SPECS SUMMARY

Flywheel Power193 mm H2O (144 kg/mm)
Operating Weight44138 lb (20021 null)
Engine ModelCat C7.1 ACERT
Save money and transport time with one rugged machine for land clearing, digging, grading, truck loading, slope work and more. Crawler loaders give you reduced ground pressure and better traction so you can start the job earlier and work longer in soft underfoot conditions. Purpose-built Waste Handler, Ship Hold and Partial Steel Mill configurations stand up to the toughest applications. This new generation of Cat® Track Loaders brings you all of this, plus improved performance and fuel efficiency.
For complete machine specifications and available configurations, please see your Cat dealer or visit www.cat.com.


Specifications

-Flywheel Power193 mm H2O (144 kg/mm)
-Operating Weight44138 lb (20021 null)
-Engine ModelCat C7.1 ACERT
-Track on Ground100 in (2542 mm)
-Track Gauge72.8 in (1850 mm)
-Fuel Tank84.5 gal (US) (320 l)
-Note*With General Purpose bucket and extra duty teeth.
-Overall Machine Height - Bucket Fully Raised212.7 in (5402 mm)
-Grading Angle63°
-Maximum Rollback/Dump - Fully Raised52°/53°
-Maximum Rollback - Ground/Carry Position43°/50°
-Ground Clearance18.5 in (471 mm)
-Height - Top of Stack115.7 in (2940 mm)
-Machine Height - Top of Cab130.9 in (3325 mm)
-Height - Bucket Hinge Pin155.1 in (3940 mm)
-Ramp Angle29°
-Note(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
-DEF Tank(1)4.22 gal (US) (16 l)
-Note(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
-Note(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
-Operating Weight(1)44771 lb (20308 null)
-Note (2)Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
-Note (1)All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D74
-Overall Machine Width without Bucket: With Standard Tracks - 550 mm (21.6 in) Shoes94.5 in (2400 mm)
-Digging Depth*5.4 in (138 mm)
-Reach at Full Lift Height and 45° Dump*54 in (1373 mm)
-EmissionsU.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA
-Overall Machine Length*275.6 in (7001 mm)
-Width - Performance Series106.8 in (2712 mm)
-Ground Pressure - Standard Shoe9 psi (62 kPa)
-Ground Pressure(1) - Optional Shoe11.1 psi (76.9 kPa)
-Ground Pressure(1) - Standard Shoe9.1 psi (62.9 kPa)
-Grouser Height - Double Grouser1.65 in (42 mm)
-Ground Pressure - Optional Shoe11 psi (75.8 kPa)
-Ground Contact Area - Standard Shoe4900 in² (3.2 m²)
-Net Power - ISO 9249/SAE J1349193 mm H2O (144 kg/mm)
-Net Power - ISO 9249/SAE J1349 (DIN)196 mm H2O (144 kg/mm)
-Ground Contact Area - Optional Shoe4013 in² (2.6 m²)
-Track Rollers/Shoes - Each SideJul-38
-Track Shoe Width - Optional18 in (450 mm)
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
-Width - Multi-Purpose101.3 in (2575 mm)
-Bucket Height - Carry Position18 in (457 mm)
-Carry Position Approach Angle15°
-Width - General Purpose102.8 in (2612 mm)
-Capacity - Performance Series3.7 yd³ (2.8 m³)
-Track Shoe Width - Standard22 in (550 mm)
-Capacity - General Purpose3.2 yd³ (2.5 m³)
-Capacity - Multi-Purpose2.6 yd³ (2 m³)
-Clearance at Full Lift Height and 45° Dump*114.8 in (2915 mm)

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

420FST
$58,500
View More
262D
$38,000
View More
262D
$38,000
View More
938M
$198,000
View More
938K
$175,000
View More