SPECS SUMMARY

Maximum Gross Power164 mm H2O (122 kg/mm)
Operating Weight31876 lb (14459 null)
Bucket Capacities3.1-5.0 m3 (4.0-6.5 yd3)
N


Specifications

-Maximum Gross Power164 mm H2O (122 kg/mm)
-Operating Weight31876 lb (14459 null)
-Bucket Capacities3.1-5.0 m3 (4.0-6.5 yd3)
-ROPSISO 3471:2008
-FOPSISO 3449:2005 Level II
-Rated Net Power - 1,800 rpm - ISO 9249 (DIN) (Performance Power Mode: Speed Range 1-4)162 mm H2O (119 kg/mm)
-Rated Net Power - 1,800 rpm - SAE J1349 (Performance Power Mode: Speed Range 1-4)157 mm H2O (117 kg/mm)
-Note (3)*Range 4 power is boosted to be the same as Performance Mode.
-Note (2)Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
-Maximum Net Torque - SAE J1349 (Performance Power Mode; Speed Range 1-4)566 ft·lbf (768 N·m)
-Maximum Net Torque - SAE J1349 (Standard Power Mode; Speed Range 1-3*)566 ft·lbf (768 N·m)
-Note (1)Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
-Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4)143 mm H2O (107 kg/mm)
-Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level1.8 s (1.8 s)
-Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level1.8 s (1.8 s)
-Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift4.3 s (4.3 s)
-Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time7.5 s (7.5 s)
-Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift4.8 s (4.8 s)
-Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time8.2 s (8.2 s)
-Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height1.6 s (1.6 s)
-Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*)572 ft·lbf (776 N·m)
-Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height1.4 s (1.4 s)
-Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)1800 r/min (1800 r/min)
-Turning Radius - Over Bucket21.92 ft (6427 mm)
-Width - Bucket9 ft (2750 mm)
-Width - Over Tires8.33 ft (2540 mm)
-Turning Radius - Outside of Tires17.67 ft (5402 mm)
-Turning Radius - Inside of Tires9.33 ft (2851 mm)
-Tipping Load - Full Turn - ISO 14397-1*13592 lb (6166 null)
-Tipping Load - Straight - ISO 14397-1*16070 lb (7290 null)
-Width - Tread Center6.25 ft (1930 mm)
-Displacement (Performance Power Mode: Speed Range 1-4)427 in³ (7.01 l)
-Maximum Flow - Implement Pump50 gal/min (190 l/min)
-Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)592 ft·lbf (804 N·m)
-Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)592 ft·lbf (804 N·m)
-Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)164 mm H2O (122 kg/mm)
-Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)166 mm H2O (122 kg/mm)
-Displacement (Standard Power Mode: Speed Range 1-3*)427 in³ (7.01 l)
-EmissionsEngine meets Tier 4 Final emission standards.
-Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4)572 ft·lbf (776 N·m)
-Maximum Working Pressure - Implement Pump4061 psi (28000 kPa)
-Steering Articulation Angle - Each Direction40°
-Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed2.4 s (2.4 s)
-Note (1)Other tire choices are available. Contact your Cat dealer for details.
-Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left3.5 turns (3.5 turns)
-Maximum Working Pressure - Steering Pump3500 psi (24130 kPa)
-Maximum Steering Torque - 0° (Straight Machine)37155 ft·lbf (50375 N·m)
-Maximum Steering Torque - 40° (Full Turn)27747 ft·lbf (37620 N·m)
-Note (2)In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
-Note (3)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
-Forward and Reverse - Range 317 mile/h (27 km/h)
-Forward and Reverse - Range 425 mile/h (40 km/h)
-Note*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
-Forward and Reverse - Range 28 mile/h (13 km/h)
-Forward and Reverse - Range 1*1-13 km/h (0.6-8 mph)
-Other Choices Include20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
-Standard Size20.5 R25, radial (L-3)
-Maximum Flow - Steering Pump34 gal/min (130 l/min)
-Transmission - Gear Box2.2 gal (US) (8.5 l)
-Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure4061 psi (28000 kPa)
-Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure4061 psi (28000 kPa)
-Axles - Front6.9 gal (US) (26 l)
-Relief Pressure - Tilt Cylinder4351 psi (30000 kPa)
-Note*Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
-Maximum Flow - Implement Pump - 4th Function Maximum Flow*42 gal/min (160 l/min)
-Reach - Bucket at 45°*4.67 ft (1424 mm)
-Axles - Rear6.6 gal (US) (25 l)
-Cooling System7.9 gal (US) (30 l)
-Hydraulic Tank23.8 gal (US) (90 l)
-NoteDEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-Hydraulic System - Including Tank43.6 gal (US) (165 l)
-Fuel Tank51.5 gal (US) (195 l)
-Diesel Exhaust Fluid (DEF) Tank5 gal (US) (19 l)
-Engine Crankcase5.3 gal (US) (20 l)
-Maximum Flow - Implement Pump - 3rd Function*50 gal/min (190 l/min)
-Note (3)Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
-Height - Ground Clearance**1.25 ft (397 mm)
-Height - Ground to Beacon**12.08 ft (3707 mm)
-Height - Ground to Cab**10.92 ft (3340 mm)
-Height - Ground Axle Center**2.17 ft (685 mm)
-Height - Bucket Pin**14.42 ft (4400 mm)
-Dig Depth**5.3 in (135 mm)
-Dump Angle at Full Lift44 degrees
-Height - Overall**18.67 ft (5697 mm)
-Length - Hitch to Front Axle4.92 ft (1500 mm)
-Note (2)**Vary with tire.
-Note (3)Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
-Operating Weight*31876 lb (14459 null)
-Note (1)*Vary with bucket.
-Length - Wheel Base9.83 ft (3000 mm)
-Length - Overall*27.25 ft (8323 mm)
-Length - Rear Axle to Bumper6.5 ft (1993 mm)
-Departure Angle33 degrees
-Clearance - Loadover Height**11.58 ft (3550 mm)
-Rated Net Power - 1,600 rpm - SAE J1349 (Standard Power Mode: Speed Range 1-3*)154 mm H2O (115 kg/mm)
-Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)141 mm H2O (105 kg/mm)
-FrontFixed; Locking differential (standard)
-Rated Net Power - 1,600 rpm - ISO 9249 (DIN) (Standard Power Mode: Speed Range 1-3*)158 mm H2O (116 kg/mm)
-Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)1600 r/min (1600 r/min)
-Maximum Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)162 mm H2O (119 kg/mm)
-Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)160 mm H2O (119 kg/mm)
-RearOscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
-Bucket Capacities - Light Material3.1-5.0 m3 (4.0-6.5 yd3)
-Carry Height - Bucket Pin2 ft (613 mm)
-Clearance - Bucket at 45° *10.42 ft (3177 mm)
-Clearance - Level Bucket**13.33 ft (4073 mm)
-Breakout*18808 lb (8532 null)
-Articulation Angle40 degrees
-Note (1)The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
-Note (2)*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
-Rack Angle at Carry48 degrees
-Rack Angle at Full Lift51 degrees
-Height - Ground to Beacon**12.08 ft (3707 mm)
-Height - Ground to Cab**10.92 ft (3340 mm)
-Height - Overall**19 ft (5802 mm)
-Height - Ground Clearance**1.25 ft (397 mm)
-Height - Ground Axle Center**2.17 ft (685 mm)
-Dump Angle at Full Lift44 degrees
-Height - Bucket Pin**14.42 ft (4400 mm)
-Length - Hitch to Front Axle4.92 ft (1500 mm)
-Length - Overall*27.58 ft (8425 mm)
-Engine ModelCat C7.1 ACERT
-Operating Weight*32136 lb (14577 null)
-Rack Angle at Carry48 degrees
-Note (2)**Vary with tire.
-Note (1)*Vary with bucket.
-Length - Rear Axle to Bumper6.5 ft (1993 mm)
-Length - Wheel Base9.83 ft (3000 mm)
-Dig Depth**5.3 in (135 mm)
-Departure Angle33 degrees
-Turning Radius - Outside of Tires17.67 ft (5402 mm)
-Turning Radius - Over Bucket20.92 ft (6392 mm)
-Width - Bucket9 ft (2750 mm)
-Turning Radius - Inside of Tires9.33 ft (2851 mm)
-Tipping Load - Straight - ISO 14397-1*16430 lb (7453 null)
-Reach - Bucket at 45°*4.42 ft (1350 mm)
-Tipping Load - Full Turn - ISO 14397-1*13934 lb (6320 null)
-Width - Over Tires8.33 ft (2540 mm)
-Width - Tread Center6.25 ft (1930 mm)
-Clearance - Level Bucket**13.33 ft (4073 mm)
-Clearance - Loadover Height**11.58 ft (3550 mm)
-Clearance - Bucket at 45° *10.17 ft (3107 mm)
-Carry Height - Bucket Pin2 ft (613 mm)
-Articulation Angle40 degrees
-Breakout*17246 lb (7823 null)
-Rack Angle at Full Lift51 degrees

Benefits and Features

Standard Equipment

  • POWER TRAIN
  • HYDRAULICS
  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • OTHER STANDARD EQUIPMENT

Optional Equipment

  • OPTIONAL EQUIPMENT

Featured Used Equipment

140HNA
$143,500
View More
938M
$198,000
View More
140M
$178,000
View More
305E2CR
$55,000
View More