910M Compact Wheel Loader

M Series Compact Wheel Loaders at Work M Series Compact Wheel Loaders at Work
Cat® Compact and Small Wheel Loaders in Action Cat® Compact and Small Wheel Loaders in Action
Operator Comfort | Cat® M Series Compact Wheel Loader Operating Tips Operator Comfort | Cat® M Series Compact Wheel Loader Operating Tips
Machine Controls | Cat® M Series Compact Wheel Loader Operating Tips Machine Controls | Cat® M Series Compact Wheel Loader Operating Tips
Efficient Hystat Operation | Cat® M Series Compact Wheel Loader Operating Tips Efficient Hystat Operation | Cat® M Series Compact Wheel Loader Operating Tips
Preventative Maintenance | Cat® 910M-914M-918M Wheel Loader Operating Tips Preventative Maintenance | Cat® 910M-914M-918M Wheel Loader Operating Tips
Rim Pull | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips Rim Pull | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips
Throttle Lock | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips Throttle Lock | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips
Customize Your Experience | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips Customize Your Experience | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips
Hydro-Mechanical Work Tools | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips Hydro-Mechanical Work Tools | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips
Creeper Control | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips Creeper Control | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips
Ride Control | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips Ride Control | Cat® 906M-907M-908M-910M-914M-918M Compact Wheel Loader Operating Tips
Request Info

SPECS SUMMARY

Maximum Gross Power100 HP (74 kW)
Operating Weight17893 lb (8116 kg)
Bucket Capacities1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
Rated Bucket Capacity2.5 yd³ (1.9 m³)
The Cat® 910M Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a toolcarrier.

Specifications

Maximum Gross Power100 HP (74 kW)
Operating Weight17893 lb (8116 kg)
Bucket Capacities1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
Rated Bucket Capacity2.5 yd³ (1.9 m³)
Net Power97 HP (72 kW)
ROPSISO 3471:2008
FOPSISO 3449:2005 Level II
Cooling System5.7 gal (US) (21.5 l)
Fuel Tank40.7 gal (US) (154 l)
Hydraulic Cycle Time - Total Cycle Time12.5 s (12.5 s)
Other Choices Include15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift5.2 s (5.2 s)
Maximum Flow - Steering Pump17 gal/min (66 l/min)
Axles - Front Center Differential2 gal (US) (7.5 l)
Rated Net Power - ISO 924997 HP (72 kW)
Maximum Working Pressure - Steering Pump2683 psi (18500 kPa)
Maximum Gross Torque - SAE J1995336 ft·lbf (455 N·m)
Maximum Net Torque - SAE J1349325 ft·lbf (441 N·m)
Hydraulic Cycle Time - Rackback2.2 s (2.2 s)
Note (4)*The measurements were conducted with the cab doors and windows closed.
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left3.75 turns (3.75 turns)
Forward and Reverse - Low Range, Speed Range 2*12.5 mile/h (20 km/h)
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level3.7 s (3.7 s)
Note (3)The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
NoteNet power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Displacement268 in³ (4.4 l)
Forward and Reverse - High Range25 mile/h (40 km/h)
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow24 gal/min (90 l/min)
Maximum Flow - Implement Pump - 4th Function, Maximum Flow24 gal/min (90 l/min)
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure3046 psi (21000 kPa)
Note (2)In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Transmission0.9 gal (US) (3.4 l)
Note (1)Other tire choices are available. Contact your Cat dealer for details.
RearOscillating �11 degrees; Locking differential (Standard)
Standard Size15.5-25 12PR
Rated Net Power - ISO 9249 (DIN)98 HP (72 kW)
Maximum Gross Torque - ISO 14396332 ft·lbf (450 N·m)
Hydraulic Tank14.5 gal (US) (55 l)
Maximum Flow - Implement Pump32 gal/min (122 l/min)
Rated Net Power - Rated Engine Speed2200 r/min (2200 r/min)
Maximum Gross Power - ISO 14396 (DIN)101 HP (74 kW)
Maximum Gross Power - ISO 14396100 HP (74 kW)
Maximum Gross Power - Maximum Engine Speed2350 r/min (2350 r/min)
Engine ModelCat C4.4 ACERT�
Maximum Gross Power - SAE J1995102 HP (76 kW)
Hydraulic System - Including Tank25.9 gal (US) (98 l)
Engine Crankcase2.3 gal (US) (8.8 l)
Diesel Exhaust Fluid (DEF) Tank5 gal (US) (18.9 l)
Hydraulic Cycle Time - Dump, at Maximum Reach1.4 s (1.4 s)
EmissionsEngine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Relief Pressure - Tilt Cylinder4931 psi (34000 kPa)
NoteDEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed3.2 s (3.2 s)
Note*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Stroke5 in (127 mm)
Steering Articulation Angle - Each Direction40 ° (40 °)
Maximum Working Pressure - Implement Pump3408 psi (23500 kPa)
Maximum Net Torque - ISO 9249329 ft·lbf (446 N·m)
FrontFixed; Locking differential (standard)
Axles - Rear Center Differential2 gal (US) (7.5 l)
Bore4.13 in (105 mm)
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure3046 psi (21000 kPa)
Rated Net Power - SAE J134996 HP (72 kW)
Forward and Reverse - Low Range, Speed Range 1*6.3 mile/h (10 km/h)
Note (3)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).

Benefits and Features

With high full turn tipping loads, powerful breakout forces and increased engine power the M Series delivers a balanced solution for all customer applications.

The Cat® Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control. Multi-function work has never been easier with dedicated pumps for each system, allowing the operator to simultaneously lift, steer and drive without compromise.

A spacious, safe, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with a pillarless front windshield, clean hydraulic linesrouting as well as in-line engine mounting for excellent rear visability. Electro-hydraulic controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Climate controlled cab with heated rear glass
  • Information at a glance with large LCD display on front console
  • Heated seat option for added comfort
  • Exclusive electro-hydraulic cylinder snubbing
  • An extra eye on the job site with optional* rearview camera capability

*Standard in Europe.

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.