SPECS SUMMARY

Net Power - ISO 9249299 mm H2O (223 kg/mm)
Operating Weight54871 lb (24897 null)
Bucket Capacities3.20-9.94 m³ (4.19-13.0 yd³)
The new 972M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards.


Specifications

-Net Power - ISO 9249299 mm H2O (223 kg/mm)
-Operating Weight54871 lb (24897 null)
-Bucket Capacities3.20-9.94 m³ (4.19-13.0 yd³)
-Engine ModelCat C9.3 ACERT
-Displacement568 in³ (9.3 l)
-Forward - 14.2 mile/h (6.7 km/h)
-Forward - 28.1 mile/h (13.1 km/h)
-Forward - 314.4 mile/h (23.2 km/h)
-Forward - 424.5 mile/h (39.5 km/h)
-Reverse - 14.7 mile/h (7.6 km/h)
-Reverse - 29.3 mile/h (15 km/h)
-Reverse - 316.5 mile/h (26.5 km/h)
-Reverse - 424.5 mile/h (39.5 km/h)
-Breakout Force44075 lbf (196 kN)
-Lift Arm Clearance at Maximum Lift12.58 ft (3843 mm)
-Hinge Pin Height at Maximum Lift14.67 ft (4458 mm)
-Hinge Pin Height at Carry2.25 ft (680 mm)
-Maximum Width over Tires9.92 ft (3009 mm)
-Rack Back - Carry Height50 degrees
-Overall Length - Without Bucket25.58 ft (7774 mm)
-NoteAll dimensions are approximate and based on L3 XHA2 tires.
-Height - Top of ROPS11.75 ft (3587 mm)
-Height - Top of Hood9.17 ft (2818 mm)
-Rack Back - Maximum Lift56 degrees
-Rack Back at Ground39 degrees
-Height - Top of Exhaust Pipe11.58 ft (3522 mm)
-Centerline of Rear Axle to Edge of Counterweight8.17 ft (2500 mm)
-Ground Clearance1.42 ft (434 mm)
-Wheel Base11.67 ft (3550 mm)
-Centerline of Rear Axle to Hitch5.83 ft (1775 mm)
-Tread Width7.33 ft (2230 mm)
-NoteThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
-Note (3)***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
-DEF Tank4.4 gal (US) (16.8 l)
-Note (2)Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**108 LWA***
-With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**69 dB(A) (69 dB(A))
-NoteWeight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steering,
-NoteMaximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
-With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)70 dB(A) (70 dB(A))
-Note (1)For a machine configuration as defined under “Weight.”
-Peak Gross Torque - 1,200 rpm - SAE J19951275 ft·lbf (1728 N·m)
-Maximum Net Power - 1,700 rpm - ISO 9249299 mm H2O (223 kg/mm)
-Wheel Base11.67 ft (3550 mm)
-Tread Width7.33 ft (2230 mm)
-Maximum Net Power - 1,700 rpm - ISO 9249 - Metric303 mm H2O (223 kg/mm)
-Maximum Net Torque - 1,100 rpm1220 ft·lbf (1654 N·m)
-Peak Gross Torque - 1,200 rpm - ISO 143961261 ft·lbf (1710 N·m)
-Rack Back - Maximum Lift71 degrees
-Rack Back at Ground41 degrees
-Height - Top of ROPS11.75 ft (3587 mm)
-Implement System - Maximum Pump Output at 2,200 rpm95 gal/min (360 l/min)
-Implement System - Maximum Operating Pressure4496 psi (31000 kPa)
-Implement Pump TypeVariable Displacement Piston
-Cooling System18.9 gal (US) (71.6 l)
-Crankcase6.5 gal (US) (24.5 l)
-Fuel Tank79.8 gal (US) (302 l)
-Differential - Final Drives - Rear15.1 gal (US) (57 l)
-Differential - Final Drives - Front15.1 gal (US) (57 l)
-Hydraulic Cycle Time - Total10.7 s (10.7 s)
-Static Tipping Load - Full 37° Turn - With Tire Deflection35626 lb (16164 null)
-Maximum Power - 1,800 rpm - ISO 14396331 mm H2O (247 kg/mm)
-Maximum Net Power - 1,700 rpm - SAE J1349 - Metric303 mm H2O (223 kg/mm)
-Maximum Net Power - 1,700 rpm - SAE J1349299 mm H2O (223 kg/mm)
-Maximum Power - 1,800 rpm - ISO 14396 - Metric336 mm H2O (247 kg/mm)
-Maximum Power - 1,800 rpm - SAE J1995337 mm H2O (251 kg/mm)
-Static Tipping Load - Full 37° Turn - No Tire Deflection38396 lb (17421 null)
-Maximum Power - 1,800 rpm - SAE J1995 - Metric341 mm H2O (251 kg/mm)
-Hydraulic Tank33 gal (US) (125 l)
-Transmission14.3 gal (US) (54 l)
-Hinge Pin Height at Maximum Lift15.75 ft (4793 mm)
-Hinge Pin Height at Carry2.58 ft (778 mm)
-Height - Top of Hood9.17 ft (2818 mm)
-Lift Arm Clearance at Maximum Lift13.5 ft (4140 mm)
-Maximum Width over Tires9.92 ft (3009 mm)
-Overall Length - Without Bucket26.67 ft (8109 mm)
-NoteAll dimensions are approximate and based on L3 XHA2 tires.
-Height - Top of Exhaust Pipe11.58 ft (3522 mm)
-Ground Clearance1.42 ft (434 mm)
-With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)109 dB(A) (109 dB(A))
-Note (2)**For machines in European Union countries and in countries that adopt the “EU Directives.”
-Note (1)*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)76 dB(A)*
-Bucket Range3.20-9.94 m³ (4.19-13.0 yd³)
-Centerline of Rear Axle to Hitch5.83 ft (1775 mm)
-Centerline of Rear Axle to Edge of Counterweight8.17 ft (2500 mm)
-Rack Back - Carry Height49 degrees

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

420F2ST
$105,000
View More
236D
$44,500
View More
938M
$198,000
View More
938M
$198,000
View More