SPECS SUMMARY

Net Power - ISO 9249276 mm H2O (206 kg/mm)
Operating Weight51176 lb (23220 null)
Bucket Capacities3.20-7.40 m3 (4.19-9.68 yd3)
The new 966M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards.


Specifications

-Net Power - ISO 9249276 mm H2O (206 kg/mm)
-Operating Weight51176 lb (23220 null)
-Bucket Capacities3.20-7.40 m3 (4.19-9.68 yd3)
-Engine ModelCat C9.3 ACERT
-Displacement568 in³ (9.3 l)
-Forward - 14 mile/h (6.5 km/h)
-Forward - 28.1 mile/h (13 km/h)
-Forward - 314.6 mile/h (23.5 km/h)
-Forward - 424.5 mile/h (39.5 km/h)
-Reverse - 14.4 mile/h (7.1 km/h)
-Reverse - 28.9 mile/h (14.4 km/h)
-Reverse - 316.1 mile/h (25.9 km/h)
-Reverse - 424.5 mile/h (39.5 km/h)
-Breakout Force38984 lbf (173 kN)
-NoteAll dimensions are approximate and based on L3 XHA2 tires.
-Height - Top of ROPS11.75 ft (3587 mm)
-Maximum Width over Tires9.83 ft (3009 mm)
-Hinge Pin Height at Maximum Lift13.92 ft (4235 mm)
-Height - Top of Hood9.25 ft (2818 mm)
-Hinge Pin Height at Carry2.08 ft (630 mm)
-Lift Arm Clearance at Maximum Lift11.92 ft (3643 mm)
-Height - Top of Exhaust Pipe11.58 ft (3522 mm)
-Rack Back at Ground39 degrees
-Rack Back - Maximum Lift71 degrees
-Rack Back - Carry Height49 degrees
-Tread Width7.33 ft (2230 mm)
-Wheel Base11.67 ft (3550 mm)
-Ground Clearance1.42 ft (434 mm)
-Centerline of Rear Axle to Hitch5.83 ft (1775 mm)
-Centerline of Rear Axle to Edge of Counterweight7.17 ft (2180 mm)
-Overall Length - Without Bucket23.92 ft (7289 mm)
-Maximum Net Power - 1,700 rpm - ISO 9249 - Metric280 mm H2O (206 kg/mm)
-Note (2)**For machines in European Union countries and in countries that adopt the “EU Directives.”
-Note (1)*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-Note (2)Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-Note (3)***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
-With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**108 LWA***
-NoteWeight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering,
-NoteMaximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
-With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**69 dB(A) (69 dB(A))
-Note (1)For a machine configuration as defined under “Weight.”
-NoteThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
-Tread Width7.33 ft (2230 mm)
-Rack Back at Ground42 degrees
-Rack Back - Maximum Lift62 degrees
-Wheel Base11.67 ft (3550 mm)
-Maximum Net Power - 1,700 rpm - ISO 9249276 mm H2O (206 kg/mm)
-Maximum Net Torque - 1,000 rpm1126 ft·lbf (1527 N·m)
-Overall Length - Without Bucket26.58 ft (8109 mm)
-Rack Back - Carry Height50 degrees
-Height - Top of Exhaust Pipe11.58 ft (3522 mm)
-Implement Pump TypeVariable Displacement Piston
-Hydraulic Cycle Time - Total10.1 s (10.1 s)
-Static Tipping Load - Full 37° Turn - With Tire Deflection32329 lb (14668 null)
-Implement System - Maximum Operating Pressure4496 psi (31000 kPa)
-Implement System - Maximum Pump Output at 2,200 rpm95 gal/min (360 l/min)
-DEF Tank4.4 gal (US) (16.8 l)
-Crankcase6.5 gal (US) (24.5 l)
-Cooling System18.9 gal (US) (71.6 l)
-Static Tipping Load - Full 37° Turn - No Tire Deflection34873 lb (15822 null)
-Peak Gross Torque - 1,200 rpm - SAE J19951179 ft·lbf (1599 N·m)
-Maximum Power - 1,800 rpm - ISO 14396307 mm H2O (229 kg/mm)
-Maximum Net Power - 1,700 rpm - SAE J1349 - Metric280 mm H2O (206 kg/mm)
-Maximum Net Power - 1,700 rpm - SAE J1349276 mm H2O (206 kg/mm)
-Maximum Power - 1,800 rpm - ISO 14396 - Metric311 mm H2O (229 kg/mm)
-Maximum Power - 1,800 rpm - SAE J1995311 mm H2O (232 kg/mm)
-Peak Gross Torque - 1,200 rpm - ISO 143961166 ft·lbf (1581 N·m)
-Maximum Power - 1,800 rpm - SAE J1995 - Metric315 mm H2O (232 kg/mm)
-Differential - Final Drives - Front15.1 gal (US) (57 l)
-Differential - Final Drives - Rear15.1 gal (US) (57 l)
-Height - Top of ROPS11.75 ft (3587 mm)
-Height - Top of Hood9.25 ft (2818 mm)
-Ground Clearance1.42 ft (434 mm)
-Hinge Pin Height at Carry2.58 ft (778 mm)
-Hinge Pin Height at Maximum Lift15.75 ft (4793 mm)
-Maximum Width over Tires9.83 ft (3009 mm)
-Lift Arm Clearance at Maximum Lift13.58 ft (4140 mm)
-Centerline of Rear Axle to Hitch5.83 ft (1775 mm)
-Centerline of Rear Axle to Edge of Counterweight8.17 ft (2500 mm)
-Transmission14.3 gal (US) (54 l)
-Hydraulic Tank33 gal (US) (125 l)
-Fuel Tank79.8 gal (US) (302 l)
-With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)109 dB(A) (109 dB(A))
-With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)76 dB(A)*
-Bucket Range3.20-7.40 m3 (4.19-9.68 yd3)
-With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)70 dB(A) (70 dB(A))
-NoteAll dimensions are approximate and based on L3 XHA2 tires.

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

420F2ST
$100,000
View More
143H
$120,000
View More
930M
$160,000
View More
938M
$180,000
View More