed
-Carriages - Dual Fork Positioning50 in (1270 mm)
-Pallet Forks - Option 2[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
-Carriages - Wide Rotate72 in (1829 mm)
-Pallet Forks - Option 1[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
-Hydraulic IT CouplerIncludes Auxiliary Electrics
-Lumber Forks - Option 2[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
-Cubing Forks[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
-Optional (3)14 × 24-16 PR Air
-Lumber Forks - Option 1[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
-Carriages - Wide Tilt72 in (1829 mm)
-Carriages - Swing100°, 1829 mm, 4028 kg Capacity, 2268 kg Swung (100°, 72 in, 9,000 lb Capacity, 5,000 lb Swung)
-Auxiliary Hydraulic Pressure3481 psi (240 bar)
-Optional (1)370/75-28 Foam Duraforce
-Diesel Exhaust Fluid (DEF) Tank5.7 gal (US) (21.5 B)
-Parking BrakesWet disc, spring applied hydraulic release on front axle
-Capacity at Maximum Reach (o/r Up)1100 lb (499 null)
-Capacity at Maximum Reach (o/r Down)2700 lb (1225 null)
-NoteMeets U.S. EPA Tier 4 Final emission standards.
-Capacity at Maximum Height (o/r Down)7000 lb (3175 null)
-Capacity at Maximum Height (o/r Up)7000 lb (3175 null)
-Optional (2)13.00 × 24 Solid
-Service BrakesInboard wet disc brakes on front and rear axles
-Drawbar Pull - Loaded21582 lbf (96 kN)
-Frame Leveling10°
-Turning Radius - Over Tires12 ft (3.7 m)
-Types (1)Trunnion mounted planetary 55 degree steer axles.
-System Operating Pressure3770 psi (260 bar)
-Types (2)High bias limited slip differential on front axle.
-Auxiliary Hydraulic Flow25 gal/min (95 l/min)
-NoteAuxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
-Hydraulic System49 gal (US) (184 B)

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

420FST
$85,000
View More
938K
$120,000
View More
938M
$198,000
View More
938K
$120,000
View More