XQ1475G | 1475 kW Generator Rental

Request Info

SPECS SUMMARY

Rating1475 ekW Continuous
Frequency50/60 Hz
Voltage230 - 480 V
EngineCat G3516C Low Emissions Gas Engine
In addition to improved fuel efficiency, the next generation XQ1475G rental generator provides significant power density advantages. Caterpillar developed new exhaust stacks that reduce spacing requirements for sites requiring multiple units. This allows for an increase of 47 percent on-site power density over the previous capabilities.

Specifications

Rating1475 ekW Continuous
Frequency50/60 Hz
Voltage230 - 480 V
EngineCat G3516C Low Emissions Gas Engine
FuelNatural Gas
Width96 in (2438 mm)
Height114 in (2896 mm)
Length480 in (12192 mm)
Weight70372 lb (31920 kg)

Benefits and Features

Extensive range of rental ready features to meet job requirements and applications.

Meets most worldwide emissions requirements down to 500 mg/Nm3 NOx level without after treatment (contact factory for applications requiring 0.5g/hp-hr performance).

Compact, four-stroke-cycle G3516C gas engine provides exceptional dependability, fuel economy and power density Robust kilowatt based air to fuel ratio control system yields enhanced system performance. Designed for maximum performance on low pressure pipeline natural gas of 3-7 psi (0.21 kg/cm² - 0.49 kg/cm²) to the container with a methane number range of 55-100 (contact factory for methane numbers <55). Island mode feature improves engine's capability to handle electrical loading and unloading

EMCP 4.2 control panel offers engine and generator monitoring and protection On-Package Auto Paralleling Controls AGC-4 provides paralleling, load sharing, VFD control, and additional generator protection

Cat SR4B generator designed to match the performance and output characteristics of the Cat Gas engine. Class H insulation operating at Class F temperature for extended life Coastal insulation protection and anti-condensation space heaters Digital Voltage Regulator (Cat DVR) provides enhanced system monitoring

Provides 40⁰C (104⁰F) ambient capability with 500 mg/Nm3 NOx (1g/hp-hr) at 100% continuous rating before derate Variable frequency drive fan controls improve partial load fuel consumption Energy efficient electric drive fan

Meets 72 dB(A) at 15 meters or below per SAE J1074 40' ISO high cube container, 9-high stack CSC certified Service and Personnel doors Externally-accessible controls

Remote monitoring for fleet management and asset tracking.

110% spill containment of onboard engine fluids Positive crankcase fumes ventilation

Generator set manufactured in ISO 9001:2000 compliant facility Package factory designed and production tested

Cat® dealers provide extensive post sale support including maintenance and repair agreements. Supported 100% by the Cat dealer with warranty on parts and labor. Extended Service Coverage (ESC) options available for coverage beyond the Standard Warranty period

Standard Equipment

  • Cat G3516C Island Mode Gas Engine (Operates on 31.5 to 47.2 MJ/Nm3 (800 to 1200 btu/ft3) dry pipeline natural gas) .
  • Double bearing SR-4B brushless, form wound, permanent magnet excited, three-phase with Cat digital voltage regulator (Cat DVR), space heater, 6-lead design, Class H insulation operating at Class F temperature for extended life, winding temperature detectors and anti-condensation space heaters (120/240V 1.2 kW).
  • 40' ISO high cube container, 9-high stack CSC certified.
  • Standard cooling provides 40C (104F) ambient capability with 500mg/Nm3 NOx at 100% Continuous.
  • Controls provide auto paralleling AGC-4 controller, CAN-bus, ethernet comm, PWM and analog outputs, legacy analog load sharing; includes PL1000E gas engine Advisor panel for operational/diagnostic information; cabinet houses shore power transformer, distribution, protection, and internal/external power selector switch.

Optional Equipment

  • Intertie protection provided via utility grade Basler BE1-11i
  • 3-axle chassis
  • Ladders, handrails, internal storage provisions