| -Maximum Gross Power | 153 mm H2O (114 kg/mm) |
| -Operating Weight | 31240 lb (14175 null) |
| -Bucket Capacities | 3.0-5.0 m3 (3.9-6.5 yd3) |
| -Bore | 4 in (105 mm) |
| -Stroke | 5 in (135 mm) |
| -Displacement | 427 in³ (7.01 l) |
| -ROPS | ISO 3471: 2008 |
| -FOPS | ISO 3449: 2005 LEVEL II |
| -Rear Axle | Oscillating |
| -Note (3) | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M. |
| -Note (2) | Offset rims available to meet European roading requirements. |
| -Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 | ± 13.5 degrees |
| -Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | ± 10.5 degrees |
| -Engine Crankcase | 5.3 gal (US) (20 l) |
| -Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) (19 l) |
| -Cooling System | 7.9 gal (US) (30 l) |
| -Rear Axle - Traction Aid (Optional) | Limited slip differential |
| -Note (1) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
| -Front Axle | Fixed |
| -Tilt Cylinder, Double Acting - Bore Diameter | 5.1 in (130 mm) |
| -Tilt Cylinder, Double Acting - Rod Diameter | 2.8 in (70 mm) |
| -Tilt Cylinder, Double Acting - Stroke | 21.9 in (555 mm) |
| -Full Turn Tip Load | 16257 lb (7376 null) |
| -Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure | 4061 psi (28000 kPa) |
| -Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure | 3771 psi (26000 kPa) |
| -Brakes - Parking | Spring applied hydraulically released |
| -Brakes - Service | Inboard wet disc |
| -Front Axles | 5.5 gal (US) (21 l) |
| -Front Axle - Traction Aid* | Locking differential (standard) |
| -Transmission - Gear Box | 2.2 gal (US) (8.5 l) |
| -Steering Cylinder, Double Acting - Stroke | 17.2 in (438 mm) |
| -Steering Cylinder, Double Acting - Rod Diameter | 1.6 in (40 mm) |
| -Steering Cylinder, Double Acting - Bore Diameter | 2.8 in (70 mm) |
| -Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | 2.8 s (2.8 s) |
| -Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
| -Forward and Reverse - Range 2 | 8 mile/h (13 km/h) |
| -Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph). |
| -Forward and Reverse - Range 4 | 25 mile/h (40 km/h) |
| -Forward and Reverse - Range 3 | 17 mile/h (27 km/h) |
| -Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | 2.4 s (2.4 s) |
| -Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| -Relief Pressure - Tilt Cylinder | 4061 psi (28000 kPa) |
| -Rear Axles | 5.5 gal (US) (21 l) |
| -Hydraulic Tank | 23.8 gal (US) (90 l) |
| -Hydraulic System - Including Tank | 42.3 gal (US) (160 l) |
| -Maximum Flow - Steering Pump | 34 gal/min (130 l/min) |
| -Maximum Steering Torque - 0° (Straight Machine) | 37155 ft·lbf (50375 N·m) |
| -Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
| -Maximum Working Pressure - Steering Pump | 3500 psi (24130 kPa) |
| -Maximum Steering Torque - 40° (Full Turn) | 27747 ft·lbf (37620 N·m) |
| -Fuel Tank | 51.5 gal (US) (195 l) |
| -Maximum Flow - Implement Pump - 3rd Function* | 40 gal/min (150 l/min) |
| -Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4) | 517 ft·lbf (702 N·m) |
| -Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 531 ft·lbf (721 N·m) |
| -Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) | 531 ft·lbf (721 N·m) |
| -Emissions | Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
| -Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*) | 517 ft·lbf (702 N·m) |
| -Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) | 511 ft·lbf (694 N·m) |
| -Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | 146 mm H2O (109 kg/mm) |
| -Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) | 148 mm H2O (109 kg/mm) |
| -Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 511 ft·lbf (694 N·m) |
| -Note (2) | The Blue Angel environmental label is an optional attachment for Europe only. |
| -Note (1) | *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows clo |
| -Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) | 153 mm H2O (114 kg/mm) |
| -Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4) | 155 mm H2O (114 kg/mm) |
| -Maximum Rated Gross Power - ISO 14396 (DIN) | 155 mm H2O (114 kg/mm) |
| -Maximum Rated Gross Power - ISO 14396 | 153 mm H2O (114 kg/mm) |
| -Maximum Rated Gross Power - Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4) | 1800 r/min (1800 r/min) |
| -Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) | 149 mm H2O (111 kg/mm) |
| -Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* | 68 dB(A) (68 dB(A)) |
| -Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* | 101 dB(A) (101 dB(A)) |
| -Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) | 148 mm H2O (110 kg/mm) |
| -Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | 1600 r/min (1600 r/min) |
| -Note (1) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
| -Lift Cylinder, Double Acting - Stroke | 28.7 in (728 mm) |
| -Lift Cylinder, Double Acting - Rod Diameter | 2.4 in (60 mm) |
| -Lift Cylinder, Double Acting - Bore Diameter | 4.3 in (110 mm) |
| -Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | 9.6/10.5 seconds |
| -Maximum Flow - Implement Pump | 40 gal/min (150 l/min) |
| -Engine Model | Cat® C7.1 ACERT™ |
| -Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
| -Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
| -Maximum Working Pressure - Implement Pump | 3771 psi (26000 kPa) |
| -Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | 5.5/6.2 seconds |
| -Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | 2.6/2.6 seconds |
| -Note (4) | Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test). |
| -Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| -Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| -Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 142 mm H2O (106 kg/mm) |
| -Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 144 mm H2O (106 kg/mm) |
| -Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | 1.5/1.7 seconds |
| -Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) | 151 mm H2O (111 kg/mm) |
| -Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 141 mm H2O (105 kg/mm) |
| -Note (3) | *3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped. |
