SPECS SUMMARY

Typical Machine Length44.7 ft (13.6 m)
Installed Power1916 mm H2O (1429 kg/mm)
Haulage SystemAC inverter drive
N


Specifications

-Typical Machine Length44.7 ft (13.6 m)
-Installed Power1916 mm H2O (1429 kg/mm)
-Haulage SystemAC inverter drive
-Type (6)This unit also contains cutter motor contactors, circuit breakers, control transformer, current monitoring, HV fuses, earth leakage and a visible disconnect.
-TypeThis flameproof module contains the main 253 kVA haulage transformer, power supplies, auxiliary transformer, drive system circuit breaker and one 250 kW (335 hp), 600V AC inverter drive, with integrated regenerative braking.
-Type (5)An extremely powerful PMC Evo-S control system with state-of-the-art Ethernet communication and backup functionality, this allows the shearer to be operated even if the overall control system is not functioning.
-Type (3)All internal chassis can be ‘bench built,' tested and stored.
-Type (2)High current carrying capacity of 400 amps and can accommodate trailing cables up to 185 mm2 (2.9 in2).
-Type (1)This model of shearer is available with headlights, cameras, methane monitoring, end displays and audible alarms.
-Type (4)Box contains various LV circuit breakers which can be reset through the FLP cover, reducing downtime.
-Type (1)All hose assemblies are to ISO 6805 and proof tested to EN ISO 1402.
-Type (1)All hose assemblies are to ISO 6805 and proof tested to EN ISO 1402.
-Type (2)The hoses are assembled to Hose Assembly Standard DIN20066:201-10.
-Type (3)All hose and hosing is in compliance with guideline MDG 41 and MSHA regulations.
-Type (2)The hoses are assembled to Hose Assembly Standard DIN20066:201-10.
-Type (1)This flameproof module contains the majority of the shearer electrical control and power distribution components.
-Type (2)All electrical material is designed and certified to IEC standards and also complies with other regional and national standards, such as MSHA, GOST, MA, ATEX and DGMS, as well as Australia's New South Wales and Queensland regulations.
-Type (4)Versatility of application due to fully modular construction
-Type (3)Robust hydraulic reservoir of 190 L (50 gal) capacity
-Type (4)Integral monitoring transducers
-Type (2)Operating system pressure of 210 bar (3,046 psi)
-Type (1)Fixed displacement pump, with a capacity of 50 L/min (13 gal/min)
-Type (8)Suitable for all current rack type systems
-Type (5)For use with ISO 68 or ISO 100 hydraulic oils
-Type (6)Available with 6 section valve bank
-Type (3)Improved access for maintenance and ease of overhaul and repair
-Type (3)All hose and hosing is in compliance with guideline MDG 41 and MSHA regulations.
-Type (2)Maximum protection of electrical boxes, providing the highest level of flameproof integrity
-Type (1)High structural integrity and absorption of all cutting and haulage forces, providing maximum protection for all major units
-Type (7)This unit has a pump motor rating of 30 kW @ 50 Hz (48 hp @ 60 Hz)
-Type (5)A split mainframe is available in case of transportation limitations
-TypeA comprehensive health monitoring system is available, including oil levels and temperatures, flows, pressures and vibration analysis.
-Distance Between Trapping Shoe Centers241 in (6124 mm)
-Height - Top of Machine Main Body - Lowest Version47.2 in (1200 mm)
-Distance Between Ranging Arm Hinge Points320 in (8125 mm)
-Distance Between Drums with Arms Horizontal537 in (13635 mm)
-Cutting Drum Overall Width45 in (1142 mm)
-Diameter - Shearer Cutting Drum60 in (1524 mm)
-Machine Height - Over Main Body (< in lowest version)47.2 in (1200 mm)
-Maximum Cutting Height for Seam (Plus)126 in (3200 mm)
-Vertical Tunnel Clearance - Approximate18 in (460 mm)
-Width - Across Picks42 in (1067 mm)
-Shearer Drum Undercut of Floor (>)20 in (500 mm)
-Ranging Arm Length - Hinge to Drum108.5 in (2755 mm)
-Ranging Arm Cutting Drum Diameter60 in (1524 mm)
-Clearance from Drum to AFC Toeplate11 in (271 mm)
-AFC Pan Width (Typical - As Shown)45 in (1142 mm)
-Level of Automation (3)Integrated longwall automation with “Navigator 2 + 3”
-Level of Automation (4)“Longwall Navigator” for improved face alignment and horizon control
-Level of Automation (2)State-based shearer automation “Navigator 2”
-Level of Automation (1)Zone-based automation “Navigator 1”
-Type (7)Trapping shoe with replaceable wear inserts, safe and easy to replace (unique to Caterpillar)
-Type (1)Industry-leading Automation from the Pioneer of State-based Automation.
-Type (2)This shearer has a state-of-the-art distributed automation system for the control, monitoring and protection of the shearer. Its modular design allows it to be configured to meet individual control needs, from basic monitoring and protection to advanced a
-Type (6)Unlike competitor systems, the modularity of the longwall system and control allow the longwall to operate in “fault-tolerant” mode, even when there is a problem with the overall automation system.
-Type (7)In other words, integrated automation does not prevent control via individual PLC's in order to keep production up and running.
-Type (5)A Programmable Logic Controller (PLC) takes care of basic machine control tasks, ensuring that coal is produced.
-Type (4)The shearer is equipped with a state-of-the-art industry PC in a flame-proof housing with plenty of computing power, allowing flexibility to upgrade to future features such as condition monitoring.
-Type (3)The PMC Evo-S control system with state-of-the-art Ethernet communication and backup functionality allows the shearer to be operated even if the overall control system is not functioning.
-Type (4)This model of shearer is available with onboard filtration, dust suppression spray bars, shearer clearers and ranging arm spray rings.
-Type (5)Removable modular top drive wheel assembly
-Cutting Drum Speed40.2, 46.6 and 52.5 rpm
-Haulage Motor2 × 100 kW (2 × 134 hp)
-Cutting Drum Diameter1524 to 2000 mm (60 to 78 in)
-Body Height21 in (530 mm)
-Typical Machine Length - Drum Centers44.7 ft (13635 mm)
-Available Cutting Power2 × 597 kW (2 × 800 hp)
-Haulage PullUp to 732 kN/165 lbf (Up to 75 tonnes/82 tons)
-Haulage SpeedUp to 29.5 m/min (Up to 97 ft/min)
-Minimum Pan Width32.7 in (832 mm)
-Operating Voltage4160 V (4160 V)
-Machine Weight - Approximate66 ton (US) (60 t)
-Installed PowerUp to 1429 kW (Up to 1,916 hp)
-Haulage SystemAC inverter drive
-Seam Range1.6-3.2 m (63-126 in)
-Pump Motor40.2 mm H2O (30 kg/mm)
-Cutting Drum Speed33.5, 38.8 and 43.8 rpm
-Haulage Motor2 × 100 kW (2 × 134 hp)
-Cutting Drum Diameter1524 to 2000 mm (60 to 78 in)
-Body Height21 in (530 mm)
-Available Cutting Power2 × 500 kW (2 × 671 hp)
-Haulage PullUp to 732 kN / 165,000 ibf (up to 75 tonnes/82 tons)
-Haulage SpeedUp to 29.5 m/min (Up to 97 ft/min)
-Minimum Pan Width32.7 in (832 mm)
-Operating Voltage3300 V (3300 V)
-Machine Weight - Approximate66 t (60 t)
-Installed PowerUp to 1230 kW (Up to 1,649 hp)
-Haulage SystemAC inverter drive
-Pump Motor48 mm H2O (36 kg/mm)
-Seam Range1.6-3.2 m (63-126 in)
-Type (3)Available with Machine Position Encoder
-Type (4)Available with Machine Parking Brake
-Type (2)Transmission reduction of 132.6:1
-Type (1)Maximum power rating 100 kW (134 hp)
-Total Machine Pull732.11 kN/164.58 lbf (74.95 tonnes/82.62 tons)
-Type (5)Integral monitoring transducers
-Type (6)Quillshaft transmission protection
-Type (3)Maximum haulage pull of 732 kN (82 tons)
-Type (4)Fully removable, rehandable, modular gearbox
-Type (2)Transmission rating of 100 kW (134 hp)
-Type (1)Innovative and unique downdrive design
-Type (7)Online vibration monitoring
-Speed at Maximum Pull48.39 ft/min (14.75 m/min)
-Pull at Maximum Speed366.06 kN/82.3 lbf (37.48 tonnes/41.31 tons)
-RA560 (2)Transmission rating of 500 kW @ 33.5 rpm and above (40 rpm @ 60 Hz)
-RA560 (3)Maximum drum diameter of 2000 mm (78 in)
-RA560 (10)Available cutter motors – 500 kW @ 50 Hz (800 hp @ 60 Hz)
-RA560 (1)Designed and robustly tested – for longer service life.
-Typical Machine Length - Drum Centers44.7 ft (13635 mm)
-RA560 (4)Choice of drum speeds
-RA560 (5)Complete with 32 mm (1.3 in) bore, through shaft PFF/PBF wet cutting
-RA560 (9)A robust cowl drive mechanism is also available on this model
-Maximum Machine Speed96.77 ft/min (29.5 m/min)
-RA560 (8)Quillshaft transmission protection
-RA560 (7)Integral monitoring transducers
-RA560 (6)Square drum hub (440 mm [17.3 in] across flats)
-Type (6)Downdrive ratio 17T—23T—10T (two wheel configuration)

Benefits and Features

Standard Equipment

  • Gate End Data Connection

Optional Equipment

  • Coal Sizer
  • Gate End Data Connection

Featured Used Equipment

420FST
$62,500
View More
420F2ST
$100,000
View More
420F2ST
$100,000
View More
262D
$38,000
View More
930M
$150,000
View More