|Engine Model||C27 Cat®|
|Gross Power||752 HP (561 kW)|
|Operating Weight||165089 lb (74883 kg)|
|Bore||5.4 in (137.2 mm)|
|Engine Model||C27 Cat®|
|Gross Power||752 HP (561 kW)|
|Operating Weight||165089 lb (74883 kg)|
|Bore||5.4 in (137.2 mm)|
|Stroke||6 in (152.4 mm)|
|Displacement||1649.5 in³ (27.03 l)|
|Torque Rise||18 % (18 %)|
|Converter Drive - Forward 1||4.5 mile/h (7.3 km/h)|
|Converter Drive - Forward 2||8.3 mile/h (13.3 km/h)|
|Converter Drive - Forward 3||14.2 mile/h (22.9 km/h)|
|Converter Drive - Reverse 1||4.9 mile/h (7.9 km/h)|
|Converter Drive - Reverse 2||9.1 mile/h (14.7 km/h)|
|Converter Drive - Reverse 3||15.5 mile/h (24.9 km/h)|
|Direct Drive - Forward 2||8.5 mile/h (13.7 km/h)|
|Direct Drive - Forward 3||15.2 mile/h (24.5 km/h)|
|Direct Drive - Reverse 1||5.4 mile/h (8.7 km/h)|
|Direct Drive - Reverse 2||9.6 mile/h (15.4 km/h)|
|Direct Drive - Reverse 3||16.4 mile/h (26.4 km/h)|
|Fuel Tank - Standard||286.6 gal (US) (1085 l)|
|Cooling System||54.9 gal (US) (208 l)|
|Crankcase||20 gal (US) (76 l)|
|Transmission||29.1 gal (US) (110 l)|
|Differential - Final Drives - Front||71.6 gal (US) (271 l)|
|Differential - Final Drives - Rear||68.9 gal (US) (261 l)|
|Brakes||Meets ISO 3540:2011|
|Cylinders, Double Acting - Lift, Bore and Stroke||133 mm × 1535 mm (5.25 in × 60.4 in)|
|Steering System - Circuit||Pilot, load sensing|
|Relief Valve Setting - Bulldozer (Large Pump)||2700 psi (18650 kPa)|
|Cylinder, Double Acting - Tilt and Tip, Bore and Stroke||210 mm × 188 mm (8.25 in × 7.4 in)|
|Output at 2,000 rpm and 6900 kPa (1,000 psi)||82 gal/min (311 l/min)|
|Relief Valve Setting - Tilt Cylinders (Small Pump)||2920 psi (20150 kPa)|
|Total Steering Angle||35 ° (35 °)|
|Maximum Flow||94.3 gal/min (357 l/min)|
|Minimum Turning Radius - Over Blade||34 ft (10369 mm)|
|Ground Clearance||2 ft (596 mm)|
|Height - Top of Exhaust Pipe||16.6 ft (5049 mm)|
|Relief Valve Setting||4500 psi (31000 kPa)|
|Steering System - Pump||Piston, variable displacement|
|Machine Sound Level (ISO 6395:2008)||113 dB(A) (113 dB(A))|
|Height - Top of ROPS||17.2 ft (5240 mm)|
|Centerline of Front Axle to Hitch||7.5 ft (2300 mm)|
|Centerline of Rear Axle to Edge of Bumper||12.5 ft (3795 mm)|
|Length - With Blade on Ground||36.5 ft (11120 mm)|
|Wheel Base||15.1 ft (4600 mm)|
|Operator Sound Level (ISO 6396:2008)||69 dB(A) (69 dB(A))|
|Hydraulic System - Implement and Hydraulic Fan||68.9 gal (US) (261 l)|
|Operator Sound Level (ISO 6396:2008)||69 dB(A) (69 dB(A))|
|Transmission Type||Cat Planetary Power Shift|
|Net Power - SAE J1349 - Standard Ambient||699 HP (521 kW)|
|Net Power - SAE J1349||699 HP (521 kW)|
|Gross Power - ISO 14396||752 HP (561 kW)|
|Net Power - SAE J1349 - High Ambient||648 HP (483 kW)|
|Peak Torque - Speed||2624 lb/ft (3557 N·m)|
|Emissions||U.S. EPA Tier 4 Final or Tier 2 Equivalent|
|Rated Speed||1800 r/min (1800 r/min)|
|Gross Power - SAE J1995||766 HP (571 kW)|
|Direct Drive - Forward 1||Lock-up disabled|
|Machine Sound Level (ISO 6395:2008)||115 dB(A) (115 dB(A))|
|Hydraulic System - Steering and Braking||34.9 gal (US) (132 l)|
|Cab - ROPS/FOPS (1)||Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.|
|Air Conditioning||Standard air conditioning system contains environmentally friendly R134a refrigerant|
|ROPS||ROPS meets SAE J11040 APR88, ISO 3471:2008 and ISO 3471:1994 criteria.|
|Cab - ROPS/FOPS (2)||SAE J11040 APR88, ISO 3471:2008, ISO 3471:1994|
|FOPS||FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.|
|Oscillation Angle||8.5 ° (8.5 °)|
|Blade Capacity Range||15,9-30,7 m3 (20,7-40,2 yd.3)|
|Height - Top of Hood||12.7 ft (3862 mm)|
Benefits and Features
Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions.
- Full box-section rear frame resists torsional shock and twisting forces.
- Castings in the engine end frame are used in high stress areas to spread high loads.
- Cast axle pivot mounting areas better disperse stress loads for increased structural integrity.
- 90 percent of the machine structure is robotically welded to provide highly consistent welds and increased strength.
Your key to maximum uptime and productivity is our purpose built front and rear frames.
- Full box-section frames absorb torsional forces during dozing, maintaining alignment for hitch pins and drive line.
- Spread hitch design features double tapered roller bearings and hardened pins that resist both horizontal and vertical loads.
- Enhance strength in key pin areas through the use of one piece castings.
Push Beam and Push Arm Dozer Arrangement
To ensure long life and reliability, solid one piece push beams are through-width, not merely attached to the side of the frame. In corner dozing, stresses are transferred and absorbed through a larger portion of the frame.
Steering and Transmission Integrated Control System (STIC™)
Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.
- Simple side-to-side motion turns machine right or left, minimizing operator movements.
- Easy to operate finger controlled gear selection.
- Smoother, faster cycles and less operator fatigue through the use of low effort integrated controls.
Cat Planetary Powershift Transmission
Building your success begins with a best-in-class transmission designed specifically for mining applications.
- Consistent, smooth shifting and efficiency through integrated electronic controls.
- Long life and reliability through heat treat gear and metallurgy.
- Three forward and three reverse speeds to match your application.
Cat C27 Engine
Durability and efficiency powering your 844K comes from the Cat C27 Engine. Optimum performance is built in through the use of a 12 cylinder, direct injection design.
- Optimized performance and quick engine response with an electronic control module.
- Reliable efficiency with complete control over injection timing, duration and pressure with Mechanically Actuated Electronic Unit Injection (MEUI™).
- Extended engine life and improved fuel efficiency with reduced rated speed.
- Designed to meet U.S. EPA Tier 4 Final or Tier 2 Equivalent emission standards.
Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS)
Lower your cost per ton utilizing advanced ICTC and RCS for modulated rimpull.
- Reduce tire slippage and wear by modulating rimpull from 100 to 25 percent while depressing left pedal. After 25 percent rimpull is achieved the left pedal applies the brake.
- Reduce the potential for wheel slippage without reducing hydraulic efficiency with RCS.
- Improve fuel efficiency in certain applications with our lock-up clutch torque converter providing direct drive.
Electro Hydraulic Controls
Operators increase productivity with our responsive implements feature.
- Operate comfortably through electronically controlled hydraulic cylinder stops.
- Handle easy-to-use soft detent controls.
Improve operator efficiency by matching the speed of the blade movement to your application.
- Three different speeds: Standard, Fine and Fast.
- Easily configured through the advisor display.
- Only affects blade raise and lower functions.
Confident loader operation starts with precise machine control enabled by the 844K's load sensing hydraulic steering system.
- Increase efficiency with our variable displacement piston pumps.
- Achieve precise positioning for easy loading in tight areas with 35 degrees of steering articulation.
- Enhance operator comfort with integrated steering and transmission control functions.
Benefit from extended performance and reliability of your hydraulic system with our advanced filtration system.
- Lift/tilt case drain filters.
- Lift/tilt high pressure screens.
- Steering case drain filters.
- Steering high pressure screens.
- Hydraulic case drain filters.
- Front pump drive lube filter.
- Front and rear brake oil screens.
Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.
Entry and Exit
Enter and exit the cab easily and safely with these newly designed, ergonomic features.
- Two side access points.
- Fold up STIC steer/arm rest.
- Reduced access stairway angles.
Cat Comfort Series III Seat
Enhance comfort and reduce operator fatigue with Cat Comfort Series III seat.
- High back design and extra thick, contoured cushions.
- Air suspension system.
- Easy-to-reach seat levers and controls for six way adjustments.
- Seat-mounted implement pod and STIC steer that moves with the seat.
- 76 mm (3 in) wide retractable seat belt.
Safely train other operators in comfort with our standard training seat.
- 76 mm (3 in) wide, retractable seat belt.
- Fold-down design with molded drink tray and storage.
Your operator's productivity is enhanced with our clean, comfortable cab environment.
- Experience reduced vibrations from viscous cab mounts and seat air suspension.
- Maintain desired cab temperature with automatic temperature controls.
- Pressurized cab with filtered air.
- Sound level reduced to a quiet 69 dB(A).
- Convenient floor storage tray/lunch box.
The 844K electronic systems have been completely integrated to function as one machine. This integration creates a smart machine and more informed operator, maximizing the productivity of both.
We have worked hard to help our customers and operators perform at their best through our Vital Information Management System (VIMS 3G).
- Easy-to-view Advisor Display features a large screen.
- Intuitive operation and easy navigation with our enhanced user interface.
- Decrease service time by keeping operators informed about machine system malfunction or operation.
Operator comfort begins with personalized machine feature settings. Through our Advisor Display, an operator can instantly recall personalized profiles.
- Store up to 10 separate operator profiles through Advisor.
- Decrease setup time between operators by recalling personalized screen layouts.
Cat MineStar System is the industry's broadest suite of integrated mine operations and mobile equipment management technologies, configurable to suit your operation's needs. Its capability sets - Fleet, Terrain, Detect, Health and Command - contain a range of technologies that let you manage everything from fleet assignment and condition monitoring to remote and autonomous control. The 844K can take advantage of many of these advanced technologies, some of which are standard out of the factory.
Fleet provides comprehensive, real-time machine tracking, assignment and productivity management, giving you a comprehensive overview of all operations from anywhere in the world.
Terrain for Loading
Terrain with your 844K enables high-precision management of loading operations through the use of guidance technology. It increases 844K's productivity and provides you real-time feedback for improved efficiency.
Detect helps increase operator awareness, enhancing safety at your operation. It includes a range of capabilities designed to assist the operator with areas of limited visibility around fixed and mobile equipment.
Health delivers critical event-based machine condition and operating data for your entire fleet. It includes comprehensive equipment health and asset monitoring capabilities, with a wide range of diagnostic, analytic and reporting tools.
We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.
- Wider stairs with reduced stair angles increase safety for operators getting on and off the 844K.
- Walkways with non-skid surfaces and integrated lock out/tag out points are designed into the service areas.
- Windshield cleaning platforms provide safe and convenient access for the operator.
- Maintain three points of contact at all times through ground level or platform accessible service areas.
- Emergency egress access.
- Optional pull-down window shade and optional heated mirrors ensure extended visibility for safe operation.
- Cat Detect with Object Detection System (rearview camera and radar) or Vision (rearview camera) option increases operator awareness around the machine.
- Standard HID lights provide excellent workspace visibility.
- Cab mounted LED warning beacons.
- Low vibrations to the operator with viscous cab mounts and seat air suspension.
- Low interior sound levels.
- Operator training seat facilitates safe new operator training.
- Standard 76 mm (3 in) seat belts on the operator seat and operator training seat.
Powered Access System
The Cat powered access system allows easier access to the primary stairs by improving ingress and egress to and from the rear platform.
- Safe, ergonomic access system.
- All operators have adequate space when using the wide stairway.
- Operators maintain three-point contact when using full handrails on each side.
- Raise lower platform from cab level or ground.
- Occupants can quickly exit with a conveniently located emergency release valve if the loader becomes inoperable.
We can help you succeed by ensuring your 844K has design features to reduce your downtime.
- Longer service intervals on fluids and filters.
- Safe and convenient service with ground level or platform access and grouped service points.
- Swing-out doors on both sides of the engine compartment provide easy access to important daily service checks.
- Ecology drains for ease of service and prevention of spilling potential environmental contaminants.
- Centralized remote pressure taps.
- Reduce downtime with VIMS system notifications so your operators and technicians can resolve any problems before failure.
Legendary Cat Dealer Support
A valued partner, your Cat dealer is available whenever you need them.
- Preventive maintenance programs and guaranteed maintenance contracts.
- Best-in-class parts availability.
- Improve your efficiency with operator training.
- Genuine Cat Remanufactured parts.
Sustainability is designed and built into our 844K's features.
- Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
- Reduce waste to the environment with our maintenance free batteries.
- The 844K is built for multiple lives. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost.
- Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. And, when you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.
Maximize your productivity with the right blade for your dozer application.
- High strength, pressed rib construction.
- Large Cat Track-Type Tractor bolt on cutting edges and bottom wear plates.
- Optimized widths and capacities for excellent dozing and rolling characteristics.
• Increase your productivity with a Cat coal blade designed to retain load control and a large capacity for lighter materials.
Featuring the characteristics of the S and U blades into one package for increased capacity while retaining excellent spreading characteristics of a straight blade.
For unmatched durability in high wear applications the Semi-U blade feature:
- Hardox 400 Liner plate and side plates
- Additional reinforcements on the bottom of the blade
- Air conditioner and heater with automatic temperature control
- Cab, sound-suppressed pressurized, protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp)
- 12V power port for mobile phone or laptop connection
- Camera, rear vision
- Cigar lighter and ashtray
- Coat hook
- Electro-hydraulic blade controls (seat mounted)
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Implement hydraulic lockout
- Instrumentation, gauges: - Engine coolant temperature - Fuel level - Ground speed - Gear - Hydraulic oil temperature - Speedometer/tachometer - Torque converter temperature
- Instrumentation, warning indicators: - Action alert system, three category - Automatic transmission model enable status - Brake malfunction - Bucket float status - Delayed engine shutdown status - Engine idle shutdown status - Engine malfunction - Fuel economy mode enable status - Hydraulic lockout - Lockup clutch enable status - Low fuel level - Parking brake status - Rimpull control enable status - Seatbelt warning - Secondary steering (if equipped) - Throttle lock status - Transmission gear
- Keypad, control with indicator lights: - Auto trans mode speed range - Auto/manual transmission mode - Lockup clutch - Reduced rimpull - Throttle lock
- Light, dome (cab)
- Lunchbox and beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat comfort (cloth) air suspension
- Seat belt, retractable, 76 mm (3 in) wide
- STIC control system with steering lock
- Tinted glass
- Trainer seat with lap belt
- Vital Information Management System (VIMS) 3G with graphical information display: external data port, customizable operator profiles
- Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
- Brakes, full hydraulic, enclosed, oil-disc
- Axle-shaft oil-disc service brake
- Electro hydraulic parking brake
- Case drain filters
- Cat clean emission module (Tier 4 only)
- Demand fan
- Engine Cat C27
- Fuel priming pump (electric)
- Ground level engine shutoff, bumper
- Mufflers (under hood) (Tier 2 only)
- Precleaner, engine air intake
- Radiator, Aluminum Modular (AMR)
- Separated cooling system
- Starting aid, (ether) manual override
- Throttle Lock
- Torque Converter, Impeller Clutch with lock-up clutch feature and rimpull control system
- Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance free (2 - 1,400 CCA)
- Converter, 10/15 amp, 24V to 12V
- Deutsch component connectors
- Electrical system, 24V
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
- Starter, electric
- Starter lockout in bumper
- Starting receptacle for emergency start
- Transmission lockout in bumper
- Axle temperature sensor
- Battery disconnect and jump start receptacle, bumper
- Coupling, Caterpillar O-ring face seals
- Economy mode with on demand throttle
- Emergency platform egress
- Engine, crankcase, 500 hour interval with CH4
- Engine idle management features: - Auto idle kickdown - Delayed engine shutdown - Engine idle shutdown
- Fenders, steel (front)
- Guards, crankcase and power train
- Grouped/labeled lube points
- Hitch, drawbar with pin
- Hoses, Cat XT
- Oil sampling valves
- Positive flow control hydraulic system
- Product Link™
- Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
- Stairway, left and right rear access
- Steering, load sensing
- Steering, secondary
- Toe kicks
- Vandalism protection caplocks
- Venturi stack
- Premixed 50% concentration of extended life coolant with freeze protection to -34° C (-29° F)
- 50° C (-58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine block heater 120V or 240V
- High ambient cooling - software
- Semi-U - 17.8 m3 (23.3 yd3)
- HD Semi-U - 16.1 m3 (21.1 yd3)
- Coal - 30.7 m3 (40.2 yd3)
- Cab precleaner
- AM/FM/CD/MP3 radio
- Satellite Sirius radio with Bluetooth
- LED warning strobe
- CB radio ready
- Window sun shade
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- Axle oscillation stop
- Paint, black blade rear