SPECS SUMMARY

Maximum Gross Power164 HP (122 kW)
Operating Weight33396 lb (15153 kg)
Bucket Capacities3.0-5.0 m3 (3.9-6.5 yd3)
The Cat 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.


Specifications

-Maximum Gross Power164 HP (122 kW)
-Operating Weight33396 lb (15153 kg)
-Bucket Capacities3.0-5.0 m3 (3.9-6.5 yd3)
-Bore4 in (105 mm)
-Stroke5 in (135 mm)
-Displacement427 in³ (7.01 l)
-ROPSISO 3471: 2008
-FOPSISO 3449: 2005 LEVEL II
-Rear AxleOscillating
-Note (3)*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
-Note (2)Offset rims available to meet European roading requirements.
-Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65± 10.5 degrees
-Rear Axle - Traction Aid - OptionalLimited slip differential
-Front Axles6.9 gal (US) (26 l)
-Engine Crankcase5.3 gal (US) (20 l)
-Diesel Exhaust Fluid (DEF) Tank5 gal (US) (19 l)
-Cooling System7.9 gal (US) (30 l)
-Note (1)Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
-Front AxleFixed
-Tilt Cylinder, Double Acting - Bore Diameter5.9 in (150 mm)
-Tilt Cylinder, Double Acting - Rod Diameter3.5 in (90 mm)
-Tilt Cylinder, Double Acting - Stroke21.9 in (555 mm)
-Full Turn Tip Load18163 lb (8241 kg)
-Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure4061 psi (28000 kPa)
-Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure3626 psi (25000 kPa)
-Brakes - ParkingSpring applied hydraulically released
-Brakes - ServiceInboard wet disc
-Fuel Tank51.5 gal (US) (195 l)
-Front Axle - Traction Aid*Locking differential (standard)
-Maximum Flow - Steering Pump34 gal/min (130 l/min)
-Steering Cylinder, Double Acting - Stroke17.2 in (438 mm)
-Steering Cylinder, Double Acting - Rod Diameter1.6 in (40 mm)
-Steering Cylinder, Double Acting - Bore Diameter2.8 in (70 mm)
-Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited2.8 s (2.8 s)
-Forward and Reverse - Range 1*1-13 km/h (0.6-8 mph)
-Forward and Reverse - Range 28 mile/h (13 km/h)
-Note*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
-Forward and Reverse - Range 425 mile/h (40 km/h)
-Forward and Reverse - Range 317 mile/h (27 km/h)
-Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed2.4 s (2.4 s)
-Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
-Transmission - Gear Box2.2 gal (US) (8.5 l)
-Rear Axles6.6 gal (US) (25 l)
-Hydraulic Tank23.8 gal (US) (90 l)
-Relief Pressure - Tilt Cylinder4061 psi (28000 kPa)
-Maximum Steering Torque - 0° (Straight Machine)37155 ft·lbf (50375 N·m)
-Note (1)Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
-Maximum Working Pressure - Steering Pump3500 psi (24130 kPa)
-Maximum Steering Torque - 40° (Full Turn)27747 ft·lbf (37620 N·m)
-Hydraulic System - Including Tank43.6 gal (US) (165 l)
-Maximum Flow - Implement Pump - 3rd Function*50 gal/min (190 l/min)
-Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4)572 ft·lbf (776 N·m)
-Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)592 ft·lbf (804 N·m)
-Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4)592 ft·lbf (804 N·m)
-EmissionsEngine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
-Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)572 ft·lbf (776 N·m)
-Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)566 ft·lbf (768 N·m)
-Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)160 HP (119 kW)
-Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)162 HP (119 kW)
-Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)566 ft·lbf (768 N·m)
-Note (2)The Blue Angel environmental label is an optional attachment for Europe only.
-Note (1)*Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
-Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4)164 HP (122 kW)
-Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4)166 HP (122 kW)
-Maximum Rated Gross Power - ISO 14396 (DIN)166 HP (122 kW)
-Maximum Rated Gross Power - ISO 14396164 HP (122 kW)
-Maximum Rated Gross Power - Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4)1800 r/min (1800 r/min)
-Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)160 HP (119 kW)
-Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*68 dB(A) (68 dB(A))
-Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*101 dB(A) (101 dB(A))
-Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)157 HP (117 kW)
-Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)1600 r/min (1600 r/min)
-Note (1)*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
-Lift Cylinder, Double Acting - Stroke28.7 in (728 mm)
-Lift Cylinder, Double Acting - Rod Diameter2.6 in (65 mm)
-Lift Cylinder, Double Acting - Bore Diameter4.7 in (120 mm)
-Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time9.3/10.1 seconds
-Maximum Flow - Implement Pump50 gal/min (190 l/min)
-Engine ModelCat® C7.1 ACERT™
-Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
-Note (1)Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
-Maximum Working Pressure - Implement Pump3626 psi (25000 kPa)
-Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)5.1/5.7 seconds
-Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)2.7/2.7 seconds
-Note (4)Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
-Note (3)No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
-Note (2)Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
-Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)156 HP (116 kW)
-Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)158 HP (116 kW)
-Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)1.5/1.7 seconds
-Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)162 HP (119 kW)
-Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)154 HP (115 kW)
-Note (3)*3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.

Benefits and Features

Standard Equipment

  • POWER TRAIN
  • HYDRAULICS
  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • OTHER STANDARD EQUIPMENT
  • EU STANDARD EQUIPMENT

Optional Equipment

  • OPTIONS

Featured Used Equipment

140M
$200,000
View More
279 D
$46,000
View More
938M
$195,000
View More
304ECR
$47,500
View More