SPECS SUMMARY

Operating SystemµITRON RTOS
Processor32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes
RAM Memory4Mbytes CMOS Static RAM, 4Mbytes Flash
The intrinsically safe Cat® PMC-D control is used on shearer or plow faces to provide high level AFC (armed face conveyor) and plow automation. Each Drive unit needs to be equipped with one PMC-D control unit and equivalent I/O to operate the CST drives or UEL gearbox functions. In such a system a Cat PMC-V provides the Human Machine Interface (HMI) to interfere with the PMC-D controls to operate manual mode, visualize and change parameters and show actual process values. Within a PMC-D system minimum one and typically up to 3 PMC-Vs are in equal operation. The PMC-D system can control extremely sensitive the speed and torque of highly powered AFC CST drive. Using Profibus network all PMC-Ds and PMC-Vs in a system could exchange process data over long distances with high frequency.


Specifications

-Operating SystemµITRON RTOS
-Processor32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes
-RAM Memory4Mbytes CMOS Static RAM, 4Mbytes Flash
-Socket 3 - Pin 4GND
-Socket 4 - Pin 1+12 V (C) (output)
-Socket 3 - Pin 2Serial Interface: RxD_B
-Socket 4 - Pin 2Serial Interface: RxD_C
-Socket 3 - Pin 3Serial Interface: TxD_B
-Socket 4 - Pin 4GND
-Socket 5 - Pin 2Switch 1
-Socket 5 - Pin 1+12 V (C) (output)
-Socket 3 - Pin 1+12 V (B) (output)
-Socket 4 - Pin 3Serial Interface: TxD_C
-Socket 20 - Pin 2CM-Sensor +
-Socket 2 - Pin 1+12 V (A) (output)
-Socket 19 - Pin 4CM-GND
-Socket 19 - Pin 3CM-Sensor -
-Socket 19 - Pin 2CM-Sensor +
-Socket 2 - Pin 2Serial Interface: RxD_0
-Socket 2 - Pin 3Serial Interface: TxD_0
-Socket 20 - Pin 3CM-Sensor -
-Socket 5 - Pin 3Switch 2
-Socket 2 - Pin 4GND
-Socket 20 - Pin 4CM-GND
-Socket 6 - Pin 2Profibus: a (internal)
-Provides vibration monitoring functionality for longterm health monitoring of the following longwall related equipment: (3)• Stage loader gearbox and relating motor • Crusher and relating motor
-Provides vibration monitoring functionality for longterm health monitoring of the following longwall related equipment: (2)• Shearer haulage and ranging arm gearboxes • Water/HFA pump station
-Provides vibration monitoring functionality for longterm health monitoring of the following longwall related equipment: (1)• CST gearbox and relating motor • UEL gearbox and relating motor
-Socket 9 - Pin 4GND
-Height5.83 in (148 mm)
-Length13.19 in (335 mm)
-Width10.98 in (279 mm)
-Length13.19 in (335 mm)
-Height4.92 in (125 mm)
-Width10.94 in (278 mm)
-Socket 9 - Pin 3+8.2 V (output)
-Socket 9 - Pin 2Multi Mode Input 2
-Socket 7 - Pin 4GND (Power Supply)
-Socket 7 - Pin 1+12 V (Power Supply)
-Socket 6 - Pin 3Profibus: b (internal)
-Socket 18 - Pin 4CM-GND
-Socket 8 - Pin 1Multi Mode Input 4
-Socket 8 - Pin 2Multi Mode Input 1
-Socket 9 - Pin 1Multi Mode Input 5
-Socket 8 - Pin 4GND
-Socket 8 - Pin 3+8.2 V (output)
-Socket 5 - Pin 4GND
-Socket 18 - Pin 2CM-Sensor +
-Socket 1 - Pin 2Relay Contact NO: a
-Socket 1 - Pin 1Optocoupler Anode
-Temperature - Typical Value68 °F (20 °C)
-Temperature - SymbolTamb
-Socket 1 - Pin 3Relay Contact NO: b
-Socket 1 - Pin 4Optocoupler Cathode
-Socket 10 - Pin 3+8.2 V (output)
-Socket 10 - Pin 2Multi Mode Input 3
-Socket 10 - Pin 1+12 V (output)
-Temperature - Maximum Ratings-20° C - +40° C (-4° F - +104° F)
-Supply Voltage - Typical Value12 V DC
-Types (4)Australia: IECEx, ANZEx
-Types (3)More certifications on demand
-Types (2)U.S.: MSHA
-Types (1)Europe: ATEX
-Types (5)China: MA
-Types (6)Russia: GOST
-Supply Voltage - Maximum Ratings9.5 V - 13.2 V
-Supply Current - Typical Value1 A (1 A)
-Supply Current - Maximum Ratings1.5 A (1.5 A)
-Socket 10 - Pin 4GND
-Socket 11 - Pin 1+12 V (output)
-Socket 16 - Pin 2CM-Sensor +
-Socket 15 - Pin 4CM-GND
-Socket 15 - Pin 3CM-Sensor -
-Socket 15 - Pin 2CM-Sensor +
-Socket 16 - Pin 3CM-Sensor -
-Socket 16 - Pin 4CM-GND
-Socket 17 - Pin 4CM-GND
-Socket 17 - Pin 3CM-Sensor -
-Socket 17 - Pin 2CM-Sensor +
-Socket 14 - Pin 4CM-GND
-Socket 14 - Pin 3CM-Sensor -
-Socket 12 - Pin 2TP a
-Socket 11 - Pin 4GND
-Socket 11 - Pin 3+8.2 V (output)
-Socket 11 - Pin 2Multi Mode Input 6
-Socket 12 - Pin 3TP b
-Socket 13 - Pin 2CM-Sensor +
-Socket 14 - Pin 2CM-Sensor +
-Socket 13 - Pin 4CM-GND
-Socket 13 - Pin 3CM-Sensor -
-Socket 18 - Pin 3CM-Sensor -

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

420FST
$95,000
View More
CB54
$130,000
View More
TH514
$85,000
View More
305E2CR
$55,000
View More