SPECS SUMMARY

Net Power - ISO 9249248 mm H2O (185 kg/mm)
Operating Weight42360 lb (19214 null)
Bucket Capacities2.5-9.2 m³ (3.3-12.0 yd³)
The new 950M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 3 and EU Stage IIIA equivalent emission standards.


Specifications

-Net Power - ISO 9249248 mm H2O (185 kg/mm)
-Operating Weight42360 lb (19214 null)
-Bucket Capacities2.5-9.2 m³ (3.3-12.0 yd³)
-Engine ModelCat C7.1 ACERT
-Displacement428 in³ (7.01 l)
-Forward - 14.3 mile/h (6.9 km/h)
-Forward - 27.5 mile/h (12 km/h)
-Forward - 312 mile/h (19.3 km/h)
-Forward - 416 mile/h (25.7 km/h)
-Reverse - 14.3 mile/h (6.9 km/h)
-Reverse - 27.5 mile/h (12 km/h)
-Reverse - 316 mile/h (25.7 km/h)
-Breakout Force40690 lbf (181 kN)
-Centerline of Rear Axle to Hitch5.5 ft (1675 mm)
-Centerline of Rear Axle to Edge of Counterweight6.33 ft (1942 mm)
-Wheel Base11 ft (3350 mm)
-Ground Clearance1.17 ft (367 mm)
-Height - Top of Exhaust Pipe11.17 ft (3413 mm)
-Height - Top of ROPS11.33 ft (3446 mm)
-Height - Top of Hood8.83 ft (2697 mm)
-Tread Width7 ft (2140 mm)
-NoteWeight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering,
-NoteAll dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
-Maximum Width - Over Tires - Loaded9.33 ft (2822 mm)
-Overall Length - Without Bucket24.58 ft (7488 mm)
-Rack Back - Carry Height49 degrees
-Rack Back at Ground42 degrees
-Rack Back - Maximum Lift56 degrees
-Hinge Pin Height at Carry Height2.08 ft (647 mm)
-Lift Arm Clearance at Maximum Lift10.75 ft (3280 mm)
-Note (2)Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-Note*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-Forward - 524.5 mile/h (39.5 km/h)
-Note (1)For a machine configuration as defined under “Weight.”
-Maximum Net Torque - 1,400 rpm726 ft-lb (984 N·m)
-Tread Width7 ft (2140 mm)
-Rack Back at Ground38 degrees
-NoteMaximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
-Lift Arm Clearance at Maximum Lift11.92 ft (3634 mm)
-Maximum Width - Over Tires - Loaded9.33 ft (2822 mm)
-Wheel Base11 ft (3350 mm)
-NoteAll dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
-Overall Length - Without Bucket22.67 ft (6906 mm)
-Rack Back - Maximum Lift59 degrees
-Rack Back - Carry Height46 degrees
-Hinge Pin Height at Maximum Lift13.25 ft (4027 mm)
-Centerline of Rear Axle to Hitch5.5 ft (1675 mm)
-Hydraulic Cycle Time - Total9.1 s (9.1 s)
-Static Tipping Load - Full 40° Turn - With Tire Deflection24262 lb (11005 null)
-Static Tipping Load - Full 40° Turn - No Tire Deflection25926 lb (11760 null)
-Implement Pump TypeVariable Axial Piston
-Implement System - Maximum Operating Pressure4250 psi (29300 kPa)
-Cooling System15.6 gal (US) (59 l)
-Implement System - Maximum Pump Output at 2,150 rpm76 gal/min (286 l/min)
-Peak Gross Torque - 1,400 rpm - SAE J1995777 ft-lb (1053 N·m)
-Peak Gross Torque - 1,400 rpm - ISO 14396774 ft-lb (1050 N·m)
-Maximum Net Power - 2,000 rpm - ISO 9249 - Metric252 mm H2O (185 kg/mm)
-Maximum Net Power - 2,000 rpm - ISO 9249248 mm H2O (185 kg/mm)
-Maximum Net Power - 2,000 rpm - SAE J1349248 mm H2O (185 kg/mm)
-Maximum Power - 2,000 rpm - ISO 14396261 mm H2O (195 kg/mm)
-Maximum Power - 2,000 rpm - SAE J1995263 mm H2O (196 kg/mm)
-Maximum Power - 2,000 rpm - ISO 14396 - Metric265 mm H2O (195 kg/mm)
-Crankcase5.8 gal (US) (22 l)
-Differential - Final Drives - Front11.4 gal (US) (43 l)
-Ground Clearance1.17 ft (367 mm)
-Centerline of Rear Axle to Edge of Counterweight6.83 ft (2071 mm)
-Height - Top of Exhaust Pipe11.17 ft (3413 mm)
-Height - Top of Hood8.83 ft (2697 mm)
-Hinge Pin Height at Carry Height2.58 ft (782 mm)
-Height - Top of ROPS11.33 ft (3446 mm)
-Bucket Range2.5-9.2 m³ (3.3-12.0 yd³)
-With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)70 dB(A) (70 dB(A))
-Fuel Tank72.6 gal (US) (275 l)
-Differential - Final Drives - Rear11.4 gal (US) (43 l)
-Hydraulic Tank33 gal (US) (125 l)
-Transmission11.4 gal (US) (43 l)
-With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)75 dB(A)*
-With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)107 dB(A) (107 dB(A))
-Hinge Pin Height at Maximum Lift14.83 ft (4527 mm)

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

420F2ST
$100,000
View More
930K
$120,000
View More
930K
$115,000
View More
140M
$200,000
View More