SPECS SUMMARY

Flywheel Power - Tractor/Scraper 304 kW (407 hp)
Maximum Power 407 HP (304 kW)
Tractor Cat® C13 ACERT™
Top Speed - Loaded 33.5 mile/h (53.9 km/h)
Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.


Specifications

Flywheel Power - Tractor/Scraper 304 kW (407 hp)
Maximum Power 407 HP (304 kW)
Tractor Cat® C13 ACERT™
Top Speed - Loaded 33.5 mile/h (53.9 km/h)
1 Forward 3.1 mile/h (5 km/h)
2 Forward 5.5 mile/h (8.9 km/h)
3 Forward 7.5 mile/h (12.1 km/h)
4 Forward 10.1 mile/h (16.3 km/h)
5 Forward 13.6 mile/h (21.9 km/h)
6 Forward 18.4 mile/h (29.6 km/h)
7 Forward 24.8 mile/h (39.9 km/h)
8 Forward 33.5 mile/h (53.9 km/h)
Reverse 5.7 mile/h (9.2 km/h)
Bowl Cylinder Bore 5.5 in (140 mm)
Bowl Cylinder Stroke 33.3 in (845 mm)
Ejector Cylinder Bore 4.3 in (110 mm)
Ejector Cylinder Stroke 47.8 in (1213 mm)
Bowl Floor Cylinder Bore 5.1 in (130 mm)
Bowl Floor Stroke 53.3 in (1353 mm)
Cushion Hitch Circuit Flow 10.6 gal/min (40.1 l/min)
Cushion Hitch Cylinder Bore 5.5 in (140 mm)
Cushion Hitch Cylinder Stroke 9.9 in (251 mm)
Elevator Circuit Flow 67.9 gal/min (257 l/min)
Scraper Circuit Flow 50.7 gal/min (192 l/min)
Secondary Steering Circuit Flow 10.3 gal/min (39 l/min)
Steering Circuit Flow 61.8 gal/min (234 l/min)
Steering Cylinder - Bore 5 in (127 mm)
Steering Cylinder - Stroke 44.4 in (1128 mm)
Scraper Capacity - Heaped 23 yd³ (17.6 m³)
Rated Load 55200 lb (25038 kg)
Heaped Capacity 23 yd³ (17.6 m³)
Maximum Depth of Cut 10.3 in (262 mm)
Maximum Depth of Spread 18.3 in (465 mm)
Maximum Ground Clearance at Cutting Edge 20.8 in (529 mm)
Maximum Hydraulic Penetration Force 132640 lb (590 kN)
Struck Capacity 18.8 yd³ (14.4 m³)
Thickness - Cutting Edge 0.9 in (22 mm)
Width - Cut - Outside Router Bits 123.5 in (3136 mm)
Steering Angle - Right 85º
Steering Angle - Left 82º
Standards Standards
Bore 5.1 in (130 mm)
Displacement 763 in³ (12.5 l)
Maximum Power - All Gears - ISO 14396 407 HP (304 kW)
Maximum Power Reference Engine Speed 1700 r/min (1700 r/min)
Stroke 6.2 in (157 mm)
Tractor Engine Cat® C13 ACERT™
Bore 5.1 in (130 mm)
Displacement 763 in³ (12.5 l)
Maximum Power - All Gears - ISO 14396 407 HP (304 kW)
Maximum Power Reference Engine Speed 1700 r/min (1700 r/min)
Stroke 6.2 in (157 mm)
Tractor Engine Cat® C13 ACERT™
Loaded, Based on a Rated Load 143245 lb (64975 kg)
Operating Weight - Full Fuel Tanks 88046 lb (39937 kg)
Shipping Weight - 10% Fuel 86259 lb (39259 kg)
Loaded, Based on a Rated Load 142701 lb (64728 kg)
Operating Weight - Full Fuel Tanks 87499 lb (39689 kg)
Shipping Weight - 10% Fuel 86004 lb (39011 kg)
Cooling System 17 gal (US) (64 l)
Differential 45.8 gal (US) (173 l)
Engine Crankcase 8.75 gal (US) (33 l)
Final Drive - Each 5 gal (US) (19 l)
Hydraulic Reservoir 22 gal (US) (83 l)
Transmission 18.5 gal (US) (70 l)
Windshield Washer Reservoir 1.3 gal (US) (5 l)
Fuel Tank 201.6 gal (US) (763 l)
Non-Powered Wheel 1.1 gal (US) (4 l)