D Series Telehandler Overview D Series Telehandler Overview

SPECS SUMMARY

Engine Model Cat® C3.4B
Gross Power - Basic 111 HP (83 kW)
Note Meets U.S. EPA Tier 4 Final emission standards.
Operating Weight 25750 lb (11680 kg)
TL943D Telehandler


Specifications

Engine Model Cat® C3.4B
Gross Power - Basic 111 HP (83 kW)
Note Meets U.S. EPA Tier 4 Final emission standards.
Operating Weight 25750 lb (11680 kg)
Rated Load Capacity 9000 lb (4082 kg)
Maximum Lift Height 43 ft (13100 mm)
Maximum Forward Reach 31 ft (9.4 m)
Top Travel Speed 19 mile/h (29.9 km/h)
Capacity at Maximum Height 7000 lb (3175 kg)
Capacity at Maximum Reach 1200 lb (544 kg)
Drawbar Pull - Loaded 21582 (96 kN)
Frame Leveling 10°
Turning Radius - Over Tires 12 ft (3.7 m)
Standard 370/75-28 Duraforce MT
Optional (1) 13.00 × 24 Foam Duraforce
Pump Type Variable displacement load sensing axial piston pump
Fuel Tank 38 gal (US) (145 l)
Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US) (21.5 l)
Boom Up 9.9 s (9.9 s)
Boom Down 8.5 s (8.5 s)
Tele In 14.6 s (14.6 s)
Tele Out 14.5 s (14.5 s)
Parking Brakes Wet disc, spring applied hydraulic release on front axle
Service Brakes Inboard wet disc brakes on front and rear axles
Types (1) Trunnion mounted planetary 55 degree steer axles.
Types (2) High bias limited slip differential on front axle.
Auxiliary Hydraulic Flow 25 gal/min (94 l/min)
Auxiliary Hydraulic Pressure 3481 psi (240 bar)
Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure 3770 psi (260 bar)
Optional (2) 14 × 24-16 PR Air
Optional (3) 14 × 24-12 PR Foam
Forward 4 speed
Reverse 3 speed
Carriages - Dual Fork Positioning 50 in (1270 mm)
Carriages - Side Shift 48 in (1220 mm)
Carriages - Standard Rotate 50 in (1270 mm)
Carriages - Standard Tilt 50 in (1270 mm)
Carriages - Swing 100°, 1829 mm, 4028 kg Capacity, 2268 kg Swung (100°, 72 in, 9,000 lb Capacity, 5,000 lb Swung)
Carriages - Wide Rotate 72 in (1829 mm)
Carriages - Wide Tilt 72 in (1829 mm)
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Hydraulic IT Coupler Includes Auxiliary Electrics
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Pallet Forks - Option 1 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Hydraulic System 47 gal (US) (177 l)