SPECS SUMMARY

Typical Machine Length45.1 ft (13.75 m)
Installed Power2548 mm H2O (1900 kg/mm)
Haulage SystemAC
N


Specifications

-Typical Machine Length45.1 ft (13.75 m)
-Installed Power2548 mm H2O (1900 kg/mm)
-Haulage SystemAC
-Diameter - Shearer Cutting Drum63 in (1600 mm)
-Cutting Height - Minimum71 in (1800 mm)
-Distance Between Ranging Arm Hinge Points336 in (8525 mm)
-Cutting Height - Maximum155 in (3930 mm)
-Distance Between Drums with Arms Horizontal537 in (14155 mm)
-AFC Pan Width - Maximum53 in (1342 mm)
-Type (4)High structural integrity and absorption of all cutting and haulage forces, providing maximum protection for all major units
-Type (5)A split mainframe is available in case of transportation limitations
-Distance Between Trapping Shoe Centers254 in (6453 mm)
-AFC Pan Width - Minimum41 in (1032 mm)
-Clearance from Drum to AFC Toeplate12 in (300 mm)
-Machine Height - Over Main Body56.8 in (1444 mm)
-Vertical Tunnel Clearance23.5 in (598 mm)
-AFC Pan Width - Maximum53 in (1342 mm)
-AFC Pan Width - Minimum41 in (1032 mm)
-Clearance from Drum to AFC Toeplate12 in (300 mm)
-Shearer Drum Undercut of Floor24 in (619 mm)
-Ranging Arm Length - Hinge to Drum111 in (2815 mm)
-Type (3)Versatility of application due to fully modular construction
-Maximum Cutting Drum Overall Width45.3 in (1150 mm)
-Ranging Arm Cutting Drum Diameter63 in (1600 mm)
-Height - Top of Machine Main Body56.8 in (1444 mm)
-Type (8)Fully removable, rehandable, modular gearbox
-Type (4)Maximum oil capacity of 25 L (7 gal)
-Type (5)Transmission reduction of 137:1
-Type (6)Maximum power rating 125 kW (168 hp)
-Type (7)This unit has a haulage motor rating of 125 kW (168 hp)
-Type (3)Integral monitoring transducers
-Type (2)Integral water cooling @ 9 L/min (2 gal/min)
-Pull at Maximum Speed472.75 kN/106,278 lbf (48.40 tonnes/53.35 tons)
-Speed at Maximum Pull46.83 ft/min (14.28 m/min)
-Total Machine Pull945.51 kN/212,559 lbf (96.80 tonnes/106.70 tons)
-Type (1)Quillshaft transmission protection
-Type (1)Available with Machine Parking Brake
-Type (2)Available with Machine Position Encoder
-Type (6)Downdrive ratio 17T—23T—10T (two wheel configuration)
-Type (7)Trapping shoe with replaceable wear inserts, safe and easy to replace (unique to Caterpillar)
-Cutting Height - Maximum163 in (4135 mm)
-Type (1)Maximum protection of electrical boxes, providing the highest level of flameproof integrity
-Type (5)Removable modular top drive wheel assembly (cartridge)
-Type (4)Innovative and unique downdrive design
-Type (1)Suitable for all current rack type systems
-Type (2)Transmission rating of 125 kW (168 hp)
-Type (3)Maximum haulage pull 945 kN (107 tons)
-Type (2)Improved access for maintenance and ease of overhaul and repair
-Diameter - Shearer Cutting Drum75 in (1900 mm)
-Clearance from Drum to AFC Toeplate12 in (300 mm)
-Cutting Height - Maximum180 in (4570 mm)
-Cutting Height - Minimum98 in (2500 mm)
-Diameter - Shearer Cutting Drum98 in (2500 mm)
-AFC Pan Width - Minimum41 in (1032 mm)
-AFC Pan Width - Maximum53 in (1342 mm)
-Ranging Arm Cutting Drum Diameter87 in (2200 mm)
-Ranging Arm Length - Hinge to Drum111 in (2815 mm)
-Shearer Drum Undercut of Floor31.2 in (793 mm)
-Vertical Tunnel Clearance28.5 in (725 mm)
-Distance Between Drums with Arms Horizontal537 in (14155 mm)
-Distance Between Ranging Arm Hinge Points336 in (8525 mm)
-Ranging Arm Length - Hinge to Drum111 in (2815 mm)
-Shearer Drum Undercut of Floor34 in (866 mm)
-Vertical Tunnel Clearance31.5 in (801 mm)
-Coal Sizer134 mm H2O (100 kg/mm)
-Ranging Arm Cutting Drum Diameter98 in (2500 mm)
-Maximum Cutting Drum Overall Width45.3 in (1150 mm)
-Distance Between Trapping Shoe Centers238 in (6056 mm)
-Height - Top of Machine Main Body64.8 in (1647 mm)
-Machine Height - Over Main Body64.8 in (1647 mm)
-Maximum Cutting Drum Overall Width45.3 in (1150 mm)
-Machine Height - Over Main Body61.8 in (1571 mm)
-Maximum Cutting Drum Overall Width45.3 in (1150 mm)
-Ranging Arm Cutting Drum Diameter75 in (1900 mm)
-Ranging Arm Length - Hinge to Drum111 in (2815 mm)
-Shearer Drum Undercut of Floor28.3 in (718 mm)
-Machine Height - Over Main Body58.8 in (1495 mm)
-Height - Top of Machine Main Body58.8 in (1495 mm)
-Maximum Machine Speed93.66 ft/min (28.56 m/min)
-Distance Between Drums with Arms Horizontal537 in (14155 mm)
-Distance Between Ranging Arm Hinge Points336 in (8525 mm)
-Distance Between Trapping Shoe Centers238 in (6056 mm)
-Vertical Tunnel Clearance25.5 in (649 mm)
-AFC Pan Width - Maximum53 in (1342 mm)
-Distance Between Drums with Arms Horizontal537 in (14155 mm)
-Distance Between Ranging Arm Hinge Points336 in (8525 mm)
-Distance Between Trapping Shoe Centers260 in (6612 mm)
-Height - Top of Machine Main Body61.8 in (1571 mm)
-Diameter - Shearer Cutting Drum87 in (2200 mm)
-Cutting Height - Minimum87 in (2200 mm)
-AFC Pan Width - Minimum41 in (1032 mm)
-Clearance from Drum to AFC Toeplate12 in (300 mm)
-Cutting Height - Maximum172 in (4360 mm)
-Cutting Height - Minimum75 in (1900 mm)
-Type (7)Choice of drum speeds
-Cutting Drum Speed39.4, 44.9 and 54.3 rpm
-Haulage Motor2 x 125 kW (2 x 168 hp)
-Haulage PullUp to 1049 kN (107 tons)
-Haulage SpeedUp to 30 m/min (98.5 ft/min)
-Cutting Drum Diameter1600-2500 mm (63-98.5 in)
-Body Height23.6 in (600 mm)
-Pump Motor40 mm H2O (30 kg/mm)
-Seam Range1.8-4.5 m (71-177 in)
-Typical Machine Length - Drum Centers46.4 ft (14155 mm)
-Available Cutting Power2 x 597 kW (2 x 800 hp); 2 x 746 kW (2 x 1,000 hp); 2 x 895 kW (2 x 1,200 hp)
-Haulage SystemAC inverter drive
-Installed PowerUp to 1780 kW (Up to 2,387 hp)
-Typical Machine Length - Drum Centers46.2 ft (14082 mm)
-Type (1)Operating system pressure of 260 bar (3,770 psi)
-Type (2)Integral monitoring transducers
-Type (3)For use with ISO 68 or ISO 100 hydraulic oils
-Seam Range1.8-4.5 m (71-177 in)
-Pump Motor40 mm H2O (30 kg/mm)
-Machine Weight - Approximate77 ton (US) (78 t)
-Minimum Pan Width40.6 in (1032 mm)
-Operating Voltage4160 V (4160 V)
-Operating Voltage3300 V (3300 V)
-Minimum Pan Width40.6 in (1032 mm)
-Haulage SpeedUp to 32 m/min (Up to 105 ft/min)
-Height Range1.80-4.50 m (71-177 in)
-Machine Weight - Approximate77 t (70 ton (US))
-Operating Voltage2300V, 3300V, 4160V
-Haulage PullUp to 920 kN/206,824 lbf (Up to 91 tonnes/100 tons)
-Cutting Drum Diameter1.40-2.30 m (55-91 in)
-Applicable Minimum Pan Width40.6 in (1032 mm)
-Available Cutting Power2 × 500 kW (2 × 671 hp); 2 × 620 kW (2 × 831 hp); 2 × 750 kW (2 × 1,006 hp)
-Available Haulage Motors2 × 125 kW (2 × 168 hp)
-Body Height20.5 in (520 mm)
-Pump Motor67 mm H2O (50 kg/mm)
-Available Cutting Power2 x 500 kW (2 x 671 hp); 2 x 620 kW (2 x 831 hp); 2 x 750 kW (2 x 1,006 hp)
-Haulage SpeedUp to 30.1 m/min (98.8 ft/min)
-Haulage SystemAC inverter drive
-Installed PowerUp to 1780 kW (Up to 2,387 hp)
-Machine Weight - Approximate69 t (70 t)
-Haulage PullUp to 945 kN (96 tons)
-Haulage Motor2 x 125 kW (2 x 168 hp)
-Body Height23.6 in (600 mm)
-Cutting Drum Diameter1600-2500 mm (63-98.5 in)
-Cutting Drum Speed32.8, 37.4 and 45.2 rpm
-Type (4)Robust hydraulic reservoir of 165 L (43.6 gal) capacity
-Type (5)This unit has a pump motor rating of 30 kW @ 50 Hz (48 hp @ 60 Hz)
-Type (4)Unlike competitor systems, modularity of the longwall system & control allows the longwall to operate in “fault-tolerant” mode.
-Type (5)In other words, integrated automation does not prevent control via individual PLC's in order to keep production up and running.
-Type (6)PMC Evo-S control system with state-of-the-art Ethernet communication and backup functionality.
-Type (7)This shearer has a state-of-the-art distributed automation system for the control, monitoring and protection of the shearer.
-Type (3)State-of-the-art industry PC allows flexibility to upgrade to future features such as condition monitoring.
-Type (2)The shearer is equipped with a state-of-the-art industry PC in a flame-proof housing with plenty of computing power.
-Level of Automation (3)“Longwall Navigator” for improved face alignment and horizon control
-Level of Automation (4)Integrated longwall automation with “Navigator 2 + 3”
-Type (1)PMC Evo-S control system allows the shearer to be operated even if the overall control system is not functioning.
-Type (10)Its modular design allows it to be configured to meet individual control needs.
-Type (8)A Programmable Logic Controller (PLC) takes care of basic machine control tasks, ensuring that coal is produced.
-Type (9)Industry-leading Automation from the Pioneer of State-based Automation.
-Type (4)A robust cowl drive mechanism is also available on this model
-Type (5)Online vibration monitoring with VibraGuard
-Type (6)Available cutter motors - 500 kW, 620 kW and 750 kW, @ 50 Hz (800 hp, 1,000 hp and 1,200 hp, @ 60 Hz)
-Type (8)Complete with 32 mm (1.3 in) bore, through shaft PFF/PBF wet cutting
-Type (3)Square drum hub (440 mm [17.3 in] across flats)
-Type (2)Maximum drum diameter of 2500 mm (98 in)
-Type (1)Transmission rating of 750 kW @ 37.4 rpm and above
-Type (10)Quillshaft transmission protection
-Type (11)Maximum oil capacity of 28 L (7 gal) in high speed compartment and 30 L (8 gal) in the epicyclic
-Level of Automation (2)Zone-based automation “Navigator 1”
-Level of Automation (1)State-based shearer automation “Navigator 2”
-Type (5)An extremely powerful PMC Evo-S control system with state-of-the-art Ethernet communication and backup functionality.
-Type (6)This unit contains cutter motor contactors, circuit breakers, control transformer and current monitoring.
-Type (7)Box contains various low voltage (LV) circuit breakers which can be reset through the flame proof (FLP) cover, reducing downtime
-Type (1)Module contains drive system circuit breaker and one 250 kW, 600V AC inverter drive, with regenerative braking module.
-Type (4)This unit also contains high voltage (HV) fuses, earth leakage and a visible disconnect.
-Type (3)All internal chassis can be ‘bench built,' tested and stored.
-Type (6)Fixed displacement pump, with a capacity of 50 L/min (13.21 gal/min)
-Type (7)Available with 6 section valve bank
-Type (1)This flameproof module contains the majority of the shearer electrical control and power distribution components.
-Type (2)High current carrying capacity of 400 amps and can accommodate trailing cables up to 185 mm2 (2.9 in2).
-Type (2)This flameproof module contains the main 253 kVA haulage transformer, power supplies and auxiliary transformer.
-Type (1)This model of shearer is available with headlights, cameras, methane monitoring, end displays and audible alarms.
-Type (2)This shearer is available with onboard filtration, dust suppression spray bars, shearer clearers and ranging arm spray rings.
-Type (3)The hoses are assembled to Hose Assembly Standard DIN20066:201-10.
-Type (1)This system monitors oil levels and temperatures, flows, pressures and vibration.
-Type (2)A comprehensive health monitoring system is available.
-Type (1)All hose assemblies are to ISO 6805 and proof tested to EN ISO 1402.
-Type (3)All hose assemblies are to ISO 6805 and proof tested to EN ISO 1402.
-Type (2)All electrical material is designed and certified to IEC standards and also complies with other regional and national standards.
-Type (1)All hose and hosing is in compliance with guideline MDG 41 and MSHA regulations.
-Type (2)The hoses are assembled to Hose Assembly Standard DIN20066:201-10.
-Type (9)Integral monitoring transducers

Benefits and Features

Standard Equipment

  • Gate End Data Connection

Optional Equipment

  • Coal Sizer

Featured Used Equipment

420FST
$75,000
View More
140HNA
$80,000
View More
140M2AWD
$250,000
View More
D6TXWVP
$306,000
View More
926M
$156,000
View More