SPECS SUMMARY

Net Power - ISO 9249298 mm H2O (222 kg/mm)
Operating Weight51176 lb (23220 null)
Bucket Capacities3.20-7.40 m3 (4.19-9.68 yd3)
The new 966M XE Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. The XE technology improves fuel efficiency by up to 25% over the M Series standard configuration and up to 35% over the K Series standard configuration.** Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards. **Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.


Specifications

-Net Power - ISO 9249298 mm H2O (222 kg/mm)
-Operating Weight51176 lb (23220 null)
-Bucket Capacities3.20-7.40 m3 (4.19-9.68 yd3)
-Engine ModelCat C9.3 ACERT
-Displacement568 in³ (9.3 l)
-Cooling System19 gal (US) (71.6 l)
-Crankcase6.5 gal (US) (24.5 l)
-Transmission16.6 gal (US) (63 l)
-Hydraulic Tank33 gal (US) (125 l)
-Breakout Force38984 lbf (173 kN)
-Centerline of Rear Axle to Hitch5.83 ft (1775 mm)
-Centerline of Rear Axle to Edge of Counterweight7.17 ft (2180 mm)
-Ground Clearance1.42 ft (434 mm)
-Height - Top of Hood9.25 ft (2818 mm)
-Hinge Pin Height at Carry2.08 ft (630 mm)
-Height - Top of ROPS11.75 ft (3587 mm)
-Height - Top of Exhaust Pipe11.58 ft (3522 mm)
-Maximum Width over Tires9.83 ft (3009 mm)
-Hinge Pin Height at Maximum Lift13.92 ft (4235 mm)
-Rack Back - Carry Height49 degrees
-Rack Back - Maximum Lift71 degrees
-Tread Width7.33 ft (2230 mm)
-Overall Length - Without Bucket26.58 ft (8109 mm)
-Wheel Base11.67 ft (3550 mm)
-NoteAll dimensions are approximate and based on L3 XHA2 tires.
-Rack Back at Ground39 degrees
-Rack Back - Carry Height50 degrees
-DEF Tank4.4 gal (US) (16.8 l)
-Note (2)Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-Note (1)For a machine configuration as defined under “Weight.”
-Note (3)***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
-With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)107 dB(A) (107 dB(A))
-NoteWeight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering,
-NoteMaximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
-With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)76 dB(A)*
-Hydraulic Cycle Time - Total10.1 s (10.1 s)
-NoteThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
-Overall Length - Without Bucket23.92 ft (7289 mm)
-NoteAll dimensions are approximate and based on L3 XHA2 tires.
-Maximum Width over Tires9.83 ft (3009 mm)
-Lift Arm Clearance at Maximum Lift13.58 ft (4140 mm)
-Rack Back - Maximum Lift62 degrees
-Wheel Base11.67 ft (3550 mm)
-Tread Width7.33 ft (2230 mm)
-Rack Back at Ground42 degrees
-Lift Arm Clearance at Maximum Lift11.92 ft (3643 mm)
-Ground Clearance1.42 ft (434 mm)
-Bucket Capacities3.20-7.40 m3 (4.19-9.68 yd3)
-With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**67 dB(A) (67 dB(A))
-Note (1)*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-Static Tipping Load - Full 37° Turn - No Tire Deflection34873 lb (15822 null)
-Static Tipping Load - Full 37° Turn - With Tire Deflection32329 lb (14668 null)
-Forward - 27.7 mile/h (12.6 km/h)
-Forward - 14.1 mile/h (6.7 km/h)
-Differential - Final Drives - Rear15.1 gal (US) (57 l)
-Differential - Final Drives - Front15.1 gal (US) (57 l)
-Maximum Net Power - 1,600 rpm - SAE J1349298 mm H2O (222 kg/mm)
-Maximum Net Power - 1,600 rpm - ISO 9249 - Metric302 mm H2O (222 kg/mm)
-Maximum Net Power - 1,600 rpm - ISO 9249298 mm H2O (222 kg/mm)
-Maximum Net Power - 1,600 rpm - SAE J1349 - Metric302 mm H2O (222 kg/mm)
-Peak Gross Torque - 1,200 rpm - SAE J19951275 ft·lbf (1728 N·m)
-Maximum Net Torque - 1,200 rpm1193 ft·lbf (1618 N·m)
-Peak Gross Torque - 1,200 rpm - ISO 143961260 ft·lbf (1708 N·m)
-Forward - 313.5 mile/h (22.1 km/h)
-Forward - 424.5 mile/h (39.5 km/h)
-Centerline of Rear Axle to Hitch5.83 ft (1775 mm)
-Centerline of Rear Axle to Edge of Counterweight8.17 ft (2500 mm)
-Reverse - 317.1 mile/h (28 km/h)
-Height - Top of Exhaust Pipe11.58 ft (3522 mm)
-Height - Top of Hood9.25 ft (2818 mm)
-Hinge Pin Height at Carry2.58 ft (778 mm)
-Height - Top of ROPS11.75 ft (3587 mm)
-Reverse - 27.7 mile/h (12.6 km/h)
-Reverse - 14.1 mile/h (6.7 km/h)
-With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)67 dB(A) (67 dB(A))
-With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**105 LWA***
-Note (2)**For machines in European Union countries and in countries that adopt the “EU Directives.”
-Implement Pump TypeVariable Displacement Piston
-Implement System - Maximum Operating Pressure4496 psi (31000 kPa)
-Fuel Tank79.8 gal (US) (302 l)
-Implement System - Maximum Pump Output at 1,600 rpm102 gal/min (385 l/min)
-Hinge Pin Height at Maximum Lift15.75 ft (4793 mm)

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

140M2
$230,000
View More
140HNA
$110,000
View More
262D
$32,000
View More
316EL
$145,000
View More