GCM34 | 7725kW-10300kW Natural Gas Generator
SPECS SUMMARY
Maximum Continuous Rating | 10320 / 9830 ekW @ 1.0pf |
Fuel Type | Natural Gas |
Maximum Electrical Efficiency | 47.90% |
Frequency | 50 / 60 Hz |
Specifications
Maximum Continuous Rating | 10320 / 9830 ekW @ 1.0pf |
Fuel Type | Natural Gas |
Maximum Electrical Efficiency | 47.90% |
Frequency | 50 / 60 Hz |
RPM | 750/720 |
Engine Model | G20CM34 |
Displacement | 46484.2 in³ (762.6 l) |
Aspiration | TA |
Bore | 13.38 in (340 mm) |
Stroke | 16.53 in (420 mm) |
Length | 562.2 in (14280 mm) |
Width | 153.9 in (3910 mm) |
Height | 212.2 in (5390 mm) |
Dry Weight - Genset | 164000 kg (361558 lb) |
Frequency | 50/60 Hz |
Benefits and Features
- Robust high speed block design provides prolonged life and lower owning operationg costs
- Designed for maximum performance on low pressure pipeline natural gas
- Simple open chamber combustion system for reliability and fuel flexibility
- Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency
- One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection
- Designed to match performance and output characteristics of Caterpillar gas engines
- Industry leading mechanical and electrical design
- High efficiency
- Meets most worldwide emissions requirements down to 0.5 g/bhp-hr NOx level without aftertreatment
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Simple user friendly interface and navigation
- Digital monitoring, metering and protection setting
- Fully-featured power metering and protective relaying
- Remote control and monitor capability options
- Field proven in a wide range of applications worldwide
- fully prototype tested
- Certified torsional vibration analysis available
- Wide range of bolt-on system expansion attachments
- Factory designed and tested
- Flexible packaging options for easy and cost effective installation
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment
- Separator module
- Pre-pressure module
- Circulation module
- Gas valve unit (GVU) (only dual fuel (DF) and gas)
- Ignition fuel oil module (only dual fuel (DF))
- Engine ventilation module (only dual fuel (DF) and gas)
- Lube oil separator module
- Piping interface module
- Combined module: cooling water system and lube oil system
- Combined module: see lube oil system
- Cooling water system with radiators
- Piping interface module
- Starting air receiver module
- Starting air compressor module
- Air filter - pulse
- Air filter - pocket
- Air filter - oil bath
- Exhaust gas ventilation module (only dual fuel (DF) and gas)
- Exhaust gas silencer
- Oxidation catalytic (Oxicat) converter system
- Selective catalytic reduction (SCR) system
- Motor control center module (MCC)
- Local data panel (LDP) / generator control panel (GCP)
- Gas leak detection per cylinder (only dual fuel (DF) and gas)
- Local control panel (LCP)
- Engine monitoring package
- Elastic mounting - genset/engine