SPECS SUMMARY

Net Power814 mm H2O (607 kg/mm)
Operating Weight220089 lb (99831 null)
Bucket Capacities10.7-12.3 m3 (14-16 yd3)
Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that's both safe to operate, productive and durable. With the introduction of the K Series, we've enhanced the operator's experience and the safety of those working on and around the machine. With both standard and high lift configurations, this machine will pass match with fleets of 775, 777, and 785 trucks. If your operations revolve around the 992 as a loading tool, you'll find everything that's important to your business in the 992K; safety, productivity, cost control and comfort for your people.


Specifications

-Net Power814 mm H2O (607 kg/mm)
-Operating Weight220089 lb (99831 null)
-Bucket Capacities10.7-12.3 m3 (14-16 yd3)
-Engine ModelCat® C32 ACERT™
-Bore5.7 in (145 mm)
-Stroke6.4 in (162 mm)
-Displacement1963.5 in³ (32.1 l)
-Bucket Capacity Range10.7-12.3 m3 (14-16 yd3)
-Transmission TypeCat Planetary Power Shift
-Forward - 14.3 mile/h (6.9 km/h)
-Forward - 27.4 mile/h (11.9 km/h)
-Forward - 312.6 mile/h (20.3 km/h)
-Reverse - 14.7 mile/h (7.6 km/h)
-Reverse - 28.1 mile/h (13.1 km/h)
-Reverse - 313.8 mile/h (22.2 km/h)
-FrontFixed
-RearOscillating
-Oscillation Angle10° ±, 8° ± with Stops
-Total Hydraulic Cycle Time19.3 s (19.3 s)
-Fuel Tank413 gal (US) (1562 l)
-Transmission45 gal (US) (169 l)
-Rack Back Angle - Carry52.7 degrees
-Maximum Overall Length52 ft (15736 mm)
-Rack Back Angle - Ground Level43.4 degrees
-Maximum Overall Height - Bucket Raised30.5 ft (9313 mm)
-Tread Width10.83 ft (3302 mm)
-Rear Axle - Centerline to Bumper13.76 ft (4195 mm)
-Reach - Maximum Lift6.95 ft (2118 mm)
-Rear Axle - Centerline to Bumper13.76 ft (4195 mm)
-Rack Back Angle - Maximum Lift65 degrees
-Ground to Top of ROPS18.63 ft (5678 mm)
-Clearance at 50° Dump (Tooth Tip)14.7 ft (4480 mm)
-Dump Angle at Maximum Lift50 degrees
-Ground to Lower Hitch Clearance2.24 ft (682 mm)
-Ground to Center of Axles4.44 ft (1352 mm)
-B-Pin Height - Maximum Lift22.73 ft (6927 mm)
-Wheel Base19.32 ft (5890 mm)
-Ground to Top of Hood13.26 ft (4043 mm)
-Tread Width10.83 ft (3302 mm)
-Ground to Top of Exhaust Stacks17.22 ft (5248 mm)
-Ground to Bumper Clearance3.86 ft (1176 mm)
-Note (Tier 2 Equivalent) (1)These ratings apply at 1,750 rpm when tested under the specified standard conditions.
-Air Conditioner Oil0.071 gal (US) (0.268 l)
-Air Conditioner Refrigerant6 lb (2.72 null)
-Operating Weight - Standard220089 lb (99831 null)
-Operating Weight - High Lift221847 lb (100628 null)
-Total Steering Angle86°
-Cooling Systems77 gal (US) (290 l)
-Differential - Final Drives - Front95 gal (US) (360 l)
-Hydraulic System - Steering42 gal (US) (159 l)
-Machine Sound Power Level - Sound Suppressed Machine ConfigurationThe machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s
-Hydraulic System - Implement86 gal (US) (326 l)
-Engine Crankcase32 gal (US) (120 l)
-Differential - Final Drives - Rear91 gal (US) (345 l)
-Steering Cycle Times - Low Idle6.4 s (6.4 s)
-Steering Cycle Times - High Idle4.4 s (4.4 s)
-Emissions (Tier 2 Equivalent): Rated Speed1750 r/min (1750 r/min)
-Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396884 mm H2O (659 kg/mm)
-Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J19954796 r/min (4796 r/min)
-Emissions (Tier 2 Equivalent): Net Power - SAE J1995814 mm H2O (607 kg/mm)
-Emissions (Tier 2 Equivalent): Gross Power - ISO 14396884 mm H2O (659 kg/mm)
-Reach - Maximum Lift6.86 ft (2092 mm)
-Note (Tier 2 Equivalent) (2)Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
-Tilt Cylinder - Stroke80.9 in (2055 mm)
-Torque Rise30%
-Note (Tier 4 Final) (2)Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
-Note (Tier 4 Final) (1)These ratings apply at 1,750 rpm when tested under the specified standard conditions.
-Wheel Base19.32 ft (5890 mm)
-Dump Angle at Maximum Lift50 degrees
-Lift Cylinder - Bore11 in (279.4 mm)
-Direct Drive - Reverse 315.4 mile/h (24.8 km/h)
-Direct Drive - Reverse 28.8 mile/h (14.2 km/h)
-Direct Drive - Reverse 14.9 mile/h (7.9 km/h)
-Lift Cylinder - Stroke45.2 in (1148 mm)
-Lift/Tilt System - CircuitPositive Flow Control
-Tilt Cylinder - Bore10.5 in (266.7 mm)
-Relief Valve Setting - Lift/Tilt4500 psi (31000 kPa)
-Maximum Flow at 1,850 rpm254 gal/min (960 l/min)
-Lift/Tilt System - PumpVariable Displacement Piston
-Direct Drive - Forward 314.2 mile/h (22.8 km/h)
-Direct Drive - Forward 28 mile/h (12.9 km/h)
-Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349814 mm H2O (607 kg/mm)
-Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995900 mm H2O (671 kg/mm)
-Emissions (Tier 2 Equivalent): Net Power - SAE J1349814 mm H2O (607 kg/mm)
-Emissions (Tier 2 Equivalent): Gross Power - SAE J1995907 mm H2O (676 kg/mm)
-Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995814 mm H2O (607 kg/mm)
-Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J19954765 r/min (4765 r/min)
-Direct Drive - Forward 1Disabled
-Rated Payload - Standard (Face Material)24 t (21.7 t)
-Rated Payload - High Lift (Face Material)21 t (19.1 t)
-Emissions (U.S. EPA Tier 4 Final): Rated Speed1750 r/min (1750 r/min)
-Dump1.8 s (1.8 s)
-Lower Float Down3.7 s (3.7 s)
-Ground to Top of Exhaust Stacks17.22 ft (5248 mm)
-Ground to Lower Hitch Clearance2.24 ft (682 mm)
-Ground to Center of Axles4.44 ft (1352 mm)
-Ground to Bumper Clearance3.86 ft (1176 mm)
-Ground to Top of Hood13.26 ft (4043 mm)
-Ground to Top of ROPS18.63 ft (5678 mm)
-Rack Back Angle - Ground Level42.8 degrees
-Rack Back Angle - Carry52.5 degrees
-Maximum Overall Length52.81 ft (16095 mm)
-Maximum Overall Height - Bucket Raised33.08 ft (10109 mm)
-Clearance at 45° Dump (Tooth Tip)15.01 ft (4574 mm)
-B-Pin Height - Maximum Lift24.58 ft (7544 mm)
-Machine Sound Power Level - Standard Machine ConfigurationThe machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-Hearing ProtectionHearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-Raise9.4 s (9.4 s)
-Rack Back4.4 s (4.4 s)
-Rack Back Angle - Maximum Lift65 degrees
-Operator Sound Pressure LevelThe operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-Steering System - CircuitPilot, Load Sensing
-Maximum Flow at 1,350 rpm95 gal/min (360 l/min)
-Steering Cut Off Pressure4500 psi (31000 kPa)
-Steering System - PumpPiston, Variable Displacement
-BrakesMeet ISO 3450:2011

Benefits and Features

Standard Equipment

  • POWER TRAIN
  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • SAFETY AND SECURITY
  • OTHER STANDARD EQUIPMENT

Optional Equipment

  • OPERATOR ENVIRONMENT
  • STARTING AIDS
  • MACHINE CONTROL AND GUIDANCE
  • MISCELLANEOUS ATTACHMENTS

Featured Used Equipment

420F2IT
$104,900
View More
420F2ST
$100,000
View More
279 D
$46,000
View More
930K
$139,894
View More
950K
$198,500
View More