926M Aggregate Handler

M Series Small Wheel Loaders | At Work M Series Small Wheel Loaders | At Work
M Series Small Wheel Loaders | Overview M Series Small Wheel Loaders | Overview
Built in Quality: Cat® Small Wheel Loaders Manufactured in Clayton, NC Built in Quality: Cat® Small Wheel Loaders Manufactured in Clayton, NC
Safety and Service Overview | Cat® 926M, 930M, 938M Small Wheel Loader Safety and Service Overview | Cat® 926M, 930M, 938M Small Wheel Loader
Kick-Outs, Snubbing, Wrap-Out and Soft Detents | M Series Small Wheel Loader Operator Tips Kick-Outs, Snubbing, Wrap-Out and Soft Detents | M Series Small Wheel Loader Operator Tips
Secondary Display Navigation | M Series Small Wheel Loader Operator Tips Secondary Display Navigation | M Series Small Wheel Loader Operator Tips
Preventative Maintenance | M Series Small Wheel Loader Operator Tips Preventative Maintenance | M Series Small Wheel Loader Operator Tips
Coded Start Feature/Individual Operator Profiles | M Series Small Wheel Loader Operator Tips Coded Start Feature/Individual Operator Profiles | M Series Small Wheel Loader Operator Tips
Creeper Control | M Series Small Wheel Loader Operator Tips Creeper Control | M Series Small Wheel Loader Operator Tips
Rim Pull | M Series Small Wheel Loader Operator Tips Rim Pull | M Series Small Wheel Loader Operator Tips
Efficient Hystat Operation | M Series Small Wheel Loader Operator Tips Efficient Hystat Operation | M Series Small Wheel Loader Operator Tips
Throttle Lock | M Series Small Wheel Loader Operator Tips Throttle Lock | M Series Small Wheel Loader Operator Tips
Fine Mode Control and Perfect Parallelism | M Series Small Wheel Loader Operator Tips Fine Mode Control and Perfect Parallelism | M Series Small Wheel Loader Operator Tips
Quick Steer | M Series Small Wheel Loader Operator Tips Quick Steer | M Series Small Wheel Loader Operator Tips
Power Train Modes | M Series Small Wheel Loader Operator Tips Power Train Modes | M Series Small Wheel Loader Operator Tips
Cab Controls and Features | M Series Small Wheel Loader Operator Tips Cab Controls and Features | M Series Small Wheel Loader Operator Tips
Hydro-mechanical Applications | M Series Small Wheel Loader Operator Tips Hydro-mechanical Applications | M Series Small Wheel Loader Operator Tips
Third and Fourth Auxiliary Flow | M Series Small Wheel Loader Operator Tips Third and Fourth Auxiliary Flow | M Series Small Wheel Loader Operator Tips
Reversing Fan | M Series Small Wheel Loader Operator Tips Reversing Fan | M Series Small Wheel Loader Operator Tips
Customize Your Experience | M Series Small Wheel Loader Operator Tips Customize Your Experience | M Series Small Wheel Loader Operator Tips
Diesel Exhaust Fluid (DEF) Fill Alarm | M Series Small Wheel Loader Operator Tips Diesel Exhaust Fluid (DEF) Fill Alarm | M Series Small Wheel Loader Operator Tips
Cat® Production Measurement (CPM) | M and K Series Small Wheel Loader Operator Tips Cat® Production Measurement (CPM) | M and K Series Small Wheel Loader Operator Tips
Cat® Production Measurement (CPM) Updates | M and K Series Small Wheel Loader Operator Tips Cat® Production Measurement (CPM) Updates | M and K Series Small Wheel Loader Operator Tips
Differential Lock | M Series Small Wheel Loader Operator Tips Differential Lock | M Series Small Wheel Loader Operator Tips
Tire Pressure Monitoring System | M Series Small Wheel Loader Operator Tips Tire Pressure Monitoring System | M Series Small Wheel Loader Operator Tips
Tire Pressure Monitoring System Updates | M Series Small Wheel Loader Operator Tips Tire Pressure Monitoring System Updates | M Series Small Wheel Loader Operator Tips
Engine Idle Shutdown | M and K Series Small Wheel Loader Operator Tips Engine Idle Shutdown | M and K Series Small Wheel Loader Operator Tips
Continuously Adjustable Creep Mode | M and K Series Small Wheel Loader Operator Tips Continuously Adjustable Creep Mode | M and K Series Small Wheel Loader Operator Tips
Operator ID and Machine Security | M and K Series Small Wheel Loader Operator Tips Operator ID and Machine Security | M and K Series Small Wheel Loader Operator Tips

SPECS SUMMARY

Engine ModelCat® C7.1 ACERT™
Maximum Rated Gross Power - ISO 14396153 HP (114 kW)
Maximum Rated Gross Power - ISO 14396 (DIN)155 HP (114 kW)
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)155 HP (114 kW)
The Cat 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.


Specifications

Engine ModelCat® C7.1 ACERT™
Maximum Rated Gross Power - ISO 14396153 HP (114 kW)
Maximum Rated Gross Power - ISO 14396 (DIN)155 HP (114 kW)
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)155 HP (114 kW)
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)153 HP (114 kW)
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)1800 r/min (1800 r/min)
Rated Net Power148 HP (110 kW)
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)149 HP (111 kW)
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)148 HP (110 kW)
Bucket Capacities2.5 m3 (3.3 yd3)
Operating Weight28933 lb (13128 kg)
Maximum Gross Power153 HP (114 kW)
Bore4 in (105 mm)
Stroke5 in (135 mm)
Displacement427 in³ (7.01 l)
ROPSISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Declared Sound Levels– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note (1)* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Note (2)The Blue Angel environmental label is an optional attachment for Europe only.
EmissionsEngine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)531 ft·lbf (721 N·m)
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)531 ft·lbf (721 N·m)
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)517 ft·lbf (702 N·m)
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)517 ft·lbf (702 N·m)
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)511 ft·lbf (694 N·m)
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)511 ft·lbf (694 N·m)
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)148 HP (109 kW)
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)146 HP (109 kW)
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)1600 r/min (1600 r/min)
Note (1)* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2)Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3)No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4)Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)142 HP (106 kW)
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)144 HP (106 kW)
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)141 HP (105 kW)
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)151 HP (111 kW)
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)2.6/2.6 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)5.5/6.2 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time9.6/10.5 seconds
Lift Cylinder, Double Acting - Bore Diameter4.3 in (110 mm)
Lift Cylinder, Double Acting - Rod Diameter2.4 in (60 mm)
Lift Cylinder, Double Acting - Stroke28.7 in (728 mm)
Maximum Flow - Implement Pump40 gal/min (150 l/min)
Maximum Flow - Implement Pump - 3rd Function*40 gal/min (150 l/min)
Maximum Working Pressure - Implement Pump3771 psi (26000 kPa)
Note (1)Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Note (3)* 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Relief Pressure - Tilt Cylinder4061 psi (28000 kPa)
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure3771 psi (26000 kPa)
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure4061 psi (28000 kPa)
Tilt Cylinder, Double Acting - Bore Diameter5.1 in (130 mm)
Tilt Cylinder, Double Acting - Rod Diameter2.8 in (70 mm)
Tilt Cylinder, Double Acting - Stroke21.9 in (555 mm)
Full Turn Tip Load17580 lb (7976 kg)
Brakes - ParkingSpring applied hydraulically released
Brakes - ServiceInboard wet disc
Front AxleFixed
Front Axle - Traction Aid**Locking differential (standard)
Note (1)Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2)Offset rims available to meet European roading requirements.
Note (3)**Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Rear AxleOscillating
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25± 13.5 degrees
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65± 10.5 degrees
Rear Axle - Traction Aid - OptionalLimited slip differential
Cooling System7.9 gal (US) (30 l)
Diesel Exhaust Fluid (DEF) Tank5 gal (US) (19 l)
Engine Crankcase5.3 gal (US) (20 l)
Front Axles5.5 gal (US) (21 l)
Fuel Tank51.5 gal (US) (195 l)
Hydraulic System - Including Tank42.3 gal (US) (160 l)
Hydraulic Tank23.8 gal (US) (90 l)
Rear Axles5.5 gal (US) (21 l)
Transmission - Gear Box2.2 gal (US) (8.5 l)
Maximum Flow - Steering Pump34 gal/min (130 l/min)
Maximum Steering Torque - 0° (Straight Machine)37155 ft·lbf (50375 N·m)
Maximum Steering Torque - 40° (Full Turn)27747 ft·lbf (37620 N·m)
Maximum Working Pressure - Steering Pump3500 psi (24130 kPa)
Note (1)Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed2.4 s (2.4 s)
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited2.8 s (2.8 s)
Steering Cylinder, Double Acting - Bore Diameter2.8 in (70 mm)
Steering Cylinder, Double Acting - Rod Diameter1.6 in (40 mm)
Steering Cylinder, Double Acting - Stroke17.2 in (438 mm)
Forward and Reverse - Range 1*1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 28 mile/h (13 km/h)
Forward and Reverse - Range 317 mile/h (27 km/h)
Forward and Reverse - Range 425 mile/h (40 km/h)
Note* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Benefits and Features

Increased Payload

Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

Long Life Sand and Gravel Buckets

Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

Protect your Power Train

Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

Work as one with your machine by customizing the controls.

Flexible Power Train

A smooth, stepless electronically controlled hydrostatic transmission provides adjustable power to the ground with excellent groundspeed control and customizable feel.

  • Select your Power Train Mode: – Torque Converter (TC) for smooth rollout. – Hystat for aggressive engine braking. – Default mode which blends the best of Hystat and Torque Converter characteristics.
  • Reduce tire wear using Rimpull control which enables you to match available tractive power to underfoot conditions.
  • Set Directional Shift Response, soft and smooth for material handling applications or sharp for aggressive operation.

Adjustable Electro Hydraulic Controls

Easily customize the hydraulic performance through secondary display to optimize your efficiency.

  • Optimize hydraulic modulation with Fine Mode control when working with forks.
  • Quicker hydraulic response for fine grading at speed and quick functions through Lift and Tilt response settings.
  • Fully adjustable ride control activation speed along with 3rd function auxiliary flow for powering a broom.

Operator Profiles and Coded Start

  • The M Series Wheel Loaders remember your personal settings with unique operator codes to make this machine truly yours and keep it secure on the job site.

Intelligent Power Management

The Caterpillar exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency.

Power on Demand

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with increased hydraulic speed to get your job done faster.

Standard Power Mode

  • Saves up to 10% fuel while running at an efficient 1,600 rpm.
  • Recommended for load and carry to maximize fuel efficiency.
  • Power-by-range logic increases power in speed Range 4 automatically to maximize travel speed and grade climbing performance.
  • Reduces cab sound levels down to a whisper quiet 64 dB(A) typical.

Performance Power Mode

  • Enabled at the push of a button (HP+)
  • Boosts engine power by up to 10% in all speed ranges.
  • Boosts engine speed by over 12%.
  • Increases hydraulic cycle times and productivity.

Six Cylinders of Efficient Power

The Cat C7.1 ACERT engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. The engine meets Tier 4 Final and Stage IV emission standards with a Clean Emissions Module that is designed to manage itself so you can concentrate on your work.

  • No downtime for regeneration with a passive low temperature system that keeps you on the job.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Extended fluid fill intervals with minimal use of Diesel Exhaust Fluid (DEF) with up to four fuel tank fills per DEF fill.
  • Configurable auto idle shut down based on time and ambient temperature to further reduce fuel burn and keep operating costs low.
  • Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Power to the Ground

Lock up and go with fully locking front differential axles that can be engaged on the move at full torque with the pull of a trigger on the seat mounted joystick. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Independent service brakes on front and rear axles provide robust stopping performance while a push button electronic park brake allows you to safely secure the machine with ease.

Optimized Z-bar Linkage

The Caterpillar patented and optimized Z-bar linkage combines the digging efficiency of a traditional Z-bar with integrated tool carrier capabilities for great performance and versatility.

  • Perfect Parallelism functionality available in Fork Mode gives truly predictable performance while high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
  • Visibility to bucket corners and fork tips at ground level remain excellent while sight lines at maximum lift are improved with a Generation II lift arm design.

Quick Loading, Performance Series Buckets

Performance Series Sand and Gravel Buckets deliver up to 10% higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention. Wear plates on the sides and bottom maximize bucket life in abrasive aggregate rehandling applications.

Smooth and Predictable Multi-Function Performance

M Series machines feature an electro-hydraulic control system that is governed by the Intelligent Power Management system for peak efficiency. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match the operators request.

  • Multi-Function without compromise through Caterpillar's exclusive dedicated hydraulic systems featuring three pumps. – 1st pump for Intelligent Hydrostatic drive – 2nd pump for implements – 3rd pump for steering system
Drive, lift and steer simultaneously with smooth, predictable control. The M Series simply does what you ask it to.
  • Programmable in-cab kick-outs are easy to set on the go for tilt, lower and lift. This feature is ideal for applications where the work cycle is repeatable allowing you to quickly return to programmed set points maximizing cutting edge life.
  • Fine tune hydro-mechanical performance with fully adjustable 3rd function flow through the secondary display (when equipped) for a perfect marriage between machine and attachments.

Have a Seat and Experience:

  • Seat-mounted controls featuring a low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.
  • Superior all around visibility with single piece front windshield, new parabolic external mirrors, redesigned Generation II linkage and clean hydraulic lines routing.
  • Automatic climate control with heated rear glass and external mirrors for a quick defrost.
  • Fully adjustable controls including steering column, joystick and seat suspension.
  • Information at a glance with large primary LCD display and full color secondary display.
  • An extra eye on the job site with rear view camera and optional integrated rear object detection.
  • A heated and cooled seat option for added comfort in a wide range of climates.

An easy day at work with:

  • A spacious, safe, quiet operator environment featuring ergonomic controls, seat belt notification and optional Bluetooth radio with integrated microphone plus an auxiliary port.
  • Easy access to vital machine parameters with the optional secondary display, working in conjunction with the standard soft touch panel to allow real time adjustments to machine features and an integrated help button with over 25 languages.
  • Comfortable soft stops at cylinder end stroke conditions and programmable kickout points with Caterpillar's exclusive electro-hydraulic cylinder snubbing.
  • An even smoother ride with optional Ride Control when working unloaded and loaded with excellent material retention.
  • Early starts and late finishes are made easier with optional LED lighting package that includes engine compartment lighting to illuminate the way for checking oil, and coolant level along with refueling the machine in dark conditions.

The Way You Want It

A complete range of optional equipment and work tools give you the versatility to configure an Aggregate Handler to be successful in your business. Get with your Cat dealer to configure yours.

Guards:

  • Lights
  • Drive shaft
  • Side power train
  • Lower power train
  • Crank case

Debris Packages:

  • Elevated breathers: axles and gear box
  • Reversing fan
  • Sealed alternator
  • Turbine precleaner

Operator Environment:

  • Seat, deluxe or premium
  • Quick steer
  • Deluxe cab (with display)

Work Tools

  • Full range of tools

Other Options:

  • Autolube
  • Coupler: Fusion™ and ISO
  • Auxiliary hydraulics: 3rd and 4th
  • Windshield washing platform
  • Ride Control
  • Fenders: extended and full coverage
  • Aggregate weight set
  • Cold start package
  • Rear object detection
  • Blue Angel certification
  • Beacon
  • LED auxiliary lights

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

  • Product Link™ PRO standard with three year subscription to VisionLink®.
  • Maintenance reminders through secondary display at scheduled intervals.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Extended cleanouts with single plane cooling system and wide spaced 6 fins per inch coolers as standard.
  • Integrated Autolube (optional) with adjustable greasing frequency.

Renowned Cat Dealer Support

Rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Standard Equipment

  • Axle seal guards
  • Automatic lift, lower and tilt kickouts
  • Alternator, 115-amp, heavy duty
  • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
  • Large-access enclosure doors

Optional Equipment

  • Automatic blower control
  • Ether starting aid, block heater and additional batteries 1,000 CCA (4 in total)
  • Power train, (lower, side, driveshaft and crankcase)
  • Radio ready with Bluetooth
  • Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
  • Dual mode and Secondary
  • Bias ply, 17.5, 20.5-25