SPECS SUMMARY

Net Power373 mm H2O (278 kg/mm)
Operating Weight98806 lb (44818 null)
Bucket Capacities5-10.3 m3 (6.5-13.5 yd3)
Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The new 986K builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.


Specifications

-Net Power373 mm H2O (278 kg/mm)
-Operating Weight98806 lb (44818 null)
-Bucket Capacities5-10.3 m3 (6.5-13.5 yd3)
-Engine ModelCat® C15 ACERT™
-Bore5.4 in (137 mm)
-Stroke6.75 in (171.5 mm)
-Displacement927 in³ (15.2 l)
-Bucket Capacity Range5-10.3 m3 (6.5-13.5 yd3)
-Transmission TypeCat Planetary Power Shift
-Forward - 15 mile/h (7.3 km/h)
-Forward - 28 mile/h (12.2 km/h)
-Reverse - 15 mile/h (7.6 km/h)
-Reverse - 28 mile/h (13.6 km/h)
-FrontFixed
-RearTrunnion
-Oscillation Angle±12.5°
-Rack Back4.5 s (4.5 s)
-Raise9 s (9 s)
-Dump3.5 s (3.5 s)
-Total Hydraulic Cycle Time21.3 s (21.3 s)
-Fuel Tank141 gal (US) (535 l)
-Crankcase9 gal (US) (34 l)
-Transmission20 gal (US) (75 l)
-Hydraulic System - Tank Only34 gal (US) (130 l)
-Ground to Top of Exhaust Stacks13.3 ft (4060 mm)
-Ground to Top of Hood10.7 ft (3270 mm)
-Maximum Overall Height - Bucket Raised22.4 ft (6817 mm)
-Ground to Lower Hitch Clearance1.5 ft (459 mm)
-Ground to Top of ROPS13.5 ft (4100 mm)
-NoteSpecs are calculated with a 6.1 m3 (8.0 yd3) rock bucket.
-B-Pin Height - Maximum Lift16.1 ft (4912 mm)
-Wheel Base12.5 ft (3810 mm)
-Maximum Overall Height - Bucket Raised23.9 ft (7276 mm)
-Maximum Overall Length38 ft (11591 mm)
-Front Axle Centerline to Bucket Tip13.8 ft (4201 mm)
-Ground to Center of Front Axle3.2 ft (978 mm)
-Ground to Top of ROPS13.5 ft (4100 mm)
-Clearance at Maximum Lift10.1 ft (3079 mm)
-Rear Axle - Centerline to Bumper10.3 ft (3132 mm)
-Reach - Maximum Lift7.4 ft (2248 mm)
-Ground to Fuel Tank Clearance2.3 ft (691 mm)
-Ground to Top of Hood10.7 ft (3270 mm)
-Rear Axle - Centerline to Bumper10.3 ft (3132 mm)
-Rated Payload - Standard (Loose Material)14 t (12.7 t)
-Rated Payload - Standard (Quarry Face)11 t (10 t)
-Rated Payload - High Lift (Quarry Face)11 t (10 t)
-Rated Payload - High Lift (Loose Material)12.1 t (11 t)
-Operating Weight - Standard97785 lb (44355 null)
-ROPS/FOPSROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
-Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only)6 gal (US) (23 l)
-Operator Sound Level - ISO 639670 dB(A) (70 dB(A))
-Direct Drive - Reverse 425.4 mile/h (40.8 km/h)
-Machine Sound Level (ISO 6395)110 dB(A) (110 dB(A))
-Operator Sound Level - ISO 639672 dB(A) (72 dB(A))
-Machine Sound Level (ISO 6395)112 dB(A) (112 dB(A))
-Operating Weight - High Lift104005 lb (47175 null)
-Rated Speed - 2,000 rpm - SAE J1349 (DIN)378 mm H2O (278 kg/mm)
-Wheel Base12.5 ft (3810 mm)
-Peak Power Speed - 1,600 rpm - ISO 14396449 mm H2O (335 kg/mm)
-Ground to Top of Exhaust Stacks13.3 ft (4060 mm)
-Reach - Maximum Lift7.1 ft (2175 mm)
-NoteSpecs are calculated with a 6.1 m3 (8.0 yd3) rock bucket.
-Peak Power Speed - 1,600 rpm - ISO 14396 (DIN)455 mm H2O (335 kg/mm)
-Rated Speed - 2,000 rpm - EEC 80/1269373 mm H2O (278 kg/mm)
-Rated Speed - 2,000 rpm - SAE J1349373 mm H2O (278 kg/mm)
-Rated Speed - 2,000 rpm - ISO 9249 (DIN)378 mm H2O (278 kg/mm)
-Rated Speed - 2,000 rpm - ISO 9249373 mm H2O (278 kg/mm)
-Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)378 mm H2O (278 kg/mm)
-Maximum Overall Length36.6 ft (11143 mm)
-ISO 5010:2007 - Maximum Flow at 1,400 rpm52 gal/min (200 l/min)
-Direct Drive - Reverse 29 mile/h (14.1 km/h)
-Direct Drive - Forward 424 mile/h (39 km/h)
-Direct Drive - Forward 314 mile/h (22 km/h)
-Direct Drive - Forward 28 mile/h (12.7 km/h)
-Direct Drive - Reverse 316 mile/h (25 km/h)
-Lift Cylinder - Bore7.5 in (190 mm)
-Maximum Flow at 2,165 rpm123 gal/min (470 l/min)
-Lift/Tilt System - Pump2 × 110 cc variable displacement
-Lift/Tilt System - CircuitLoad Sense
-Lift Cylinder - Stroke45 in (1138 mm)
-Rated Payload - Quarry Face11 t (10 t)
-Rated Payload - Loose Material (Standard)14 t (12.7 t)
-Peak Power Speed - 1,600 rpm - SAE J1995 (DIN)462 mm H2O (340 kg/mm)
-Peak Power Speed - 1,600 rpm - SAE J1995456 mm H2O (340 kg/mm)
-Gross Power - ISO 14396449 mm H2O (335 kg/mm)
-EmissionsU.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, and Brazil MAR-1
-Peak Torque - 1,200 rpm - SAE J19951778 lb/ft (2411 N·m)
-Torque Rise16%
-Rated Payload - Loose Material (High Lift)12.1 t (11 t)
-Cat Truck Match - Standard770/735/740/745
-Cat Truck Match - High Lift772/773
-Relief Valve Setting - Lift/Tilt4050 psi (27900 kPa)
-Tilt Cylinder - Bore6.7 in (170 mm)
-Oscillation Angle - Chain Arrangement±8.5°
-Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-ISO 5010:2007 - Total Steering Angle70°
-ISO 5010:2007 - Steering System - PumpPiston, variable displacement
-B-Pin Height - Maximum Lift17.6 ft (5371 mm)
-Clearance at Maximum Lift11.6 ft (3538 mm)
-Ground to Fuel Tank Clearance2.3 ft (691 mm)
-Ground to Center of Front Axle3.2 ft (978 mm)
-Front Axle Centerline to Bucket Tip15.3 ft (4649 mm)
-ISO 5010:2007 - Steering System - CircuitLoad Sense
-ISO 5010:2007 - Steering Cutoff Pressure4000 psi (27600 kPa)
-Axle Oil - Differentials and Final Drives - Front49 gal (US) (186 l)
-Lower Float Down4.3 s (4.3 s)
-Lower5.2 s (5.2 s)
-Tilt Cylinder - Stroke28.4 in (722 mm)
-Axle Oil - Differentials and Final Drives - Rear45 gal (US) (170 l)
-Cooling Systems26 gal (US) (100 l)
-Hydraulic System Factory Fill87 gal (US) (330 l)
-Fuel Tank - Short Lift127 gal (US) (481 l)
-Ground to Lower Hitch Clearance1.5 ft (459 mm)
-BrakesISO 3450:2011

Benefits and Features

Standard Equipment

  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER

Optional Equipment

  • POWER TRAIN
  • MISCELLANEOUS ATTACHMENTS
  • OPERATOR ENVIRONMENT

Featured Used Equipment

CB54
$130,000
View More
980M
$465,000
View More
140M
$178,000
View More
305E2CR
$55,000
View More