SPECS SUMMARY

Net Power - ISO 9249230 mm H2O (171 kg/mm)
Operating Weight42357 lb (19213 null)
Bucket Capacities2.5-9.2 m³ (3.3-12.0 yd³)
The new 950M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards.


Specifications

-Net Power - ISO 9249230 mm H2O (171 kg/mm)
-Operating Weight42357 lb (19213 null)
-Bucket Capacities2.5-9.2 m³ (3.3-12.0 yd³)
-Engine ModelCat C7.1 ACERT
-Displacement428 in³ (7.01 l)
-Forward - 14.3 mile/h (6.9 km/h)
-Forward - 27.5 mile/h (12 km/h)
-Forward - 312 mile/h (19.3 km/h)
-Forward - 416 mile/h (25.7 km/h)
-Reverse - 14.3 mile/h (6.9 km/h)
-Reverse - 27.5 mile/h (12 km/h)
-Reverse - 316 mile/h (25.7 km/h)
-Breakout Force40690 lbf (181 kN)
-Height - Top of Exhaust Pipe11.17 ft (3413 mm)
-Lift Arm Clearance at Maximum Lift10.75 ft (3280 mm)
-Maximum Width - Over Tires - Loaded9.25 ft (2822 mm)
-Hinge Pin Height at Maximum Lift13.25 ft (4027 mm)
-Hinge Pin Height at Carry Height2.08 ft (647 mm)
-Height - Top of ROPS11.33 ft (3451 mm)
-Height - Top of Hood8.83 ft (2697 mm)
-Centerline of Rear Axle to Hitch5.5 ft (1675 mm)
-Rack Back - Maximum Lift59 degrees
-Rack Back - Carry Height49 degrees
-Overall Length - Without Bucket24.58 ft (7488 mm)
-Rack Back at Ground40 degrees
-Tread Width7 ft (2140 mm)
-NoteAll dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
-Centerline of Rear Axle to Edge of Counterweight6.33 ft (1942 mm)
-Wheel Base11 ft (3350 mm)
-Ground Clearance1.17 ft (367 mm)
-Maximum Net Torque - 1,300 rpm858 ft·lbf (1163 N·m)
-Note (3)***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
-Note (2)**For machines in European Union countries and in countries that adopt the “EU Directives.”
-Note (1)*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**104 LWA***
-With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**69 dB(A) (69 dB(A))
-NoteWeight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering,
-NoteMaximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
-Forward - 524.5 mile/h (39.5 km/h)
-Note (2)Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-Note (1)For a machine configuration as defined under “Weight.”
-Rack Back at Ground36 degrees
-Rack Back - Maximum Lift59 degrees
-Rack Back - Carry Height49 degrees
-Tread Width7 ft (2140 mm)
-Wheel Base11 ft (3350 mm)
-NoteThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
-NoteAll dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
-Overall Length - Without Bucket22.67 ft (6906 mm)
-Height - Top of Exhaust Pipe11.17 ft (3413 mm)
-Implement Pump TypeVariable Axial Piston
-Hydraulic Cycle Time - Total8.9 s (8.9 s)
-Static Tipping Load - Full 40° Turn - With Tire Deflection24262 lb (11005 null)
-Implement System - Maximum Operating Pressure4250 psi (29300 kPa)
-Implement System - Maximum Pump Output at 2,150 rpm76 gal/min (286 l/min)
-Crankcase5.8 gal (US) (22 l)
-Cooling System15.6 gal (US) (59 l)
-Static Tipping Load - Full 40° Turn - No Tire Deflection25926 lb (11760 null)
-Peak Gross Torque - 1,300 rpm - SAE J1995911 ft·lbf (1235 N·m)
-Maximum Net Power - 2,100 rpm - SAE J1349230 mm H2O (171 kg/mm)
-Maximum Net Power - 2,100 rpm - ISO 9249 - Metric232 mm H2O (171 kg/mm)
-Maximum Net Power - 2,100 rpm - ISO 9249230 mm H2O (171 kg/mm)
-Maximum Power - 2,100 rpm - ISO 14396249 mm H2O (186 kg/mm)
-Maximum Power - 2,100 rpm - ISO 14396 - Metric253 mm H2O (186 kg/mm)
-Peak Gross Torque - 1,300 rpm - ISO 14396908 ft·lbf (1231 N·m)
-Maximum Power - 2,100 rpm - SAE J1995250 mm H2O (187 kg/mm)
-DEF Tank4.2 gal (US) (16 l)
-Differential - Final Drives - Front11.4 gal (US) (43 l)
-Height - Top of Hood8.83 ft (2697 mm)
-Ground Clearance1.17 ft (367 mm)
-Centerline of Rear Axle to Hitch5.5 ft (1675 mm)
-Height - Top of ROPS11.33 ft (3451 mm)
-Hinge Pin Height at Carry Height2.58 ft (782 mm)
-Lift Arm Clearance at Maximum Lift11.92 ft (3634 mm)
-Hinge Pin Height at Maximum Lift14.83 ft (4527 mm)
-Centerline of Rear Axle to Edge of Counterweight6.33 ft (1942 mm)
-Bucket Range2.5-9.2 m³ (3.3-12.0 yd³)
-Hydraulic Tank33 gal (US) (125 l)
-Fuel Tank72.6 gal (US) (275 l)
-Differential - Final Drives - Rear11.4 gal (US) (43 l)
-Transmission11.4 gal (US) (43 l)
-With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)107 dB(A) (107 dB(A))
-With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)70 dB(A) (70 dB(A))
-With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)75 dB(A)*
-Maximum Width - Over Tires - Loaded9.25 ft (2822 mm)

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

236D
$44,500
View More
938M
$180,000
View More
938M
$195,000
View More
930K
$115,000
View More
140HNA
$90,000
View More