Increase Energy Production

• Reduced resistive losses and an optimized electrical design result in higher energy yield.

More durable / Reliable

• Durability tested for mechanical load; Dynamic + Thermal Cycle + Humidity Freeze
• Harsh evironments; salt mist, amonia, dust and sand.

Warranty

• Standard 25 year warranty on manufacturer defects and a 25 year power output warranty

Tests and Certificates

• IEC 61215, IEC 61730 Class C according to UL790
• UL 61730 Type 3 fire rating
• IEC 61701 (maximum severity) Salt Spray Test
• IEC62716 Ammonia Test
• IEC 60068, Dust and Sand test
• Listings: TUV SUD, CSA, CE
• ISO 9001:2008: ISO Quality Management System
• ISO 14001:2004: ISO Environment Management System
• TS62941: Guideline for module design qualification and type approval
• OHSAS 18001: 2007 Occupational Health and Safety

• 2000 hrs damp heat testing is twice the standard testing hrs. required
• 600 thermal cycling testing is three times the standard cycles required.
• 192 hrs of PID (potential-induced degradation) at 85°C/85RH) is twice the standard testing hrs. required.
• Mechanical Load testing for Dynamic + Thermal Cycle + Humidity Freeze result in much less cell breakage and power loss than static testing alone.
• 60-100 kWh/m2 LID (light-induced- degradation) validates early hour performance.
• LeTID (light and elevated temperature degradation) is a proprietary validation for long term PERC performance.
• Validated for use in harsh environment by IEC testing for salt mist, amonia, dust and sand.